Construction of Sports Complex Hall at Uppal Bhagayath (V), Uppal(M), Medchal-Malkajgiri Dist.

Earth work excavation and depositing on bank (manual means) with initial lead of 10m and initial lift of 3m in Loamy & Clayey Soils like BC Soils, Red Earth & Ordinary Gravelly Soils ( SS 20-B) including all operational incidental labour charges such as shoring, strutting, sheeting, planking and dewatering including cost of hire charges of T & P, labour charges etc., complete for finished item of work excluding seignerage charges and dewatering charges etc., complete for Foundation of Building.(APSS No. 308) BLD-CSTN-2-1 [16]

Excavation for foundations in hard rock (blasting prohibited) with rock breakers including breaking rock, and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. including Contractors profit and Overhead charges but excluding Seignorage charges. complete for finished item of work and as directed by the Engineer-in-charge.

Carting of excavated earth with a lead of about 5 KM including cost and conveyance of all materials and all labour charges, contractors profit and overhead charges, complete for finished item of work.

Providing Antitermite treatment as per IS 6315 (Part - 2) 2001 (Pre-constructional chemical treatment measures) along the internal & external vertical faces of the columns, plinth beams, basement and top surface of the basement filling below flooring bed as per the specified procedure conforming to IS 6315 (Part-2) 2001 and other relevant approved specification duly using Chlorpyriphos/ Lindane emulsifiable concentrate 20% with 1% concentration @ 7.5 Liters/ sqm of the vertical surface & @ 5.0 Liters/ sqm of the horizontal surface of the substructure to a depth of 500 mm around columns & 300 mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc & cost & conveyance of all materials to the site, cost of labour for spraying, rodding etc complete ,all taxes except GST including Contractors profit and Overhead charges but excluding Seignorage charges. complete for finished item of work and as directed by the Engineer-in-charge.

Providing Plain cement concrete 1:4:8 using 40 mm metal with concrete mixer upto plinth level minimum quantty of cement is 162 kg per cum as approved by the department including cost and conveyance of all materials to site, machine mixing of concrete, all lifts, leads, delifts, centering, laying in position, vibrating, compacting, curing, removal of centering, all labour charges, tools and plants, and all other incidental and operational charges etc., complete as per specifications, drawings and including Contractors profit and Overhead charges but excluding Seignorage charges. complete for finished item of work and as directed by the Engineer-in-charge.

Supply and filling with Stone crusher Dust finer than 3mm with not more than 10% passing 0.075 sieve ( taken as 2.36 mm and below HBG stone chips) Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc.,including Contractors profit and Overhead charges but excluding Seignorage charges. complete for finished item of work and as directed by the Engineer-in-charge.. (as per SSR 11-12- Amendment A(2),Pg.No.387) BLD-CSTN-2-8 [18]

(BLD-CSTN 2-8) - Reffling with usefull available excavated earth / soils in trenches ,sides of foundations & basement and the pipeline trenches after laid, jointed, executed, tested with intial lead in layors not exceeding 15 cm thick , consolidating each deposited layer by watering consolidting each layer by watering and ramming including cost and conveyonce of water to work site and all operational ,incidental,labour charges,hire charges of T&P .,including lead and lift charges, Contractors profit and Overhead charges but excluding Seignorage charges. complete for finished item of work and as directed by the Engineer-in-charge..(APSS No.309&310)

Supply and filling with gravel as per specification and drawing including cost and conveyance of materials to site with all leads, lifts including ramming, labour charges, all other incidental and operational charges etc., complete as per detailed specification and including Contractors profit and Overhead charges but excluding Seignorage charges. complete for finished item of work and as directed by the Engineer-in-charge. (as per SSR 11-12- Amendment A(2),Pg.No.387) BLD-CSTN-2-8 [18]

Construction of RR Masonry in CM (1:6) prop., using granite stone with minimum cement content 79.2 kg per cum including cost and covenyance of all materials to site, labour charges, curing, all leads, lifts and all other incidental and operational charges etc.,including Contractors profit and Overhead charges but excluding Seignorage charges. complete for finished item of work and as directed by the Engineer-in-charge.. (BLD-CSTN 6-12)

Supply and placing of the M25 Grade Design Mix Concrete corresponding to IS 456 using BATCHING PLANT with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry with minimum cement content 380 kg per cum including cost and conveyance of all materials like cement, fine aggregate (fine sand(unscreened)) coarse aggregate, water etc., to site, including all operational, incidental and labour charges such as laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing etc. including Contractors profit and Overhead charges but excluding Seignorage charges. complete for finished item of work and as directed by the Engineer-in-charge. FOR FOUNDATIONS, PLINTH, PEDESTALS (Below Plinth) (BLD-CSTN 3-17) For foundation

Supply and placing of the M25 Grade Design Mix Concrete corresponding to IS 456 using BATCHING PLANT with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry with minimum cement content 380 kg per cum including cost and conveyance of all materials like cement, fine aggregate (fine sand(unscreened)) coarse aggregate, water etc., to site, including all operational, incidental and labour charges such as laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing etc. including Contractors profit and Overhead charges but excluding Seignorage charges. complete for finished item of work and as directed by the Engineer-in-charge. FOR FOUNDATIONS, PLINTH, PEDESTALS (Below Plinth) (BLD-CSTN 3-17) For Pedastal

Supply and placing of the M25 Grade Design Mix Concrete corresponding to IS 456 using BATCHING PLANT with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry with minimum cement content 380 kg per cum including cost and conveyance of all materials like cement, fine aggregate (fine sand(unscreened)) coarse aggregate, water etc., to site, including all operational, incidental and labour charges such as laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing etc. including Contractors profit and Overhead charges but excluding Seignorage charges. complete for finished item of work and as directed by the Engineer-in-charge. FOR FOUNDATIONS, PLINTH, PEDESTALS (Below Plinth) (BLD-CSTN 3-17) For Plinth Beam

Supply and placing of the M25 Grade Design Mix Concrete corresponding to IS 456 using BATCHING PLANT with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry with minimum cement content 380 kg per cum including cost and conveyance of all materials like cement, fine aggregate (fine sand(unscreened)) coarse aggregate, water etc., to site, including all operational, incidental and labour charges such as laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing etc. including Contractors profit and Overhead charges but excluding Seignorage charges. complete for finished item of work and as directed by the Engineer-in-charge. for Columns, Lintels, Water Tanks, RCC Walls BLD-CSTN3-18 for Lintels

Providing High Yield strength deformed (HYSD) / Thermo mechanically treated (TMT), Mild steel (MS) Steel bars (Fe 415/Fe500 grade as per IS 1786-1985) of different diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., including Contractors profit and Overhead charges complete for finished item of work and as directed by the Engineer-in-charge. (APSS No.126) in all floors.

Construction of Brick Masonary in CM (1:6) prop., using traditional Bricks of Class as per Table 1 of IS 1077-1992 of size 23 X 11 X 7 including cost and conveyance of all materials to site, tools and plants, scaffolding charges, all leads and lifts, curing, all labour charges, all other incidental and operational charges etc., including Contractors profit and Overhead charges but excluding Seignorage charges. complete for finished item of work and as directed by the Engineer-in-charge.. (BLD-CSTN 5-4)

Plastering with 20 mm thick in two coats in CM (1:6) 16mm thick and top coat in CM(1:4) 4mm thick with dubara sponge finishing including cost and conveyance of all materials like cement, finesand(screened), water, etc., to site,and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc. including lead and lift charges, Contractors profit and Overhead charges but excluding Seignorage charges. complete for finished item of work and as directed by the Engineer-in-charge.

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, fine sand (screened), water, etc., to site, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc. including Contractors profit and Overhead charges but excluding Seignorage charges. complete for finished item of work and as directed by the Engineer-in-charge BLD-CSTN8-10.,

Flooring with high polished granite slabs other than black set over base coat of cement mortar (1:8) 20mm thick over CC bed already laid or RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost of all materials like cement, sand, and water and flooring stones etc., complete, including labour charges for dressing of flooring stones etc., including Contractors profit and Overhead charges but excluding Seignorage charges. complete for finished item of work and as directed by the Engineer-in-charge, BLD-CSTN9-7 for ground floor

Flooring with high polished granite slabs other than black set over base coat of cement mortar (1:8) 20mm thick over CC bed already laid or RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost of all materials like cement, sand, and water and flooring stones etc., complete, including labour charges for dressing of flooring stones etc., including Contractors profit and Overhead charges but excluding Seignorage charges. complete for finished item of work and as directed by the Engineer-in-charge., BLD-CSTN9-7 for first floor

Providing flooring of steps risers of steps with 18mm thick mirror polished granite length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Shahabad stone, cement, sand and water etc., , but excluding the cost of conveyance of all materials including Contractors profit and Overhead charges but excluding Seignorage charges. complete for finished item of work and as directed by the Engineer-in-charge. (BLD-CSTN-9-21)

Providing flooring (Treads) of steps with 18 mm thick mirror polished granite length equal to flooring stones, set over base coat of CM (1:6) 12 mm thick over cc bed already laid with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work

Providing and Fixing Structural Glazing fabricated from Roll formed sections made of Pre-painted Steel / Powder coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 Gm/Sqm) with total coated thickness of 0.72mm. The glass holding section made of 304 grade stainless steel of 0.6mm thick as per the design requirement & calculations as given in IS: 875. Primer coat with epoxy primer of 5 – 7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The vertical section should be of 50mm x100mm x 0.72mm, 33mm x 58mm x 0.72mm for frame horizontal section, stiffener section should be 48mm x 98mm x 1mm, cover profiles sections should be of 20mm x 58mm x 0.58mm, Glass holding section should be of 37mm x 37mm & 37mm x 18mm. Including 5mm thick Ocean Blue reflective glass. Brackets made of CRCA powder coated/Electroplated should be used to connect vertical to horizontal, vertical to slab, to fix verticals at top & bottom as per site requirement. Gasket made of Ethyl Propylene Diamine Monomer. Natural cure, with Good U.V. Resistance Silicon to be used. Wall fixing of sections to concrete/masonry wall should be with self-expanding cap & screws. The rate is inclusive of cost and conveyance of all materials to site, all labour charges, incidental charges, cost of all consumables etc. and scaffolding charges, form work , overheads & contractors profit etc., complete for finished item of work in all floors.

Supplying, fabricating & fixing of structural steel works like columns, beams and base plates including Labour charges for fabricating, cost of welding rods, power charges, including cost of fixing in position including cost and conveyance of all materials, labour charges for fabrication & erection at site work for all heights etc., as per the drawings supplied from time to time at every level including contractors profit and overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.

Supply of Galvanized Roofing Deck sheets with 0.80mm -2mm thickness, Coating: Zinc coating Z125 / Z275/ Z 500 GSM. Yield Strength: E250. crest to crest width 130 mm length 12 metres : profile width 982mm and profile depth 44mm CR steel as per IS-513 HR steel as per IS 1079 and Galvanised Steel as per IS 277 including Contractor’s profit and Overhead charges etc., Complete for finished item of work and as directed by the Engineer-In-Charge

Supply of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours including contractor's profit and overhead charges etc. Complete for finished item of work and as directed by the Engineer-in-charge.

Supply and placing of the M25 Grade Design Mix Concrete corresponding to IS 456 using BATCHING PLANT with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (fine sand(unscreened)) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as , laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing etc. including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge. (For ROOF BEAMS, SLAB AND CHAJJAS) for 1st floor

Supply and placing of the M25 Grade Design Mix Concrete corresponding to IS 456 using BATCHING PLANT with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (fine sand(unscreened)) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as , laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing etc.including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.. (For ROOF BEAMS, SLAB AND CHAJJAS) for 2nd floor

Painting to new walls with two coats of plastic emulsion paint of approved brand and shade over primary coat of cement primer interior grade I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge. as per SS911

Providing and applying Wall putty of White Cement or Polymer or Cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, over heads and contractors profit etc.,including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge. in all floors for Internal walls And External

Providing skirting to internal walls to 15 cm height with vitrified tiles of thickness between 8 to 10mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Parts 1 to 15) of any colour and finish in all shades and designs, length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge..(BLD-CSTN 9-20)

Supplying and Installation of Sports Flooring system of overall 80 mm thick (a+b+c) of which the top layer is of thickness (a) 22 mm and 53 to 92 mm wide reapers of varying length in tongue and groove shape, the edges of the boards with finger lock groove and the bottom side with air pass groove using natural 100% hardwood board drawn and sawn from one piece of solid wood Maple, Teak wood, Oak, etc., the under frame- made of pine wood runners of (b) 38 mm x 70 mm, treated with antitermite solution and fixed on the bottom side with (c) 20mm thick EPDM air cushioned pads, stapled through the two wings at 350 m x 350 mm c/c, including laying HDPE Plain Black Polythene Sheet, Tarpaulin Grade: GSM 150, Thickness: 100 Microns Sheeting on existing IPS / RCC subfloor treated with a vapor barrier to be placed on the leveled IPS / RCC sub floor before laying the under frame, the runners having air cushion pads to be placed on the vapor barrier in perfect level at 350mm in 1 direction, the surface board to be screwed to the runner through the tongue only and will lock the screwed tongue by the groove of adjoining board, ends of the boards to be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive, an expansion of 12 to 15 mm to be left open between the wooden flooring and the surrounding tiled area / walls, duly finishing with machine sanded in uniform level and finishing with P.U. POLISHING water based polyurethane lacquer, etc, including game line marking to be carried out in required colors before applying the finishing coat,including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.

Supply and installation of ITF certified 8 layers acrylic system with thickness upto 2mm. The flooring should be certified by International Tennis Federation (ITF) and should have application as first layer of primer (% 100 acrylic latex based emulsion to improve bond of acrylic court system to the asphalt surface having consumption ratio of 0.014kg/sqft), second layer of acrylic Resurfacer (Filling and smoothing asphalt or concrete surfaces in preparation for Acryflex T tennis court system. And also fills the surface chips, voids and conceals repairs while providing a smooth surface for color coating. It should have a consumption ratio of 0.046kg/sqft), third and fourth layer of Precoat (Quartz filled % 100 acrylic latex based textured tennis coat with total consumption ratio of 0.078 kg/sqft) and Fifth layer of Topcoat (100% acrylic latex polymer & colour coat for the finished surface to protect from UV. It should have consumption ration of 0.023 kg/sft). On top of these 5 layers, the line marking should be done with Overline paint (100% acrylic latex based high hiding line paints. It should have consumption ratio of 4 kg/court). The acrylic resurfacer must have silica sand infill to be embedded into it with consumption ratio of 0.065 kg/sqft. The product must be approved/licensed/preferred by the respective International Sports Federation & used at the Indian/International Championships recognized by the respective Regional /International Sports Federation including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.

EPDM Rubber Flooring: Providing & Laying of EPDM (Ethylene Propylene Diene Monomer) Safety & Sports total 25MM [ 19 MM SBR & 6 MM EPDM ] thick Rubber flooring systems comprising two layers with the top layer of 6mm being high-quality EPDM granules and the bottom layer is 19 mm SBR There are two types of pigments used in our EPDM which are organic and inorganic. Inorganic pigments are used to manufacture Class 1 colors which are more stable. The granules shall be mixed on-site with specially developed binders and trowelled by hand to specified thickness creating a seamless surface. The flooring system shall be hygienic, durable with high elasticity, all-weather, resilient, nonslip, high impact, and easy maintenance EPDM. The performance requirements and test methods for an impact-absorbing playground surfacing shall comply with SS 495:2001 or ASTM Standards including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.

Flooring with Virtrified tiles(of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of 1st quality set over base coat of cement mortar 1:8, 12 mm thick over CC bed already laid including nead treatment of slurry of honey like consistency spread @ 3.3 kg per sqm & past jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand, water and tiles etc., including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.. [51]

Construction of CRS masonry in CM (1:6) prop., using granite stone including cost and covenyance of all materials to site, labour charges, curing, all leads, lifts and all other incidental and operational charges etc., including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.(BLD-CSTN 6-6)

Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65mm and ISI marked Moulded panel solid core flush doors using water-resistant hardwood fibre HDF / MDF fibre boards skins of 2.5 mm thick of Masonite or equivalent doors of 30mm thick single shutter with internal lipping on all sides including cost and conveyance to site of medium teak wood door frame, flush shutter, including suply and fixing 6 Nos. MS Z hold fasts of size 300mm x 40mm x 5mm including ISI marked Stainless steel fixtures 3 Nos. butt hinges (IS:12817) of 150mm long, 1 No. aldrop (IS:15834) 250 mm long, 1 No. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long , 2 Nos. 125mm long handles ,1 No. rubber bush including supplying and fixing 1.20mm thick PVC sheet to full height of the shutter inside including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002. (The vertical frame of door shall be embedded in flooring for deth of not less than 10mm) ( 900mm x 2100mm ) including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.

Supply of Precast Concrete blocks for paving of M-35 grade and thickness not less than 60 mm for Light traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's Specification to the site including all operational, Incidental and labour charges for loading & unloading, laying to desired lines and levels etc., including Overheads and Contractor's Profit complete for finished item of work and as directed by the Engineer in charge.

Providing of 6.5 inch borewell drilling including all operational, incidental and labour charges, conveyance of machinery to site, including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge. a)Depth 0-100 Rft

Providing of 6.5 inch borewell drilling including all operational, incidental and labour charges, conveyance of machinery to site, including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge. b) Depth 100-200 Rft

Providing of 6.5 inch borewell drilling including all operational, incidental and labour charges, conveyance of machinery to site, including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge. c) Depth 200-300 Rft

Providing of 6.5 inch borewell drilling including all operational, incidental and labour charges, conveyance of machinery to site, including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge. d) Depth 300-400 Rft

Providing of 6.5 inch borewell drilling including all operational, incidental and labour charges, conveyance of machinery to site, including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge. e)Depth 400-500 Rft.

Providing of 6.5 inch borewell drilling including all operational, incidental and labour charges, conveyance of machinery to site, including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge. f) Depth 500-600 Rft

Providing of 6.5 inch borewell drilling including all operational, incidental and labour charges, conveyance of machinery to site, including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge. g) Depth 600-700 Rft

Providing of 6.5 inch borewell drilling including all operational, incidental and labour charges, conveyance of machinery to site, including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge. h) Depth 700-800 Rft

Providing of 6.5 inch borewell drilling including all operational, incidental and labour charges, conveyance of machinery to site, including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge. i) Depth 800-900 Rft

Providing of 6.5 inch borewell drilling including all operational, incidental and labour charges, conveyance of machinery to site, including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge. j) Depth 900-1000 Rft

Supply and Transportation of control panel for three phase submersible motors up to 5 HP @ 415V 50Hz operating fitted with supply and fixing of Direct - on - Line LTLK (L&T) /BCH/ SIEMENS / CROMPTON make, 0-500V Voltmeter and 0-30A Ammeter, Indication lamps, selector switches, CTS, 32A TP MCB, Single phase preventor,suitable contactor to with stand low voltage pick up and high voltage resistant, with ISI marked capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.

Supply and Transportation of star-rated 5.00 HP 12-16 StageThree phase ISI submersiblem motor pump set suitable for a 6" Bore well including cost and conveyance of all materials to the site, all Operational, Incidental and Labour Charges for erection and fixing etc., including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge. Makes: Texmo / CRI / KSB / Aryenvarsha / Lubi / Falcon

Supply and fixing in place 250 mm dia PVC casing (sudhakar make, 6 Kgs/cm2) including cost and conveyance of all materials to the site, all Operational, Incidental and Labour Charges etc., including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.

Supply and fixing in place 180 mm dia PVC casing (sudhakar make, 6 Kgs/cm2) including cost and conveyance of all materials to the site, all Operational, Incidental and Labour Charges etc., including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.

Supply and fixing in place 40 mm dia HDPE (PE-100 grade) 16.00 kg/sqcm (SDR 9) pipe including cost and conveyance of all materials to the site, all Operational, Incidental and Labour Charges etc., including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.

Supply of 3 Core 4 Sqmm Flat Copper cable of ISI for Submersible Motors including cost and conveyance of all materials to the site, all Operational, Incidental and Labour Charges etc., including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.Makes : Finolex / RR Kabel / Havells / KEI / LK (L&T) / Pawancab

Providing specialized polysulphide sealant treatment to the expansion joints (Size : 25 mm x 25 mm) duly a]. Chipping and removing of existing covering on expansion joints b]. Cleaning of the surface from dirt, dust and other contaminations c].Application of one coat of - High performance specially designed SBR latex polymer based bonding agent d]. Providing and application of Acrylic Polymer modified reinstatement concrete /mortar to the damaged edges of joint and making the groove. e]. Providing and fixing of masking tape on top of the joint both sides f]. Providing and fixing of Back p support material of PVC Solid Backer rod o leave the depth of 25 mm on the joint g]. roviding and application of one coat of olysulphide primer on inner edges of Joint. ]. Providing and application of Two part olysulphide sealant to a width of 25 mm and epth of 25 mm with putty knife and neat inish i]. Removing of masking tape and roviding and application of two coats of crylic elastomeric cementitious coating including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.

Supply and Fixing of 20mm dia 1.5mm thick surface P.V.C. pipe (ISI MARK) with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains. including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.

Supply and Fixing of 25mm dia 2mm thick PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.

Supply of 50mm PVC Junction Boxes Normal. Makes : Sudhakar / Finolex / Modi / VIP / Precision / Million / Goldmedal / GM/ DEC / Beljin

Supply of 50mm dia Heavy Grade PVC Bends. Makes : Sudhakar / Finolex / Modi / VIP / Precision / Million / Goldmedal / GM / DEC / Beljin

Supply of 2/4/6/8/12 MOD Modular Cover Frame. well Blenge Plus / Crabtree Murano / Logus Platina / Gold Medal GIFA / GM-Zenova / LK Englaze / Million M-Vee for 2 MOD

Supply of 2/4/6/8/12 MOD Modular Cover Frame. well Blenge Plus / Crabtree Murano / Logus Platina / Gold Medal GIFA / GM-Zenova / LK Englaze / Million M-Vee for 4MOD

Supply of 2/4/6/8/12 MOD Modular Cover Frame. well Blenge Plus / Crabtree Murano / Logus Platina / Gold Medal GIFA / GM-Zenova / LK Englaze / Million M-Vee for 6 MOD

Supply of 2/4/6/8/12 MOD Modular Cover Frame. well Blenge Plus / Crabtree Murano / Logus Platina / Gold Medal GIFA / GM-Zenova / LK Englaze / Million M-Vee for .8 MOD

Supply of 2/4/6/8/12 MOD Modular Cover Frame. well Blenge Plus / Crabtree Murano / Logus Platina / Gold Medal GIFA / GM-Zenova / LK Englaze / Million M-Vee for 12 MOD

Supply of PVC / XLPE Insulated Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade upto 1100 Volts as per IS: 694:2010 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard / Finecab / SPM / Gemini / Unistar / Windsor / Payal / Fortune Arrt / Avocab / Pawancab / Nakoda / HPL for 1.5 Sqmm 2 Core

Supply of PVC / XLPE Insulated Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade upto 1100 Volts as per IS: 694:2010 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard / Finecab / SPM / Gemini / Unistar / Windsor / Payal / Fortune Arrt / Avocab / Pawancab / Nakoda / HPL for 1.5 Sqmm 4 Core

Supply of PVC / XLPE Insulated Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade upto 1100 Volts as per IS: 694:2010 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard / Finecab / SPM / Gemini / Unistar / Windsor / Payal / Fortune Arrt / Avocab / Pawancab / Nakoda / HPL for 2.5 Sqmm 4 Core

Supply of PVC / XLPE Insulated Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade upto 1100 Volts as per IS: 694:2010 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard / Finecab / SPM / Gemini / Unistar / Windsor / Payal / Fortune Arrt / Avocab / Pawancab / Nakoda / HPL for 4.0 Sqmm 4 Core

Supply of ------------------------------------ -- Makes : GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega / HPL / Vimal / CPL. For 6A 3/2 pin flush type Socket with shutter.

Supply of ------------------------------------ -- Makes : GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega / HPL / Vimal / CPL. For 6Stepped type Electronic Regulator.

Supply of ------------------------------------ -- Makes : GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega / HPL / Vimal / CPL. For 6 / 10A 3 Pin 2 Module Modular Socket with shutter.

Supply of 16" (400mm) BLDC 30 W Wall mounted Fan with service value 2.7 CMM / Watt with all accessories etc., Makes : Atomberg / Crompton / Orient / Havells / Halonix / Goldmedal / GM.

Supply of 24" (600mm)Wall mounting / Pedestal Air Circulators Makes : Crompton / Havells Turbo Force / Orient / Almonard / Panasonic / Halonix / Goldmedal / GM.

Supply and installation of SPD Tested as per IEC 61643 Part 11:2011 with following specification: specification : Type 2 Nominal voltage- 240 V, MCOV - 300 V , Nominal Discharge Current (L-N/N-PE) - 20 kA (8/20μ sec) Max Discharge current (L-N/N-PE) - 50 kA (8/20μ sec), Impulse Discharge current (L-N) - 50 kA (10/350μ sec) Voltage Protection Level, Up < 1.5 kV, Response time (L-N) : < 25 ns TOV withstand 5 sec (L-N) : 337 V, TOV withstand 200 ms (N-PE) : 442 V, Short Circuit Current Rating (L-N) - 25 kA, Back-up Fuse Rating - 315 A gG Makes : CAPE / OBO Application: 3 Phase distributions Boards

Supply and Transportation of of INVERTER Model Cool type split AC unit with high wall mounted Single Split 100% copper indoor and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3.0 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord (Voltage range 160- 264 volts) and cordless remote control with with warranty of compressor for 5 years iand comprehensive maintenance for 2 years. 2.0 / 1.8 TR 5 Star capable of delivering 21600 BTU/hr and above with operating on refrigerant R-32 / R- 410 Makes : Daikin / Toshibha / Carrier / Blue Star / Hitachi / LG / Samsung / Lloyd or equivalent - ELEC-6.1.1 (d)

SITC of 100W LED Flood Light luminaire made of pressure die-cast aluminium housing with powder-coated finish, surface-mounted type, having protection grade IP-65, complete with polycarbonate lens diffuser, operating on 110–220V AC supply with power factor ≥0.9, internal surge protection of minimum 4 kV and external surge protection as required, CCT 4000K, CRI ≥80, LED life of minimum 50,000 burning hours at L70, including all accessories, mounting brackets, labour, transportation, testing and commissioning at site, complete as directed by the Engineer-in-Charge. Approved make: Alwa / Range Lite / Futura or equivalent.

SITC of 20W recessed LED luminaire made of pressure die-cast aluminium housing with powder-coated finish, recessed mounting type, having protection grade IP-20, complete with lens diffuser, operating on 110–220V AC supply with power factor ≥0.9, internal surge protection of minimum 4 kV with external surge protection as required, CCT 4000K, CRI ≥80, LED life of minimum 50,000 burning hours at L70, including all accessories, fixing arrangements, labour, transportation, testing and commissioning at site, complete as directed by the Engineer-in-Charge. Make: Alwa / Range Lite / Futura or equivalent.

SITC of 15W recessed LED luminaire made of pressure die-cast aluminium housing with powder-coated finish, recessed mounting type, having protection grade IP-20, complete with lens diffuser, operating on 110–220V AC supply with power factor ≥0.9, internal surge protection of minimum 4 kV with external surge protection as required, CCT 4000K, CRI ≥80, LED life of minimum 50,000 burning hours at L70, including all accessories, fixing arrangements, labour, transportation, testing and commissioning at site, complete as directed by the Engineer-in-Charge. Make: Alwa / Range Lite / Futura or equivalent.

Supply, Transportation, Installation, Testing and Commissioning of 24 HP Variable refrigerant Volume (VRV) / variable refrigerant flow (VRF) Air Cooled Outdoor Units (ODU) suitable for cooling and heating having 100% thermetically sealed inverter type compressor and minimum 2 compressors along with 2 condensing fans above 14 / 18 HP Modules, Microprocessor based controller, Side / Top Discharge type condensing units with R-410 A refrigerant, vibration isolators with suitable foundation etc., complete as required. The outdoor unit shall deliver the rated capacity at AHRI conditions and work even at 50 °centigrade ambient temperature without tripping. The unit shall be suitable to work on 430 V +/- 10%, 3 phase 50 Hz AC Power supply etc., complete finished item of work including comprehensive maintenance of units during the defect liability period. Makes: Blue star / Hitachi / Daikin/ Mitsubishi Electric or equivalent models approved by the Engineer-in-Charge.

Supply of 16.00 TR High Static ductable Units (78 pascal or above external static pressure) VRV/ VRF ceiling mounted ductable type indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan / dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pipe, prain pump, other necessay supports etc., suitable for operation on single phase AC supply 230V +/- 10% , 50Hz complete as required. Makes: Blue star / Hitachi / Daikin/ Mitsubishi/ LG/ Voltas or equivalent models approved by the Engineer-in- Charge. The unit shall have automatic force shutdown valve in case of fire on receiving signal from BMS system. The cooling capacity of indoor unit will be at air inlet conditions of 27°C DB and 19°C WB temperature. All as per pre approved by Engineer-In-Charge.

S&F premium make CPVC Pipes of 15.90mm OD Pipe - SDR 13.5 including the cost of pipe, required number of connectors such as elbows, tees, couplers, connectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational,incidental , labour charges, etc including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.

S&F premium make CPVC Pipes of 22.20mm OD Pipe - SDR 13.5 including the cost of pipe, required number of connectors such as elbows, tees, couplers, connectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational,incidental , labour charges, etc. including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.

S&F premium make CPVC Pipes of 28.60mm OD Pipe - SDR 13.5 including the cost of pipe, required number of connectors such as elbows, tees, couplers, connectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational,incidental , labour charges, etc including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.

Supplying and fixing of SWR PVC pipes of 4 Kg/Sq.cm. and fixing all specials such as plain bends, off sets, door bends, single junctions, double junctions etc., as per site requirement, fixing with PVC clamps with required number of Bombay nails etc., with solvent jointing as per standard practice including cost and conveyance of all materials to site, all operational, incidental, labour charges, overheads & contractors profit etc., including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge. at all floor levels . (APSS No. 1302 1319 & 1326) - for 75mm Dia

Supplying and fixing of SWR PVC pipes of 4 Kg/Sq.cm. and fixing all specials such as plain bends, off sets, door bends, single junctions, double junctions etc., as per site requirement, fixing with PVC clamps with required number of Bombay nails etc., with solvent jointing as per standard practice including cost and conveyance of all materials to site, all operational, incidental, labour charges, including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.at all floor levels . (APSS No. 1302 1319 & 1326) - for 110mm Dia

Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge. as per Standard specification.

TBSP-C.II-30: Supplying & fixing CI floor traps 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practice for nominal dia 75 mm (3") and grating size 100 mm dia of weight not less than 4.0 Kgs including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.

S&F of 15 mm brass body CP finish pillar tap of not less than 500 grams weight quarter turn spindle conforming to IS 8931 including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.

S&F of 15 mm central hole Chromium plated finish brass body single lever basin mixer 450 mm long breaded pipe for hot & cold water mixing conforming to IS 8931 and with 10 years warranty including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.

Supply, Installation and commissioning approved make wash down wall mounted EWC conforming to IS:2556 (Part 16)-2002 with 'P' or 'S' trap with concealed flush cistern fixed in wall with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap all of approved make etc. including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.in all respects: Special Coloured Grade-III

Supplying & fixing 150 mm x 100 mm SWG gully traps conforming to ISI 651 & 4127 with C.I Grating & Cost. Brick masonry in CM 1:6 prop. Intermediate chamber and fitted with 304.8 mm x 288.6mm (12"x9") C.I Frame and hinged cover including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.

Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader fixed with screws complete Indian make : 590 x 375 x 390 mm including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.

Supplying & Fixing ultra slim concealed flushing cistern of HDPE body and of size 460 x 450 x 80 mm with internal component for wall mounted Wash including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.

Supplying and Fixing best Indian make plastic softclosing seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.

Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457 .2 mm best quality glass mirror with approved make 1st quality including cost and conveyance of all materials to site, all operational, incidental, labour charges etc. including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge. in all floors.

S & F 19.04 mm dia & 609.6 mm long aluminium anodized towel rod with brackets and aluminium screws, including cost and conveyance of all materials to site, all operational,incidental , labour charges, including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge..

Providing & Placing on RCC Slab polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks, including cost and conveyance of all materials to site, all operational,incidental , labour charges, including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.

S&F of Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m long tube and wall hook with 10 years warranty, including cost and conveyance of all materials to site, all operational,incidental , labour charges, including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.

Supply and fixing of Cement Bonded Prelaminated Particle Board aluminium glazed partitions using 10MM Cement Bonded Prelaminated Particle Board and 5.00 mm thick plain glass to full height. Using with Cement Bonded Prelaminated Particle Board to a height of 0.91 meter at bottom panel and remaining height with glass and aluminium sections anodized to 12 to 15 microns and of sections of size 37mm x 62mm and 1.5mm thickness with one meter centre to centre duly fixed with clip beading on both sides including fixing the frame to pillars by M.S. flats, bolts and nuts including cost and conveyance of all materials etc., including Contractors profit and Overhead charges . complete for finished item of work and as directed by the Engineer-in-charge.