Strengthening work from Km-1 to 6(850) of National Highway-734 (Moradabad-Thakurdwara district

Amount

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 including all labour, material, T&P etc complete but excluding GST.

Providing and applying tack coat with bitumen VG-10 using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom. including all labour, material, T&P etc complete but excluding GST.

Dense Graded Bituminous Macadam Grading I Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause No. 505 complete in all respects. including all labour, material, T&P etc complete but excluding GST.

Bituminous Concrete Grading 2 Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects including all labour, material, T&P etc complete but excluding GST.

Providing and applying white cement based putty on new surface with approved quality material of Berger JK Birla or similar Make two coats Page no 42 item no 11 including all labour, material, T&P etc complete but excluding GST.

Painting First cost over priming coat on wood or steel and other metal surface with superior synthetic enamel paint of standard make brushing to gie an even shade and finished and including cleaning the surface all dirt dust and otehr foreign matter sand preparing and stripping including cost matter and scoured with wire brushes fine steel/wood scrapppers sand prapering and knotthing including cost of all and supply of all material labour and T&P etc required for proper completion of work. S.I. No. New item no. 1(a)+2+3(II) including all labour, material, T&P etc complete but excluding GST.

A K ENGINEERING WORKS (BID ID -4867628)

M/S M A DEVELOPERS AND ENGINEERS (BID ID -4861556)