Establishment of Study Center at old Library building at Silvassa.

Amount

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar.

Providing material and labour for laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand broken stone aggregates 40 mmnominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth.

Providing material and labour for Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in superstructure above plinth level upto floor two level in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional

Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C member including stacking of serviceable material and disposal of unserviceable from site of work with all lead and lift

Providing material and labour for 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (iii) Cement mortar 1:6 (1-cement:6-sand)

Providing and fixing PVC Printed pain colour false ceiling with grid type with alluminium frame consisting of 600mm x 600mm 3mm thick plain PVC sheet used as panel insert in a frame work made using anodized alluminium T section of size 1 x 1 (235 x 25mm, 19 gauge or 1 mm thick) in square pattern of grid sizes of 2 x 2 (600 x 600mm) The alluminium frame work is supported from the cceiling with the help of G.I. hook and G.I. wire/6mm M.S. rods of required sizes to maintain proper level etc. The aluminium frame work is supported on side wall with the use of alluminium L section of size 1 x 1 (25 x 25mm) angles etc. complete as per direction of Engineer in charge. Manufactures specification and drawing.

WATER PROOFING TREATMENT : Cleaning existing Terrace Surface, Providing and laying Waterproofing Treatment in DOUBLE LAYER to Terrace with APP (Atactic Polypropylene polymer) Modified Pre-Fafabricated Five layer Water proofing Membrane, HYDROSTOP of TIKIDAN make, comprising of 1st layer of 3mm thick and Minimum 3.5 Kg / m2 Weight Membrane HYDROSTOP 3 FGP, Upper and bottom surface finished in plastic Polyethylene Film and having Reinforcement of Fibre Glass at Core and 2nd Layer of 3mm Thick and Minimum 3.5 kg/m2 Weight Membrane HYDROSTOP 3 PYM, Upper surface finished in Minerals and Bottom surface finished in plastic Polyethylene film and having reinforcement of Non Woven polyester Matt at core, including a coat of bitumen primer TIKI PRIME S for Bitumen Membranes Manufactured to IS : 3384. Over the dried Primer Coat, Laying APP Membrane HYDROSTOP in DOUBLE LAYER using Butane Torch, the 1st Layer torch Bonded to the Primed Surface followed by Torch Bonding of 2nd Layer to the first, while maintaining the side Overlaps 100mm and END Overlaps 150mm, sealing all overlaps etc. complete, including treatment at all juctions and corners to accomodate stresses with 300mm Wide strips of 3mm HYDROSTOP 3 PYP and treatment over the Vertical Plane upto 200 mm height above the Finished Floor level with 3mm APP Membrane HYDROSTOP 3 PYM, the Waterproofing Membrane terminated by tucking it into the groove made on Vertical Plane, the groove sealed with cement : Sand Mortar, etc. all complete.

Providing material and labour for fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing material and labour for fixing Fly proof galvanised M.S. wire gauge of I.S.l gauge designation 85 G. with wire of dia.0.56 mm to windows and celevating windows including 60 x 20mm beading of teak wood.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe line.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(G)110 mm

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wal with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down Bib Tap. (i) 15mm dia.

Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. complete.(i) 20mm dia.

Providing and fixing wash down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in white colour

Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild brackets, complete with fittings such as lead valve less syphon, 15mm nom.naI size brass ball valve with polythene float, C.P brass handle unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately)(A) Vitreous China (I) In white colour

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including sutting holes and making good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.

Providing material and labour for Painting one coats (excluding priming coat) on previously painted steel and other metal surface with enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

Providing material and labour for Painting two coats (excluding priming coat) on previously painted wood and wood based surface with enamel paint, to give an even shade including cleaning the of all dirt, dust and other foreign matter.

Providing material and labour for Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand broken stone aggregates 40 mmnominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

Removing and Re-fixing of old paver blocks including 35 mm stone dust layer for levelling and filling the joint with stone dust in proper line and level as directed by Engineer-in-charge.

Providing and fixing M.S. grills/Square/Rectangular bars for compound gate of required pattern fixing in RCC Column etc. with M.S. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws (A) Plain Grill/Square/Rectangular bars as per design and direction of Engineer-in-charge.

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy erected on existing hook or clamp with earthing. [Make shall be approved by Engineer in charge]

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge.(1)One No. SP 6 Amp.

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge.(2) One No 5 pin plug

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge.(5) Electronic hum Free four or more steps EME Fan regulator

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge.(22) 16/20/25 Amp. Modular Starter for Motor / A.C. Unit Complete

Providing and erecting approved make split air-conditioning unit consisting of copper condensing unit with fan motor, hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means of extra supplied proper insulated copper tubing,drain PVC pipes suitable for ( cost includes powder coated Stand, Eco Friendly green gas charging, 15A plug top & Remote Control) with necessary core cutting. For 3 Star Rating of current year (c) for 2 ton capacity

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper wires of following size to be erected as directed. (g) 2.50 Sq.mm 2 core round PVC sheathed

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (A) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (b) sheet steel double door (IP-43) (iii)8 way

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel double door (i) 4 way

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity (B) 40 Amp.

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity (c)63 Amp.

HWCIHNVR1820 20 Channel 1U 2HDDs Network VideoRecorder·userinterface, Securitybaseline 2.1 H.264, H.265, Smart H.264+, and Smart H.265+. H.265 , H267+auto switch · Max. decoding capability : 20×1080p@30fps. Supports adaptive decoding · Supports main stream camera sof ONVIF and RTSP protocols, 8 SATA P2 P remote surveillance, video play on mobile device· VGA/HDMI simultaneous video output, maximum resolution of HDMIis 4KSupply, installation, testing and commissioning of Professional 20 Channel NVR with video input as required for Camera mentioned above in Item no. 1,2,3. Third-party network cameras supported, H.264Compression-Upto5Megapixels resolution recording, Hard Disk of minimum 6 TB as required for minimum 30 days when recording in motion @ 2CIF, 12 Frames per second (Real time). Internal storage capacity in IP Cameras for mitigating risk of IP link breakdown. HDD quota and group management, 2 SATA interfaces, 2 USB2.0, Recording on Motion, Scheduled or Alarm based. Remote backup through TCP/IP, HTTP Networkable,backupbyUSB/DVDWR, 3rd ONVIF. Honeywell,Axis,Pelco complete in all respects and to the entire satisfaction of Architects and Engineer-in- Charge

Supply, Installation, Testing & Commissioning OF2 MPIRIndoor Dome Fixed Camera -1/3.8"Progressive Scan CMOS,2.8mmFixedlens,0.01Luxat F1.2, ICR, ONVIF, support H.265,H.264, MJPEG, 120db WDR, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, Support on-board storage up to 256 GB (SD card not included), IP67, IK10, Intrusion detection, Motion detection, Scene change detection, Audio exception detection, video tampering, UL, FCC certified. Honeywell,Axis,Pelco.complete in all respects and to the entire satisfaction of Architects and Engineer-in-Charge

Supply, Installation, Testing & Commissioning OF2 MPIRbullet Fixed Camera -1/3.8"Progressive Scan CMOS, 2.8mmFixedlens,0.01Luxat F1.2, ICR, ONVIF, support H.265, H.264, MJPEG, 120db WDR, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, Support on-board storage up to 256 GB (SD card not included), IP67, IK10, Intrusion detection, Motion detection, Scene change detection, Audio exception detection, video tampering, UL, FCC certified. Honeywell, Axis, Pelco.complete in all respects and to the entire satisfaction of Architects and Engineer-in- Charge

SUPPLY AND INSTALLATION 6TB WD Purple Make: wd / Seagate

Supply, installation, testing and commissioning of D16-Port Gigabit Unmanaged POE Switch with 16+2-Port PoE Support eight 10/100/1000Mbps PoE Ethernet ports,andtwo10/100/1000Mbps Ethernet ports · Operating Temperature: –10°C to + 55°C · PoE Power Requirement:48VDC–57VDCInput

Supply, installation, testing and commissioning 9 U DVR RACK WTH POWER DISTRUBUTION UNIT AND EXAUST FAN

Supplyand installationof CAT 6 Cablewith standardcasingcapingconduitpipingwithall kindsofbands/ joint/ bracketsandcomplete Ericson

SupplyandinstallationRJ45ConnectorsNT

Supply, installation, testing and commissioning of 24 ULOADED LIU rack mounted CAT6 CABLE

Supplyandinstallationsofcat6patchcord1 meter d-link

Supply and installation of LED 55” Make: LG / Samsung

Supply and installation 1 KVA UPS

Supply and installation l HDMI Cable 5 meter

Supply and installation of 5*5 classic junction box

Supply, installation, testing and commissioning of 8 -Port Gigabit Unmanaged POE Switch eight 10/100/1000Mbps PoE Ethernetports, and two 10/100/1000Mbps Ethernetports· Operating Temperature: –10°C to + 55°C · PoE Power Requirement: 48V DC–57V DC Input

Project Management and Documentation charges

Providing and Supplying GODREJ WISH RECTA WORKSTATION SIZE 900X600X750 Providing and Fixing 52.4mm Thick 1200mm high Panels in Wish System and 22.4 mm on aisle side/return side with combination of Metal raceway at bottom, two intermediate fabric blocks, Fabric tackable, White board, fabric Magnetic at top, providing Powder coated legs, CPU trolley and KBPT. Approved Make : Godrej/Herman Miller/Haworth/Knoll

Providing and Supplying Godrej Insight reading table. Insight 1800 W size shall be 1800W X 900D X 740H mm . The top shall be 25 mm thick PLB with 2 mm thick PVC Edge Beading plus the Understructure shall be having C - Frames 1.6 mm thick MS supporting the top . The Legs shall be of dia. 38.1 x 1.6 mm thick MS ERW tube. Approved Make : Godrej/Herman Miller/Haworth/Knoll

Providing and Supplying Godrej Insight reading table. Insight 900 W size shall be 900W X 900D X 740H mm . The top shall be 25 mm thick PLB with 2 mm thick PVC Edge Beading plus the Understructure shall be having C - Frames 1.6 mm thick MS supporting the top . The Legs shall be of dia. 38.1 x 1.6 mm thick MS ERW tube. Approved Make : Godrej/Herman Miller/Haworth/Knoll

Providing and Supplying Godrej Earl Visitor chair. SEAT/BACK ASSEMBLY: The seat and back should be made up of 1.2 ±0..1 cm. thick hot pressed plywood and upholstered with fabric and moulded Polyurethane foam with PVC lipping all around. The back foam should be designed with contoured lumbar support for extra comfort.BACK SIZE: 49.5cm. (W) X 45.5cm. (H) SEAT SIZE: 49.5cm. (W) X 43.0cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+1-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. ARMRESTS: The one-piece armrests made of black integral skin polyurethane with 50-70 Shore Hardness and reinforced with M.S. insert. The armrests should be scratch and weather resistant tant. The armrests should be fitted to the seat with seat armrest connecting bracket made of 0.3 ±0.022cm. thk. HR steel. FIXED TYPE mechanism: The fixed type mechanism should be without back tilt.TUBULAR UNDERSTRUCTURE: The understructure should be made of Ø2.54 2.54±0.03cm.x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and black powder coated (DFT 40-60 microns)SeatHeight -45.0cm.Height -84.0cm.Width & Depth of Chair as measured from pedestal - Width-55.0 cm and Depth-58.0 cm Approved Make : Godrej/Herman Miller/Haworth/Knoll

Dharmik construction (BID ID -20425)

Kuvarji B Parmar (BID ID -20432)