Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.6 LAccepted-Finance | ₹4.6 L | L1 | Accepted-Finance LOWEST BIDDER |
| 2 | L2₹4.6 L+₹788 (0.17%)Rejected-Finance 118 DHAMAITALA LANE JAGADDAL KOLKATA SONARPUR 700151 | KOLKATA | SOUTH 24 PARGANAS | WEST BENGAL | 700151 | ₹4.6 L+₹788 (0.17%) | L2 | Rejected-Finance HIGHER BIDDER |
| 3 | L3₹4.6 L+₹5,886 (1.29%)Rejected-Finance | ₹4.6 L+₹5,886 (1.29%) | L3 | Rejected-Finance HIGHER BIDDER |
| 4 | L4₹4.6 L+₹5,978 (1.31%)Rejected-Finance | ₹4.6 L+₹5,978 (1.31%) | L4 | Rejected-Finance HIGHER BIDDER |
| 5 | L5₹4.6 L+₹6,442 (1.41%)Rejected-Finance | ₹4.6 L+₹6,442 (1.41%) | L5 | Rejected-Finance HIGHER BIDDER |
Tender Value
₹4.6 L
EMD Value
₹9,268
Closing Date
9 Jul 2026, 11:00 amClosed
Assistant Engineer, Sambhunath Pandit Hospital Su
Office of the Assistant Engineer, Sambhunath Pandit Hospital Sub-Division, P.W.D. 2, Beninandan Street, Kolkata-700025.
Khiddirpore Maternity Home - Emergent repairing of False Ceiling at OT and SNCU Zone, Aluminium partition work at Toilet, Surface restoration work at the courtyard of Old Building, Installation of Sink and Basin with Elbow action bibcock and other 26
2026_WBPWD_5015512_8
WBPWD/SNPHSD/AE/NIT-02 OF 2026-2027
Open Tender
CIVIL WORKS
Percentage
15 days
SNPH
Please refer Tender documents.
6 documents required · 6 mandatory
₹9,268
Yes
20 Aug 2026
17 Jun 2026
11 Jul 2026
17 Jun 2026
9 Jul 2026
17 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supplying,fitting & fixing in position suspended false ceiling with frame work of aluminium hollow section of size 50mm X 25mm (2.0mm thickness) combined with aluminium corners of size 38mm X 25mm, suspended by aluminium hollow tube section of size 38mm X 25mm having size of 600mm X 600mm ceiling with aluminium composit panels (ACP) - Interior grade of thickness 3.0mm comprising of proctective film, polyester coating, primer, aluminium coil, adhesive film, polyethylene core again with one layer adhesive film, aluminium bottom coating and finally service coating as per manufacturer's specification finished with aluminium screw and silicon sealent complete in all respect including all incidental charges etc. as per direction of Engineer-in-charge. | 39.41 | Sqm | - | - |
| 2 | Taking out Mirzapur or glazed porcelain tiles carefully by chiselling from walls or floor including stacking serviceable material as directed.
Courtyard | 75.6 | Sqm | - | - |
| 3 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.
In Ground floor including roof.
(a) upto 150 mm. thick | 11.34 | Cum | - | - |
| 4 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.
a) Pakur Variety | 7.56 | Cum | - | - |
| 5 | (A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
(B) Do - by fine sand | 22.68 | %Cum | - | - |
| 6 | Supplying and laying in the specified pattern of Interlocking Concrete Block Pavements (ICBP) with concrete Blocks…. Fitting up of the edge gap.
50 mm thick. | 75.6 | Sqm | - | - |
| 7 | Supplying solid flush type doors of commercial quality, the timber frame
consisting of top and bottom rails and side styles of well seasoned timber 65mm
wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or
similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor.
(a) 35 mm thick shutters (single leaf) | 2.52 | Sqm | - | - |
| 8 | Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws:
(v) 100 x 63 x 3.2mm. | 24 | Each | - | - |
| 9 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved
manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:
(iii) 100mm long x 10mm dia. bolt. | 26 | Each | - | - |
| 10 | i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.
(c) 300mm long. | 12 | Each | - | - |
stage.html
html • 0.11 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.46 MB
WBF2911.pdf
Tender Documents • 1.87 MB
BOQ_5084390.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .