SPL REPAIR OF BATHROOM AND TOILET OF OTM ACCN BLDG NO T103 T106 T107 AT 3 EME CENTRE AND SPL REPAIR TO CHAIN LINKED FENCING NEAR BLDG NO P51 AT MDC BHOPAL UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Taking down cement plaster on brick or concrete surfaces including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Demolition of brick work, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with fly ash bricks (modular size bricks), straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brick work with fly ash bricks (modular size bricks) straight or curved on plan any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on brick or concrete surfaces including finishing the surfaces fair and even (without using extra cement) complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on brick or concrete surfaces including finishing the surfaces fair and even (without using extra cement) complete all as specified and directed.

S&F of 3 mm thick, figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in pane complete all as specified and directed.

Demolition of cement concrete in ground floor, (unreinforced) paving n.exc 15 cm thick (below or above ground level) including tiling if any complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6, type C2, (using 40 mm graded stone aggregate) in plinth protection, aprons, hard standing, path and like including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling, sub base and mass concrete complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for granite, 18-20 mm thick, (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, counter, shelves and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for coloured, glazed ceramic tiles of size 450mmX600mmX7-8mm thick in vertical surface, set and jointed over and including 10 mm thick rendering even and rough in CM 1:4 for backing of tiles, jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed.

M&L for non skid ceramic, coloured tiles 7mm to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 Sqm, but not exceeding 0.18 Sqm, in floors over 15mm thick screed bed layer in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of cement based putty complete all as specified and directed. Note: Putty shall be measured and paid for seperately.

M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of exterior acrylic emulsion paint, white or tinted over and including a coat of exterior wall primer on plastered surfaces complete all as specified and directed.

S&F in repairs PVC low level, flushing cistern, 10 ltrs capacity with all internal fittings including 32mm dia flush pipe and fixing to supply pipe including PVC connection 600 mm long 15 mm bore with brass heads and washers with connections fixed in repairs complete all as specified and directed.

S&F in repairs 15 mm bore stop cock (angle valve), cast copper alloy, fancy type, chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 15 mm bore bib taps, fancy type, cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferulle and fixed complete as specified and directed.

S&F in repairs brass chromium plated shower rose 125 mm in size with or without swivel joints any size including fixing to steel pipe or union, complete all as specified and directed.

S&F in repairs vitreous china wash basin, white, oval type, size 550X400mm including CP waste coupling, PVC waste pipe and brackets fixing in position complete all as specified and directed.

S&F in repairs 15 mm, swan neck, pillar tap, cast copper alloy, fancy type, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in replacement of jet spray with holder on EWC in repairs complete all as specified and directed.

S&F in repairs health faucets with holder CP with 1.2 mtr long flexible pipe complete all as specified and directed.

Taking up or down 20 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F of 20 mm unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid in trench fittings and fixed to wall and ceiling or laid in floors complete all as specified and directed.

S&F in repairs vitreous china wash down water closed pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) and including plastic seat cover complete all as specified and directed.

S&F in repairs 32mm bore HDPE waste pipe for wash basin complete all as specified and directed.

S&F in repairs vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including urinal spreader, waste coupling and waste pipe complete all as specified and directed.

S&F in repairs vitreous china squatting pan "Orissa" pattern size 580x440 mm white, with integral foot rest (exculding flushing cistern and flush pipe) including cement concrete bedding complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed in walls complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed in walls complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repairs PVC (SWR) bends, any radius 110 mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) bends, any radius 75 mm dia complete all as specified and directed.

S&F in repairs 75mm dia PVC (SWR), floor/nahani trap with grating including jointing with solvent cement complete all as specified and directed.

Dismantling of mild steel work of any description not other wise provided for complete all as specified and directed.

S&F of angle iron and rolled section as in main and cross beams hip, jack rafters, hollow section purlins, posts, where connected to common rafters and running rails and guides for sliddinng doors fixed with angle cleats or other connecting plates of grade Fe-410, complete all as specified & directed.

Dismantling of wall and celing hard boards/AC sheets and plywood in any thickness and any position including cover fillets complete all as specified and directed.

M&L for galvanised cold rolled steel section frame work size 600x600 grid size 24x38x0.30 mm Tee (bottom pre-coated) and 24x24x0.30 mm thick wall angle, galvanised cold rolled steel section including suspenders as per (Gabsec) manufacturs instruction as in ceiling complete all as specified and directed. Make Gabsec or equivalent as approved by the GE.

M&L for asbestos free calcium silicate board, decorative type of size 600x600x4mm thick fixed to steel frame work as in ceiling complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F of pre- painted galvalume aluminum zinc coating GI Based corrugated steel sheeting 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed.

S&F of pre-painted aluminum zinc coating GI based plain steel sheet of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Taking down chowkhats or frame n.exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 sqm but n.exc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

S&F of factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.

S&F of factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows and other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) and 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.

S&F of stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperure 1.18 mm and fixed and with tinned tacks or galvanised wire staples, complete all as specified and directed.

S&F of 200 mm stainless steel handles, D type, anodised complete all as specified and directed.

S&F of 200 mm stainless steel, tower bolts extruded section and fixed complete all as specified and directed.

S&F of 250mm long, stainless steel, sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections or cast aluminium alloy complete all as specified and directed.

M&L for powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for powder coated (minimum thickness of powder coating 50 micron) aluminium sliding window (three track) with aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware ie. handles, barrel tower bolts, hinges etc, powder coated aluminum snap beading, screws etc complete all as specified and directed Note : Panel filling ie. glass, wire mesh etc. shall be measured and paid separately.

Dismantling of water tank capacity exc 500 ltrs but n.exc 1000 ltrs and removing to stores complete all as specified and directed.

S&F of 1000 Ltr, rotational moulded polyethylene water stotage tanks (cylinderical verticle with closed top) hoisted and fixed in position complete all as specified and directed.

Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means and M&L for applying two coats of exterior weather proof water base emulsion paint white or tinted over and including one coat of white cement based putty (where required) complete all as specified and directed. Note - (i) Cement Putty shall be measured and paid separetely. (ii) Complete removal of existing surface to be carried out by using mechanical scrappers and wiped clean with cotton cloth so that no dust/loose particles remain on the surface complete as directed by Engineer-in-charge. (iii) Cracks upto 3 mm thickness shall be filled with crack seal of M/s Asian Paint or equivalent as approved; quoted rate is deemed to include for this aspect.

Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, and applying two coats of oil emulsion distemper, white or tinted over one coat of white cement based putty (where required) complete all as specified and directed. Note - (i) Cement Putty shall be measured and paid separetely. (ii) Complete removal of existing surface to be carried out using mechanical scrappers and wiped clean with cotton cloth so that no dust/loose particles remain on the surface complete as directed by Engineer-in-charge. (iii) Cracks upto 3 mm thickness shall be filled with crack seal of M/s Asian Paint or equivalent as approved. Quoted rate is deemed to be included in quoted rate.

M&L for preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of old or previously treated surfaces wood/wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for foundation etc or for manholes, laying of pipe lines, cables, pipes etc harde/dense soil and getting out complete all as specified and directed.

S&F of class SN 8 structural wall polyethlene piping system (Pipe with online coupler and elastomeric rubber ring) with hollow annular profiled outer surface and a smooth inner surface (double wall plain) for non pressure underground drainage and sewarage appilcation type-B nominal size (DN/ID ) 200 made of polyethlene material confiming to ISI- 6098 and to be transported handled installed and joined complete all as specified and directed.

S&F of 5000 ltr FRP, septic tank wall thickness 60 mm, top and bottom thickness 8 mm number of partition 02 partition thickness 3 mm with internal and outlet with 3 inch and 4 inch with gas pipe outlet complete all as specified and directed.

Soakage wells exc, in ordinary soil, foundation in PCC 1:3:6, wells of honey combed and solid in M-25 Concrete, including intercepting chamber, screen chamber brick work in CM, RCC cover slab in M-25/ RR masonery/ filling with brick bats, complete of size 2.4 m dia, 4.5 m deep complete all as specified and directed.

M&L for preparation of old or previously treated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat synthetic enamel paint complete all as specified and directed.

Dismantling of posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling of fencing wire mesh, any type complete all as specified and directed.

Excavation in post holes (or similar holes) each n.exc 0.50 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in hard dense soil complete all as specified and directed.

M&L for cement concrete (nomaial mix) type B-2 ,1:2:4 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description complete all as specified and directed.

M&L for mild steel angle (ISI Mark), flat work as in posts and struts in fencing including cutting tops to shape as directed drilling holes, notching for wire etc flat iron fillets (for secruing wire mesh etc) including all necessary drilling bolting or riveting etc, mild steel flat iron as in clamps, hold fasts wind ties and mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 10cm but not exceeding 5 cm long and dia of shank 11 to 15mm complete all as specified and directed.

S&F of chain link fencing including line wires, 50 x 50 mm mesh, any dia, type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.

M&L for preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for framed work such as grills, gratings, gate including welding etc with ends of bars souldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railing, frame work of water tanks and similar work conforming to Fe-290, Gde E-165 complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and n.exc 1.5 mtr in depth for foundation etc or for manholes, laying of pipe lines, cables, pipes etc harde/dense soil and getting out complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coat of cement base paint over 2 mm coat of putty complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2, concrete bed to drain pipes 200 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested; complete all as specified and directed.

M&L for PVC(SWR) pipes, single socketed, in any length, with rubber rings 75mm dia as in weep holes complete all as specified and directed.

M&L for heavy duty, flooring tiles, harsh weather & UV resistance, high abrasion resistance, MOH hardness >6, 10 mm thick, area of each tile not less than 0.09 sqm, anti slip type, laid in floors, steps, edges, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tile with and including 15mm thick rendering in CM 1:4 including dismantling old tiles complete all as specified and directed.

Taking down copper/aluminium point wiring (Light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking cerdit (credit for above items should be made as per conditions seperately) and making good disturbed surfaces of walls, floors etc complete all as specified and as directed.

M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor - stranded copper conductor 1.5 Sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked with valid CML No in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/ roof floor etc. ISI marked with valid CML No (IS-9537-1983 for conduits and IS-3419-1976 for conduit accessories) with mild steel/pressed steel sunken boxes (with earth dolly duly painted with coats of anti corrosive paint amluminium paint over a coat red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated ssheet cover for fixing of switches, sockets and fan regulators etc. including PVC insulated multi-stranded copper condutor 1.5 Sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connection complete all as specified and as directed.

(a) One light /Fan /bell/exhaust point controlled by one switch

(b) One 3 pin socket outlet on same board

All as per item No 84.00 here-in-before but wiring with 4.0 Sq mm FRLS multistranded copper conductor cable for 5/15 Amp switch socket combination on independent board and with 4.0 Sq mm FRLS insulated multi-Stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed.

S&F of modular switch one way 6 Amp one module, 240 volts complete all as specified and directed.

S&F of modular socket outlet 2-in-1, 5 pin 6 Amps, 240 volts, controlled by one switch complete all as specified and directed.

S&F of modular socket outlet 2-in-1, 2/3 pin 6/16 Amps, 240 volts, controlled by one switch complete all as specified and directed.

S&F of modular switch 6 pin 16 Amp 3 module, complete all as specified and directed.

S&F of modular metal flush box of 6 module complete all as specified and directed.

S&F of modular metal flush box of 4 module complete all as specified and directed

S&F of modular metal flush box of 3 module complete all as specified and directed

S&F of modular white cover plate of 6 module complete all as specified and directed

S&F of modular white cover plate of 4 module complete all as specified and directed

S&F of modular white cover plate of 3 module complete all as specified and directed.

S&F of ceiling rose, surface type, 3 terminal, 240 volt complete all as specified and directed.

S&F of lamp holder PVC/polycarbonate type with back plate suitable for batten fittings with 9 Watt LED bulb complete all as specified and directed.

S & F single pole and neutral enclosure with two pin and earth, plug and socket , suitable for single phase 240 V,complete with one single pole MCB of capacity 20 amps having `C` charactristic, breaking cap 10 KA, including industial plug top, complete all as specified and as directed. Make : Legrand cat part No. 607841 or equivelent in Schinder/ L&T.

Taking down old unserviceable sub main wiring of any size and any discription all as directed by Engr-In-Charge.

M&L for Sub main wiring with two single core FRLS PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in non metallic rigid PVC conduit of size 25 mm dia ISI marked including PVC insulated unsheathed 4 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete.

Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including taking down existing unserviceable fitting any type any size andcomplete

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size

Taking down main switches/MCB DBs of any capacity/type including MCBs.

S & F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar, 4 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP-43, including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed.

S&F RCBOs for earth leakage, overlaod and short-circuit protection, double pole 30mA ,16 Amp Complete all as specified and directed.

S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' Curve including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge.Make- Legrand/ Seimens/ Schinder.

Taking down & Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers

M&L for earthing complete with galvanised steel earth plate electrode 60×60cm×6mm thick, buried directly in ground (earth pit not less level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron earth wire of 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 SSR including earth pit in any soil char coal common salt , 15 mm all around earth plate PCC (1:3:6) type culprit, with 40 x40x6 mm angle iron frame and PCC cover (1:2:4) type B1 , water pipe funnel and GI protection pipe, light grade, 15mm dia upto panel connecting earth lead to panel all as specified and directed by EIC. Note : Earth continuity conductor including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate.

Excavation in trenches nexc 1.5 mtr wide and n exc 1.5 mtr in depth and getting out in soft/ loose for laying cables, erection of poles or for manholes, laying of pipe complete all as specified.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified.

Removing surplus excavated soil nexc 50 mtr and depositing where directed at a level n-exc 1.5 mtr above the starting point.

M&L for sand cushioning/sand covering for underground cable protection complete all as specified.

M&L for brick Sub Class 'B' locally available best quality laid in trenches above sand cushioning for cable protection complete all as specified.

Supply and Laying XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 10 sqmm 2core, laid in trenches/floor or fixed on wall/pole including takng down old unservicable cable complete all as specified & directed.

S&F for GI pipe, light grade, galvanised, with all fitting and laid in floors, under road, pavement or hard standing steel water tubing bore of tube 25 mm.

Taking up or down steel tubing and connection including all as specified and directed of following size:-

(a) 50 mm bore

(b) 25 mm bore

(c) 20 mm bore

Supply, fixing & laying in repairs GI tubing, medium grade, with one socket both end threaded in any length including cutting threading connection in new or old position and all type of GI new fittings for laid in trenches/wall/ceiling/ floor/ all as specified and directed of following size complete all as specified & directed.

(a) 50 mm bore

(b) 25 mm bore

(c) 20 mm bore

M&L for refixing of existing old GI tubing and connections in new or old position including cleaning internally and externally, laid in trenches/wall/floor/ceiling including all type of new fittings i.e. sockets, Tee union elbow etc all as specified and directed of follwing size:-

(a) 50 mm bore

(b) 25 mm bore

(c) 20 mm bore

S&F for 25 mm bore, Gun metal globe or gate valves, conf to IS 778 with iron wheel head, screwed both ends for iron pipe and fixed in existing or new position including taking out unserviceable Gun metal globe valve complete all as specified & directed.

All as per ser item no 120.00 here-in-before but 20 mm bore

Deduct Schedule of credit (calculation will be done off line) Rs. 69059.00

M/S Shanti Traders

JYOTI ENTERPRISES

M/s VIKAS TRADERS

M S MEWALAL UPADHYAY

RAJPATI CONSTRUCTION

M/S AJAY JAIN

AJIT ENTERPRISES