REPAIR/MAINTENANCE OF STREET/BUILDING SECURITY LIGHT, REPAIR/MAINT OF DG SET AND MISC REPAIR AND OTHER CONNECTED WORKS AT KWC AREA, METCALFE HOUSE AND JCB AREA UNDER GE I RND DELHI

Amount

S&F in repair of Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 09 Mtr long. Poles shall be coated with two coats of black bituminous paint throughout internally and externally up to the planting depth. The remaining portion of the exterior shall be painted with one coat of red oxide primer including taking down old unserviceable pole complete all as specified and directed. Note: PCC earth work shall be measured and paid separately

Shifting of steel tubular existing serviceable poles 09 mtr long, demolition of PCC for taking out poles and making good disturbed surface, all accessories (junction box, street light, service connection cable, clamp) without any damage from one place to another place not exceeding 200 mtr and errection at new place. Poles shall be coated with two coats of black bituminous paint throughout internally, and externally up to the planting depth complete all as specified and directed. Note:-Necessary excavation and foundation etc for errrection of poles shall be measured and paid separately.

Material and Labour for earthing complete with GI earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not less than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron strip of 25x4 mm by means of Copper nuts, bolts and washers. Strip laid in 40mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following complete all as specified and shown in electrical plate No 3 of SSR Part-I & testing on completion :- (a) GI strip of size 25mm x 4mm. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) Excavation & earthwork in any type of soil PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 50mm thick 1:2:4 type B1 reinforced with 8mm dia mild steel bar 75mm centre to centre with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover.

Excavation in trenches not exc 1.5 mtr wide and n. exc 1.5 m depth and getting out in soft/loose soil for laying UG cables of various sizes including taking out bricks and GI pipe complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n. exc 25 cm in any type of soil complete all as specified and directed.

Removing surplus excavated materials to a distance n. exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

Supply and lay in trenches burnt brick sub class 'B' (old size) for cable protection keeping width of the brick parallel to the length of the cable complete all as specified and directed.

Supply and spread clean dry river sand in trenches, ducts including leveling, punning for cushioning of cables complete all as specified and directed. Note: Punned thickness of sand cushioning shall be measured.

Supply and laying in trenches, fixed to wall/pole/pipe etc UG cable XLPE insulated armoured heavy duty electric with aluminium conductor 1100 volts grade of cross sectional area for following size complete all as specified and as directed:-

16 Sqmm 4 Core.

25 Sqm 3.5 Core.

35 Sqm 3.5 Core.

10 Sqm 2 Core.

Supply and fix in repair MCCB 400 Amps four pole 415 volts 50 Hz, breaking capacity 36 KA complete all as specified and as directed.

All as per item No 10.00 above but of capacity 250Amps.

All as per item No 10.00 above but of capacity 200Amps.

S&F in repair of GI bracket made of 40 mm dia medium grade GI pipe bend to shape approx 1.2 mtr length including GI clamps of size 25x4 mm thick two numbers for fixing GI brackets with pole complete for fixing of street light complete all as specified and directed.

S&F Junction box SMC KIOSK box water proof IP-54 of size 140x140x95 mm incl fixing of terminal connector 100A 4 pole suitable for in and out connection of 4 core cable fixed on pole complete all as specified and directed.

S&F Copper cable 2.5 Sqmm 3 core PVC sheathed multi core for connection of street light inserting from top in side the pole and connecting in junction box complete including making Hole in Pole as per Site, complete all as specified and directed.

M&L for PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) for foundation of pole complete all as specified and as directed.

M&L for PCC (1:2:4) type B2 (using 40 mm graded stone aggregate) for foundation of pole compete all as specified and as directed.

M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) for base foundation of pole all as specified and as directed.

S&F in repair LED Post Top Lantern 25 watt luminaire with diffuser and painted spun aluminium deflector including 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light fittings complete all as specified and directed.

S&F in repair LED Post Top Bolard light 10 W, UFO shape IP-65 including nesessory excavation and PCC work for fixing including 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light fittings and taking down old unserviceable complete all as specified and directed.

S&F in repair of New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device. of capacity 90 Watt including 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light fittings and taking down old unserviceable complete all as specified and directed.

S&F in repair New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source with toughened glass top cover. TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device. of capacity 120 Watt including 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light fittings including taking down old unserviceable complete all as specified and directed.

S&F in repair of energy saving, environment friendly, long life, exclusive innovative die-cast aluminimum flood light with higly efficient IP-66 LEDs as light source, suitable for higlighting architectural features or retail spaces of capacity 180 Watt complete completed with connection including 3 Core 1.5 Sqmm multistranded flexible copper conductor cable from connection junction box to light fittings including taking down old unservieable complete all as specified and directed.

S&F in repair of Energy saving, environment friendly, long life, exclusive innovative die-cast aluminium flood light with highly efficient IP- 66 LEDs as light source, suitable for highlighting architectural features or retail spaces of capacity 100 Watt completed with connection including 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light fittings including taking down old unserviceable complete all as specified and directed.

S&F in repair of Energy saving, environment friendly, long life, exclusive innovative die-cast aluminium flood light with highly efficient IP- 66 LEDs as light source, suitable for highlighting architectural features or retail spaces of capacity 120 Watt completed with connection including 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light fittings including taking down old unserviceable complete all as specified and directed.

S&F in repair of driver for 90W LED street light fitting complete all as specified and directed.

S&F in repair of driver for 120W LED street light fitting complete all as specified and directed.

S&F in repair of GI pipe light grade 50mm dia for laying of protection of UG cable complete all as specified and directed.

S&F in repair of GI pipe light grade 40mm dia for laying of protection of UG cable complete all as specified and directed.

S&F in repair of timer switch astronomical type 415 volt three phase of 63 Amps rating with three pole ML-4 contactor including one toggle switch for auto, off and manual function and incomming MCB TP internally pre-wired complete and fitted inside steel enclosure all as per site requirement complete all as specified and directed.

Supply and fixed in replacement of Environmental friendly, new generation, energy saving, decorative spike light using COB LED 09 watt as light source 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light fittings including taking down old unservicable light fittings complete all as specified and directed.

Supply and fixed in replacement of High light intensity empowered colour changing & monochromatic LED under water fountain light with polarized light design & intelligent logarithmic control technology of capacity watt 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light fittings including taking down old unservicable light fittings complete all as specified and directed.

M&L in replacement of Decorative Pole Crown GI with PL (photo luminescent) painted 3.5 Mtr Long with single side bracket Base Shape 300X300X12mm including necessary excavation and PCC work as per OEM and including taking down old unserviceable pole complete all as specified and directed.

S&F in replacement service cable 1100 volts grade heavy duty PVC insulated copper multistranded conductor served with inner sheathing of size 1.5 Sqmm 3 Core complete including taking down of old burnt cable complete all as specified and directed.

Material and Labour for earthing complete with GI earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not lesss than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with GI wire 4.00mm by means of nuts, bolts and washers. GI Wire laid in 15mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) as shown in electrical plat No. 03 of SSR Part-I including test point & testing on competion with following:- (a) GI wire 4.00mm dia. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 25mm thick re-inforced with 8mm dia bars 75mm centre to centre both ways with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover.

M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or any other indicated situation for loop earthing etc as required 4 mm galvanised iron wire complete all as specified and directed.

M&L pole painting 9.0 mtr long with a coat of aluminium paint after preparation of old painting surface by scrappining including marking of black and yellow strip not less than 30 cm width with sythethic enamelled paint from coping to upto height 1.5 mtr of pole alternative way including necessary `MES & Pole number to be wriiten in the circular yellow batch on the pole all as specified and directed.

S&F in repair ACP retro sign board of size 250 x 250 mm using retro reflective high intensity prismatic reflective sheeting. The back ground of board is red colour with white border and writing letter, numbers upto 10 cm with white colour, retro sign board shall be pasted on 3mm thick ACP sheet. The board shall be fixed on steel tubular poles including fixing of GI clamps of size 20x3mm, nuts, bolts, washer etc complete all as specified and directed.

S&F in repair of new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening separate driver compartment with IP66 protecting and impact resistance of IK07 with 10KV built-in surge protection Device of capacity 36 watt including 3 core 1.5 Sqmm multistranded flexible copper conductor cable from connection junction box to light fittings and taking down old unserviceable complete all as specified and directed.

M&L for boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique/manually/mechanically and necessary machine for laying of 100mm dia GI pipe complete all as specified and directed Note: GI pipe shall be measured and paid separately.

S&F GI pipe 100mm bore medium grade conforming IS1239 complete all as specified and directed.

Supply, installation testing and commissioning of outdoor type LT Panel outdoor type 3.15 mm thick of size 1000x600x450mm (approx) factory made polycarbonate (shock proof, rust free, corrosion free, dust proof, acid and chemical resistant, fire retardant, having high impact, made of halogen and silica free, recyclabel material ) UV resistant, having high grade gasket made of polyurethane, should withstand glow wire test at 96ºC should be flame retardant. The LT panel should be as per CPRI certification IP-66 with switchgear assemblies as per IEC 60439-1. The LT Panel mounted on angle iron frame of size 40mmx40mmx6mm thick including 60 CM height from Ground Level and necessary PCC work 1:2:4 are deemed to be included in the quoted rate complete with multifunctional meter, Phase indicator LED Lamp for RYB phase having front opening Door with locking arrangements and suitable to accommodate the following :-

S&F in repair of IP 67 rated flexible LED strip light 36 watt including driver 5.0 mtr length to add great color & dramatic effects with extensive pallet of colors including DMX controller with accessories 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light fittings including taking down old unserviceable fitting complete all as specifed and directed.

M&L for B check general servicing by authorised rep of manufacturer of DG set of capacity 320 KVA including, replacement of oil filter, fuel filter, air filter, by pass filter cleaning of radiator with chemical after draining out engine/ lubrication oil, coolant flushing and cleaning of oil chamber after opening of tappet cover/ top cover tappet clearence setting with injector timing adjustment reaffixing of tappet/ top cover including replacement of tappet cover packing set, bonding and leak proof sollution, oil pan/ chamber gasket at the servicing and other work comes under B Check service as mentioned in B Check by the manufacturer all as speciied and as directed. Note:-Engine oil & Coolant will be paid separately under respective item. Make of DG Set- Kirloskar/Greaves/Cummins/Sudhir

S&F in repair starter 24 V including rewinding of armature with super enamaled copper conductor wire of superier quality as per existing gauge, turn and pattern and replacement of bendex drive, carbon brush including services suitable for DG set 320 KVA complete all as specified and directed.

S&F in repair of automatic battery charger with auto cut OFF suitable for charging of 2X12V 180AH batteries complete with all required necessary wiring.

S&F in repair of self starter 24 volts suitable for 320 KVA DG sets complete all as specified and directed.

S&F in repair of power contactor 630 Amps capacity suitable for AMF panel of DG sets a per matching to existing complete all as specified and directed.

S&F in repair of battery brass terminals heavy duty suitable for 12V 180 AH battery with minimum 2 RM Battery Lead of copper Cable single core all as directed.

S&F in repair of engine starting relay suitable for DG set of capacity 320 KVA as per matching to existing complete all as specified and directed.

S&F in repair of Voltmeter analog type for voltage range of (0-500V) complete with all accessories and wiring complete all as specified and directed.

S&F in repair of Ammeter analog type for current range of (0-1000Amps) as per matching to existing complete with all accessories and wiring complete all as specified and directed.

Opening the DG set of 320 KVA, repair to any leakage in radiator, greasing of all movable parts & equipments and replacing all flexible/steel wire mesh type hose pipes including fuel pipe line, belts & Bearings including re-assembling the complete Parts and Testing complete all as specified and directed. Note:- Spare part shall be measured and paid separately. Make of DG Set- Kirloskar/Greaves/Cummins/Sudhir

S&F Piston ring and liner for 320 KVA DG Set as per existing make & OEM complete all as specified and directed.

Supply only Head valve, Head Guide, Head sheet & Head seal for 320KVA DG Set as per existing make & OEM complete all as specified and directed.

Supply only Injector sleeves & Head gasket for 320 KVA DG Set as per existing make & OEM complete.

Supply only Packing Kit for 320 KVA DG Set as per existing make & OEM complete.

Supply only Head and fuel injector assembly complete for 320 KVA.

Supply only Turbo assembly complete for 320 KVA.

Supply and Fix in repair Fan belt of existing size for DG Set of capacity 320 KVA

S&F in repair fly wheel ring of DG Set of capacity 320 KVA.

Draining out the diesel tank, cleaning/washing out the sludge and re-filling with diesel for the DG Set of capacity 320 KVA.

M&L for Spray painting of diesel generating set of capacity 320KVA with accostic enclosure one coat of synthetic enamel paint, body colour shall be apple green, black for foundation base frame, red for all guards for all as directed.

S&F in repair AVR system for DG set of capacity 320 KVA

Supply only Engine oil 20W/40 for DG Set.

Supply only Coolant for DG Set.

S&F in repair of under voltage relay suitable for DG set upto 320KVA capacity .

S&F in repair XLPE insulated screened, PVC bedded galvanised steel strip or wire armoured electric power cable(Heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 10 Sqmm 4 core complete all as specified and directed.

S&F in repair XLPE insulated screened, PVC bedded galvanised steel strip or wire armoured electric power cable(Heavy duty) ewith aluminium conductor, 1100 volts, grade cross sectional area 16 Sqmm 4 core complete all as specified and directed.

S&F in repair of complete wiring set with single core multistranded copper conductor cable with flexible conduit for DG set of various capacities.complete all as specified and directed

S&F in repair PVC insulated FRLSH Copper conductor industrial cable PVC round sheated cable for Voltage 1100 V of size 2.5 sqmm 3 Core complete all as specified and directed.

Disconnecting, taking out surface mounted/hanging LT XLPE cable of sizes 25 Sqmm to 95 Sqmm 3.5 core and relaying in trenchescomplete all as specified and directed. Note:- Earth work shall be measured and paid separately.

All as per ser item No. 67.00 above but 120 Sqmm to 240 Sqmm 3.5 core

Supply and laying in replecement of old unserviceable XLPE insulated screened, PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 240 Sqmm 3.5 core complete all as specified and directed.

Supply and laying in replecement of old unserviceable XLPE insulated screened, PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 300 Sqmm 3.5 core complete all as specified and directed.

Supply and laying in replecement of old unserviceable XLPE insulated screened, PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 400Sqmm 3.5 core complete all as specified and directed.

Supply and laying in repair GI pipe medium grade of 50mm dia fixed complete to walls and ceilings or laid in floors laid in trenches for Post top Lantern

S&F Junction box SMC KIOSK box water proof IP-54 of size 140x140x95 mm incl fixing of terminal connector 100A 4 pole suitable for in and out connection of 4 core cable fixed on pole complete all as specified and directed.

S&F in repair of LED Bolard light 8 W, BAMBOO type IP-65 including nesessory excavation and PCC work for fixing including 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light fittings including taking down old unserviceable complete all as specified and directed.

S&F in repair of LED Garden spike light 12 W, cob integrated Aluminium Green colour light including nesessory fixing and fixtures including 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light fittings including taking down old unserviceable complete all as specified and directed.

S&F in repair of old Post Top/ Garden light with decorative LED Post Top lantern long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire of capacity 25 Watt IP65 including taking down old unserviceable and suitable bracket for fixing of street light complete all as directed.

M&L for painting of steel/ Metal surface by cleaning the existing old paint with the help of mechanical tools such as wire brush, scraper and sand paper from the surface of with two coat of heat resistant paint on steel surface all as specified and directed.

Dismentling and Shifting of old Serviceable LT Panel from one place to another suitable place and installation, Commissioning, testing of LT panel testing of LT panel including reconnection & fixing of existing cables with panels using with new lungs & gland of suitable size complete all as specified and directed. Note: All PCC work for fixing panel legs and connectinons of the existing cables and fixing the cable with the panel (type from using new lugs and glands of suitable size complete all as specified and directed.

Cutting branches and bushes of trees of 2Mtr radius around the street light polesof 9.00 Mtr long all as specified and as directed.

dee een enterprises

GAURAV ASSOCIATES

Commercial Traders