COMPREHENSIVE REPAIR WORK and REPAIR TO MAINTENANCE OF INTERNAL ELECTRIFICATION WITH FITTING/FIXTURE OF OTM OF ZONE E AND F AT MIL STN SGNR

Amount

Dismantling brick tiles or terracing tiles, single layer on roofs complete all as specified and directed by Engineer - in - Charge.

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and as directed by Engr-in-charge.

Material and Labour for scraping and wire brushing and cleaning top surface of roof or cement concrete and applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.75Kg per Sqm complete all as specified and directed by Engr-in-Charge.

M&L water proofing treatment on cleaned RCC roof comprising with the following operation and as specified here-in-below :- (a) 20 mm thick (av. mimimum thickness) plastering in cement mortar 1:3 with integral WPC, finishing the plastered surfaces even and smooth over cleaned RCC roof. The plastered surface shall be cured properly for ten days by ponding of water over roof. (b) Applying bitumen primer over the plastered surface @ 0.40 Ltr / Sqm by the same membrane manufacturer of density at 25°C, 0.87 to 0.89 kg / Liter and viscosity 70-160 cps. (c) Providing and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated three layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt make as approved over the primer coat. Membrane shall be laid using butane torch and sealing all joints etc all as per Para 11.44.5 of SSR Part I. (d) Applying one coat of Aluminium paint @ 0.1 ltr per Sqm over APP based polymetric membrane complete all as per manufacturer's instruction.

Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 8-10 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. complete all as specified and directed by Engineer - in - Charge.

Demolition of cement concrete (unreinforced) any description and in any position for sunken portion (below or above ground level) complete all as specified and directed by Engr-in-Charge.

M&L for water proofing treatment to RCC sunken slab (not exceeding 45cm depth of sunken) as specified below complete all as specified and directed by Engineer-in-Charge:- (a) applying 15 mm plaster in CM 1:3 with WPC on raised verticle surface (b) Cleaning the surface with wire brush/coir brush, removing lose material like dust particles, dirt etc. (c) Creating fillet coving of 50x50 mm with polymer modified mortar on the junction of slab and walls (d) Apply first coat of two component modified polymer coating on the horizontal and verticle surface (e) Provision of glass fiber mesh of 2x2 mm immediately on above coating (f) Apply second coat of two component modified polymer coating after 72 hrs (g) Cement concrete 1:4:8 D2 75 mm thick over the coating as per requirment (h) Joining the saintary pipes with the water proofing tape having bridging ability of more than 1.5 mm (j) Filling the gap between the wall opening and saintary pipe with non shrink cementatious grout complete all as specified and directed by Engineer-in-Charge. Note: (i) PCC filling in sunken portion will be measured seperately. (ii) The cost of WPC shall be included in lump-sum quoted rate.

M&L for PCC (1:5:10) type E-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete or filling in sunken floor complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L 450x300 x7 mm thick glazed ceramic coloured tiles as in vertical sufaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles and incliding 10mm thick backing coat in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M&L Non- skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles and incliding 15mm thick screed in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M & L machine cut kota stone slab flooring 20-25mm thick (minimum size 55 cms x 55 cms) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing including 15mm of screed bed in CM 1:4. complete all as specified and directed by Engr-in-Charge.

M&L machine cut kota stone slabs as in vertical surfces such as risers of steps 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing also moulding edges including 10mm of backing coat in CM 1:4, complete all as specified and directed by Engr-in-Charge.

M & L granite (of any type) work 20 mm thick (table rubbed and polished) in cooking platforms and like in thickness 15mm thick screed bed with cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including complete all as specified and directed by Engr-in-Charge.

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed in CM 1:6 complete all as specified and as directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge.

M & L for steel / Iron work as in roof truss /doors or gates of angle or other section with gusset plates, rails, braces, iron sheets for cupboard etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (including of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-290(Grade-165) complete all as specified and directed by Engr-in-Charge.

Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed by Engineer-in-Charge.

Providing precast RCC Jallies any shape (cement concrete type B0 1:2:4 12.5mm gragded aggregate) louvres and jallies, 40 mm thick (measured solid), including all mouldings set in CM 1:4 and precast pillar all as specified and directed by Engr-in-Charge.

Demolition concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.

M&L75 mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) filling and mass concrete complete all as specified and directed by Engr-in-Charge.

M&L 25mm thick cement concrete flooring type B0, 1:2:4 using 12.5 mm graded aggregate finished even and fair complete all as specified and directed by Engr-in-Charge.

M&L for sand filling (25mm thick) under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-Charge.

M&L Machine pressed precast rubber moulded concrete coloured interlocking paver block any shape and size confirming to IS 15468-2006 of 60 mm thickness with grey cement and pigment M-35 Grade 20mm graded stone aggregate) complete all as specified and directed by Engr-in-Charge.

M&L providing precast cement concrete in PCC (1:2:4) type B-1 with 20 mm graded aggregate for kerb stone and similar works with plain fair finishes including chamfers, weatherings, throat- ing etc. and setting in mortar (1:4) complete with joints to match complete all as specified and directed by Engr-in-Charge.

M & L for 75mm thick cement concrete type C-1, 1:3:6 using 20mm graged aggregate as in plinth protection complete all as specified and directed by Engr-in-Charge.

M & L for 40mm thick cement concrete type B-1, 1:2:4 using 20mm graged aggregate as in flooring , finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Demolition of brick work built in cement mortar of any description incl removing from work site to store complete all as specified and directed by Engr-in-Charge.

M&L brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by Engr-in-Charge.

Taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.

M&L 15mm thick rendering in CM 1:6 to brick/ concrete wall surfaces finished even & smooth w/o using extra cement complete all as specified and as directed by Engr-in-Charge.

M&L 15mm thick rendering in CM 1:4 to brick/ concrete wall surfaces finished even & smooth w/o using extra cement complete all as specified and as directed by Engr-in-Charge.

M&L, 5mm thick rendering in CM 1:3 on fair faces of concrete surfaces as on ceilings finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L two coats of Acrylic Emulsion distemper over one coat of wall putty on newly plastered wall surfaces including preparation of surface using roller complete all as specified and as directed by Engr-in-Charge.

M&L two coats of cement based paint over chalk whiting on newly plastered wall surfaces including preparation of surface using roller complete all as specified and as directed by Engr-in-Charge

M&L three coats of white wash to new surfaces on ceilings including preparation of surface complete all as specified and directed by Engr-in-Charge.

M&L two coat of cement base paint to old surfaces of walls including preparation of surfaces with complete all as specified and directed by Engr-in-Charge.

M&L two coats of Acrylic Emulsion Distemper over old decorated surfaces of wall after complete removal of existing treatment including preparation of surface with putty finishes complete using roller complete all as specified and as directed by Engr-in-Charge

M&L two coats of white wash to old surfaces on ceilings including preparation of surface complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4 sqm each complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames (without taking off shutters from the frame) not exceeding 1.5 sqm each complete all as specified and directed by Engr-in-Charge.

Taking down steel window / ventilators (not exc 1.5 Sqm each) complete all as specified and directed by Engr-in-Charge.

Taking down shutters of any description exc 1 Sqm but n exc 2 sqm each complete all as specified and directed by Engr-in-Charge.

Taking down shutters of any description exc 1 Sqm but n exc 2 sqm each and refixing in same opening complete all as specified and directed by Engr-in-Charge.

M&L providing cement concrete (1:3:6) type C1 for filling in pressed steel frames and other similar items etc complete all as specified and as directed by Engr-in-Charge.

S & F 30mm thick flush shutter core construction, with block board core and play wood face panels, commercial type on both side (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and as directed by Engr-in-Charge.

S & F Second class hard wood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares with plain, chamfered or rounded mitred and rebated sash bars any number & fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, section 8 clause 8.24 (a) complete all as specified and as directed by Engr-in-Charge.

S&F factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge.

S&F 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engr-in- charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified by the manufacturer and as per directions of Engineer-in-charge.

S&F Factory Made Solid PVC Moulded Door Shutter With Particle Board Co, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed by Engr-in-Charge.

S&F 100mm long butt hinges, medium weight, cold rolled stainless steel complete all as specified and directed by Engr-in-Charge.

S&F aluminium handle cast type anodised, 150mm long complete all as specified and directed by Engr-in-Charge.

S&F 300mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.

S&F aluminium anodised barrel tower bolts of extruded section 200mm long ccomplete all as specified and directed by Engr-in-Charge.

S&F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engr-in-Charge.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge.

S&F in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge.

S&F for floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140 mm anodised, with hard drawn steel spring complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick sorrounds, glazed with oil putty or fixed with beads complete all as specified and directed by Engr-in-Charge.

S&F sheet glass 4.8 mm thick ordinary quality and glazing with oil putty or glazing pins / spring clip in square, rectangle not exc 0.5 Sqm in each pan complete all as specified and directed by Engr-in-Charge.

Fixing only sheet glass any thickness ordinary quality and glazing with oil putty or glazing pins / spring clip in square or rectangular except glass panes materials complete all as specified and directed by Engr-in-Charge.

S&F steel windows with side hung shutters including hinges with steel handle and steel peg stay, complete with glazing bars, devetailed or welded including glazed and gauze shutter complete all as specified and directed by Engr-in-Charge.

S&F steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley, wheel complete all as specified and directed by Engr-in-Charge.

M&L powder coated aluminium frames for doors, windows with one or moe rebates including jointing cleats for fixing etc.including power coating minimum thickness of power coating shall be 50 micron as per the specification) complete all as specified and directed by Engr-in-Charge.

S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,powder coated aluminum snap beading screws etc. complete all as specified and directed by Engr-in-Charge.

S&F powder coated aluminium windows and ventilator shutters, side hung type, without sash bars aluminium saction weighing 0.55 kg/RM including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fitting such as peg stay 150mm long (1 no) hinges type B21 100 mm long (2 No) suitable handle (1No) and including aluminium grill complete all as specified and directed by Engr-in-Charge.

S&F 4mm sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each plane complete all as specified and directed by Engr-in-Charge.

Supply & Fix 4mm thick figured glass, pin head type and glazing with oil putty or fixed with beads in suqares n.exc 0.5 Sqm in each pane complete all as specified and directed by Engr-in-Charge.

M&L two coat of synthetic enamel paint on old painted surfaces of wood and wood based materials over 10 cm width or girth including preparation complete all as specified and directed by Engr-in-Charge.

M&L two coats of synthetic enamel paint over a coat of pink primer on new surfaces of wooden and wood based materials over 10 cm width or girth including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

M&L two coat of synthetic enamel paint on old painted surfaces of steel and iron work over 10 cm width or girth including preparation complete all as specified and directed by Engr-in-Charge.

M&L, two coats of synthetic enamel paint over a coat of red oxide on steel surface over 10 cm width or girth, not otherwise described including preparation of new surface complete all as specified and directed by Engr-in-Charge.

Suuply and fix in repairs vitreous china wash hand basin white flat back of size 550mm X 400mm, fixed with a set of cast iron brackets including cutting and pinning in ends of brackets to wall, provision of 15mm size pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter "Hot or cold'' with long scrwed shanks and fly nuts, 32mm dia brass chromium plated waste fittings 450mm long PVC connection of 15mm size with PTMT nuts and 40mm dia waste pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair Vitreous china urinal partition white of size 310x700 mm terminating about 40cm above floor line, including brass screw down with wooden or PVC cleats with white cement in corner or edges of urinal partition complete all as specified and as directed by Engr-in-Charge.

S&F in repair vitreous China urinals, full stall complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and as directed by Engr-in-Charge.

S&F in repair vitreous China wash down water closet pan (pedestal pattern), white complete, including white seat cover with hinging arrangement, (excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed by Engr-in-Charge.

Supply & Fix in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections etc complete all as specified and directed by Engr-in-Charge.

S&F in repair, 10 ltr capacity low level PVC valveless, syphonic action type flushing cistern (dual system), white, with inlet, ball valve, flush pipe, PVC connection 15 mm dia and 450 mm long float and handle including bracket complete all as specified and directed by Engr-in-Charge.

S&F in repair CP toilet paper holder with wooden/PVC cleat and brass screws complete all as specified and directed by Engr-in-Charge.

S&F in repair Soap dish of Chromium plated (CP) approx size 160x160mm, approximate size 160x160x90mm with wooden/PVC cleat and brass screws complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends Bore of pipe in 20mm, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs stop valves, cast copper alloy 15 mm bore (CP) screwed down high pressure with crutch or butter fly handle for iron pipe or for union and complete all as specified and directed by Engr-in-Charge.

Supply and fixed in repair pillar tap 15mm dia cast copper alloy with capstan heads, chromium plated screwed down high pressure with long screwed for iron pipe of 15 mm dia, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs Angle stop valves, cast copper alloy 15 mm bore screwed down high pressure with (CP) chromium plated crutch or butter fly handle for iron pipe or for union and complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15mm bib taps cast copper alloy, chromium plated fency type with crutch or butterfly handle screwed down screwed for Iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge.

S&F chromium plated hand shower health faucet ABB body with 8 mm dia. 1.00 m long CP flexiable pipe 15 mm bore with wall hook complete all as specified and directed including taking down old one complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm long complete all as specified and directed by Engr-in-Charge.

S&F PVC gratings 100 mm dia of PTMT fixed in repairs.(Minimum weight 25 gms) complete all as specified and directed by Engr-in-Charge.

S&F in repair CP shower rose 125mm size and 15mm dia with or without swivel joints any size including fixing to steel pipe or union complete all as specified and as directed by Engr-in-Charge.

S&F in repair 32mm dia PVC down take waste pipe for WHB of 75cm long as in repairs complete all as specified and directed by Engr-in-Charge.

S&F in repair CP towel rail 600mm long fixed with CP brass screws in wooden/PVC cleat complete all as specified and directed by Engr-in-Charge.

Taking up or down GI steel water tubing 15mm bore and connections including fittings from floor/walls/ ceiling complete all as specified and directed by Engr-in-Charge.

Taking up or down GI Steel water tubing 20mm bore and connections including fittings from floor/walls/ centrings complete all as specified and directed by Engr-in-Charge.

S&F Galvanised steel water tubing 15 mm bore medium grade with all fittings concealed including cutting chases to brick wall/ceiling or laying in floors and making good complete all as specified and directed by Engr-in-Charge.

Fixing only tubes, of 15mm bore any grade,(medium) to walls and ceilings or laying in floors complete all as specified and directed by Engr-in-Charge.

S & F GI steel water tubing 20mm bore medium grade with all fittings and fixed complete to walls ceiling or laid in floors complete all as specified and directed by Engr-in-Charge.

Fixing only tubes, of 20 mm bore any grade,(medium) to walls and ceilings or laying in floors complete all as specified and directed by Engr-in-Charge.

S&F in repair plastic seat cover and CP jet spray for pedestal pan including necessary fittings arrangement complete all as specified and directed by Engr-in-Charge.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed by Engr-in-Charge.

Fixing in repair only powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,powder coated aluminum snap beading screws etc. complete all as specified. complete all as specified and directed by Engr-in-Charge.

Dismantling water tanks any type exc. 250 ltr but nexc 500 ltr complete all as specified and directed by Engr-in-Charge.

Dismantling water tanks any type exc. 500 ltr but nexc 1000 ltr complete all as specified and directed by Engr-in-Charge.

S & F rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part -I (500 Ltrs) capacity and including 20mm bore PTMT ball valve, high pressure with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule (minimum weight 210gms) complete all as specified and directed by Engr-in-Charge. (Note : PVC tank Shall be ISI marked & having two layer)

S&F rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part -I (1000 Ltrs) capacity and including 20mm bore PTMT ball valve, high pressure with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule (minimum weight 210gms) complete all as specified and directed by Engr-in-Charge. (Note : PVC tank Shall be ISI marked & having two layer)

Supply and fixing in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for bore dia of pipe 20mm complete all as specified and directed by Engr-in-Charge.

Dismantling of cast iron or reinforced concrete drain pipes dia 100mm jointed in cement mortar and taking out of trenches, if required complete all as specified and directed by Engr-in-Charge.

M&L for 100mm dia cast iron sand cast waste and vent pipes in any length with or without ears with cement jointed fixed to wall complete all as specified and directed by Engr-in-Charge.

M&L for 75mm dia cast iron sand cast waste and vent pipes in any length with or without ears with cement jointed fixed to wall complete all as specified and directed by Engr-in-Charge.

M&L for 100mm dia cast iron Bends complete all as specified and directed by Engr-in-Charge.

M&L for 75mm dia cast iron Bends complete all as specified and directed by Engr-in-Charge.

Taking down eaves gutters and rain water pipes,PVC (SWR) pipes (any size or pattern ) including all fittings heads, shoes, bends, and removal to store complete all as specified and directed by Engr-in-Charge.

S&F 110 mm dia PVC (SWR) rain water pipes single socketed in any length with rubber ring joints, fixed to walls including necessary scaffolding upto the height of building from ground level complete all as specified and directed by Engr-in-Charge.

S&F 110 mm dia PVC (SWR) bend with access door complete all as specified and as directed by Engr-in-Charge.

S&F in repair Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for 100-110mm dia pipe, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed by Engr-in-Charge.

S&F in repair stainless steel curtain rod, mild steel, chromium plated 25mm dia fency type with fixing of decoreted type brackets,stops, rollers including end knobs etc complete all as specified and directed by Engr-in-Charge.

S&F in repair for door closer hydraulically regulated, alunimiun body designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed by Engr-in-Charge.

S & F in repair 15mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S & F in repair stainless steel sink with drainage board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-Charge.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160m complete all as specified and directed by Engr-in-charge.

S&F in repair 32 mm dia sink waste coupling of brass chromium plated (half or full threaded) complete all as specified and directed including taking out old one complete all as specified and directed by Engr-in-Charge.

Dismantling roof sheets (corrugated semicorrugated, Plain or corrugated sheeting, any gauge, any type thickness etc) sheet in roof covering complete all as specified and directed by Engr-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of a colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

Dismantling wall and ceiling boards (fibre, pulp, AC insulation, etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets & snap grid and any description complete all as specified and directed by Engr-in-Charge.

M&L anodised aluminium snap grid frame work for false ceiling including Gypsum Board 12mm thick in ceiling fixed with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified screw as per manufacturers instructions complete all as specified and directed by Engr-in-Charge.

M&L solid PVC wall lining consisting of 5mm thick wood grain printed pvc sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed by Engr-in-Charge.

M&L hollow section PVC wall lining consisting of 5mm thick wood grain printed pvc sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed by Engr-in-Charge.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed by Engr-in-Charge.

M&L for Second class clean sawn hard-wood Plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed in scantlings and for frame etc complete all as specified and directed by Engr-in-Charge.

Dismantling timber scantlings 40 sq. cm and over in section, in any position in framed work complete all as specified and directed by Engr-in-Charge.

S&F Prelaminated particle board,19 mm thick interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed by Engr-in-Charge.

S&F in repair for vitreous China urinals,half stall urinal (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) and including Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed by Engr-in-Charge.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed by Engr-in-Charge.

M&L for 30 cm x 30 cm x 25 mm thick chequered cement concrete tiles set jointed and pointed in neat cement slurry in floors with grey cement including 15mm thick screed in CM 1:6 with pigments complete all as specified and directed by Engr-in-Charge.

S & F in repair brass mortice lock, vertical type, size 100 mm and 4 lever type complete all as specified and directed by Engr-in-Charge.

Cleaning of PVC water storage tank of capacity exceeding 500 litres upto and including 1000 litres by taking down existing inlet and outlet pipes setting aside the tank and cleaning, rubbing down and removing all scales and dirt, mud and any other foreign materials etc from inside complete incl writing letter on PVC tank as TANK CLEANED ON ____ Dt, Month and year complete all as specified and directed by Engr-in-Charge.

S&F MS Angle for door frame as chowkhat or gates of angle or other section with gusset plates, rails bracets etc, complete drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (Exclusive of steel sheeting or other covering running rails and guides) and hanging also fasterning and fixing complete all as specified and directed by Engr-in-Charge. (Fe-410, E-250, Quality-A)

Taking down carefully aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc complete all as specified and directed by Engineer - in - Charge.

M & L for concealed conduit point wiring complete for light on independent /combine board with cable 1.5 sqmm (Nominal area) FRLSH PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , after cutting in wall chasing for conduits and sinking's for sunken cast iron/ pressed steel terminal boxes 60mm deep ,suitable length and 1. 2 mm thickness for mounting, switches, sockets,fan regulator with 3 mm thick plastic laminated sheet cover fixed with brass screwed and cup washers, duly grouting and painted with red oxide metal primer and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and direced by the Engineer in charge.

All as per Srl item No -142 here in before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No -142 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 142 here in before but for one switch socket combinationt 6 pin 5/ 15 Amps on independent board with copper conductor 2.5 Sqmm complete all as specified and directed by Engineer - in - Charge.

All as Srl item No. 142 here in before but for one light point controlled by two 2 ways switches complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 142 here in before but for call bell point complete all as specified and directed by Engineer - in - Charge.

M & L for concealed existing conduit point wiring complete for light/ fan on independent /combine board with cable 1.5 sqmm (Nominal area) FRLSH PVC insulated multistranded unsheathed copper conductor, drawn in PVC existing Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , and sinking's for new sunken cast iron/ pressed steel terminal boxes 60mm deep , switches, sockets,fan regulator with 3 mm thick plastic laminated sheet cover fixed with brass screwed and cup washers, duly grouting and painted with red oxide metal primer including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and direced by the Engineer in charge. ( Make - Anchor/Havells)

All as per Srl item no -148 here in before but for one switch socket combination 5/6 Amps on independent board complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No -148 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 148 here in before but for one socket outlet 3 pin 15 Amps on independent board with 2.5 Sqmm copper cable complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 148 here in before but for one light point controlled by two 2 ways switches complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 148 here in before but for call bell point complete all as specified and directed by Engineer - in - Charge.

S & F in replacement switch piano flush type 5/6 Amps single pole one way complete all as specified and directed by Engineer - in - Charge.

S & F in replacement switch piano flush type 5/6 Amps single pole two ways complete all as specified and directed by Engineer – in - Charge.

S&F in replacement bell push flush type 5 Amp complete all as specified and directed by Engineer – in - Charge.)

S&F in replacement Electronic bell AC 230 Volt single pole ding dong type complete all as specified and directed by Engineer - in - Charge.

S & F in replacement switch socket combination 5 pin, type 5/6 Amps flush type complete all as specified and directed by Engineer - in - Charge.

S & F in replacement switch socket combination 6 Pin, 15/16 Amps flush type complete all as specified and directed by Engineer - in - Charge.

S & F in replacement Socket outlet 5 pin 5 Amps flush type complete all as specified and directed by Engineer - in - Charge.

S & F in replacement Industrial socket metal clad plug and socket with MCBs single pole 20 Amp complete all as specified and directed by Engineer - in - Charge.

S & F in replacement modular switch 5/6 Amps single pole one way,one module complete all as specified and directed by Engineer - in - Charge.

S & F in replacement modular switch socket combination 5 pin, type 5/6 Amps5 in 1 flush type including modular cover plate with frame complete all as specified and directed by Engineer - in - Charge.

S & F in replacement modular switch socket combination 6 Pin, 5/16 Amps flush type including modular cover plate with frame complete all as specified and directed by Engineer - in - Charge.

S & F in replacement modular switch 5/6 Amps single pole two ways complete all as specified and directed by Engineer – in - Charge.

S & F in replacement modular socket outlet 5 pin 5 Amps flush type complete all as specified and directed by Engineer - in - Charge.

S&F in replacement modular bell push 5 Amp complete all as specified and directed by Engineer – in - Charge.

S & F in replacement modular stepped type, fan regulator not less than 120 watt for ceiling fan 1200/1400mm sweep complete all as specified and directed by Engineer - in - Charge

S & F repair ceiling rose surface bakelite 65 x 50 mm three terminals complete all as specified and directed by Engineer - in - Charge.

S & F in replacement of existing light fitting with LED batten with aliminium housing and integrated electronic driver, 20 watt having input voltage AC90-300V, 50 Hz , 6500K, and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connector complete all as specified and directed by Engineer - in - Charge.

S&F in replacement security light fitting LED TYPE 25 watt with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 32/40 mm bore “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer - in - Charge

S & F in replacement angle holder insulated body with back plate for conduit fittings complete all as specified and directed by Engineer - in - Charge.

S & F in replacement Water tight bulk head fitting,comprision of connector galvanised cast iron back plate,weather proof enamelled gallery ,glass well,and including 10 watt LED lamp complete all as specified and directed by Engineer - in - Charge.

S&F in replacement decorative wall light fixture made up of poly carbonate suitable for 9 watt LED lamp complete all as specified and directed by Engineer - in - Charge.

S & F in repair compact & decorative energy efficient LED mirror light fitting with antiglare diffuser and decorative end caps suitable for 1X10 watt fitting 2 ft version including LED lamp 10 watt complete all as specified and directed by Engineer - in - Charge.

S & F speed regulator for ceiling fan 1200/1400mm sweep complete all as specified and directed by Engineer - in - Charge

S&F in replacement recess mounting 2 X 2 feet 36 watt LED luminaire with powder coated CRCA housing with LEDs,seamless front frame with high transmission acrylic cover and fixed electronic driver (surge protector) complete all as specified and directed by Engineer - in - Charge.

S & F in replacement Round recess mounted LED edge lit slim downlight 12 Watt with die-cast aluminum housing finished in premium white powder coating. Efficiency 100lm/w complete all as specified and directed by Engineer - in - Charge.

Supply and fix in replacement LED flood light 80watt ,protected to IP65 with flat front toughened glass and fixed electronic driver (surge protecter) complete including fixing arrangments in ground / on pole complete all as specified and directed by Engineer - in - Charge .

Supply and fix in replacement LED highbay luminaire 80W having fin ventilation technology for better thermal management and its cutting edge LED technology seeks to various industrial applicaton complete all as specified and directed by Engineer - in - Charge .

Supply & fixing in replacement LED land scape light/bollard light 10W/9 W with 900mm height extruded aluminium cylindrical section housing IP-65 rated complete with base & log bolt grafite grey epoxy cationic powder coated all accessories all as specified. and directed by Engineer - in - Charge .

S & F in replacement LED suspension light fitting 36 W (Fixture size : (LxWxH) in 1136x54x74 mm), aluminum extruded direct-indirect light effect gives homogenous light distribution effect & enhances the visual comfort with joining kit accessories and connecting to mains cable complete all as specified and directed by Engineer - in - Charge.

S & F in replacement of sub-main wiring with two single core cables PVC insulated and un-sheathed 6 sqmm (Nominal Area) FRLSH stranded copper conductor drawn in existing PVC conduict including 6.00 Sq mm (Nominal Area) copper cable as earth continuity conductor including necessary connections, PVC flexible pipes are used in pannel board while connecting the cable complete all as specified and directed by Engineer - in - Charge. (Note : (i) PVC cable and PVC conduit shall be ISI marked, (ii) Two Runs of two single core cable, one run of earth cable & PVC Conduit shall be measured as "One Run")

S & F of sub-main wiring with two single core cables PVC insulated and un-sheathed 4 sqmm (Nominal Area) FRLSH stranded copper conductor drawn in and including steel dia 25mm “medium quality” conduit including 4.00 Sq mm (Nominal Area) copper cable as earth continuity conductor after chasing in wall and making good the disturbed surfaces and white wash or existing colour , necessary junction box and covers including necessary connections, PVC flexible pipes are used in pannel board while connecting the cable complete all as specified and directed by Engineer - in - Charge. (Note : (i) PVC cable and PVC conduit shall be ISI marked, (ii) Two Runs of two single core cable, one run of earth cable & PVC Conduit shall be measured as "One Run")

S & F of sub-main wiring with two single core cables PVC insulated and un-sheathed 2.5 sqmm (Nominal Area) FRLSH stranded copper conductor drawn in and including steel dia 25mm “medium quality” conduit including 2.5 Sq mm (Nominal Area) copper cable as earth continuity conductor after chasing in wall and making good the disturbed surfaces and white wash or existing colour , necessary junction box and covers including necessary connections, PVC flexible pipes are used in pannel board while connecting the cable complete all as specified and directed by Engineer - in - Charge. (Note : (i) PVC cable and PVC conduit shall be ISI marked, (ii) Two Runs of two single core cable, one run of earth cable & PVC Conduit shall be measured as "One Run")

S & F inreplacement sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 8 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge.

S & F in replacement sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 12 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge.

S & F inreplacement MCB ‘C'series type suitable for 240 volts, AC supply 5 to 40 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.

S & F in replacement MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps , single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.

S&F in replacement Sheet metal enclouser for doble door Vertical DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mouting VTPN 4 Way 415 Volt ISI marked 250Amps busbar stove enameled dust and vermin proof,IP:43 protection suitable for incorporation FP MCCB(V-Tech) N1 Frame upto 125A ,Isolators and including give connection with wire and cable etc complete all as specified and directedby engineer -in-charge

S&F in replacement MCCB TP&N 63 Amps with breaking capcity 16kA ,Fixed TM and 415 volts AC Supply ISI marked complete all as specified and directed by Engineer - in - Charge.

S&F in replacement MCCB TP&N 40 Amps with breaking capcity 16kA ,Fixed TM and 415 volts AC Supply ISI marked complete all as specified and directed by Engineer - in - Charge.

S&F in replacement MCCB TP&N 100 Amps with breaking capcity 16kA ,Fixed TM and 415 volts AC Supply ISI marked complete all as specified and directed by Engineer - in - Charge.

M & L for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level , connecting to GI earth lead 4 mm dia GI earth wire ,by means of bolts,nuts and washers of GI and protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 gs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm FI with fixing arrangement ,funnel, wire mesh and earth work inhard dense soil ,returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electric plate no.3 of SSR part 1 and connecting to earth test point including taking out unserviceable earthing with all acessories all as specified or indicated including testing on completion all as specified and directed by Engr -In - Charge

S & F in replacement fan capacitor 2.5 MFD dry type 440V AC complete all as specified and directed by engineer-in-charge.

S & F in replacement fan capacitor 4 MFD dry type 440V AC complete all as specified and directed by engineer-in-charge.

Note :(i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

PAREEK AND COMPANY (BID ID -3081243)