REPAIR REPLACEMENT OF ALUMINIUM DOOR/WINDOW AND FLASE CEILING AND STEEL WINDOW GATE AND ALLIED WORKS AT AF STN SINGARSI UNDER

Amount

Taking down chowkats or frames with shutters n.exc 1.50Sqm (without taking off shutters from the frames),complete all as specified and as directed.

All as per serial item No. 1 above but exc 1.50 Sqm and n.exc 4 Sqm each.

Taking down steel window/ventilator including guard bar,complete all as specified and as directed.

S&F steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded,complete all as specified and as directed.

All as per item No 4 but without glazing bars.

M&L for steel ventilator with top hung shutter including hinges steel peg stay,complete all as specified and as directed.

All as per item No 6 but as in ventilator top hanging shutter without glazing bars.

Supply and fabrication of Mild steel guard bars and welded to window frames,complete all as specified and as directed.

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat red oxide primer,complete all as specified and as directed.

S&F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified and as directed.

S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc, complete all as specified and as directed.

S&F powder coated Anodised aluminium Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

Taking down aluminium doors of any size including necessary repairs works and refixing if requires to aluminium section ,floor spring, door closer,door lock complete all as specified.if hardware item is not repairable the same shall be replaced with new and payment shall be made under respective items,complete all as specified and as directed.

S&F in repair double action floor spring hydraulically regulated made up of min 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made up of brass, other parts made of mild steel heavy duty and fixed,complete all as specified and as directed.

S&F Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed,complete all as specified and as directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor,complete all as specified and as directed.

S&F MS lock, vertical type suitable for aluminium door of size 150 mm,complete all as specified and as directed.

S&F MS lock, vertical type suitable for aluminium door of size 100 mm,complete all as specified and as directed.

S&F MS lock, vertical type suitable for aluminium door of size 75 mm,complete all as specified and as directed.

S&F in repair for 4 mm thick plain glass ordinary quality & glazing with oil and putty in square n. exc 0.5 sqm in each pane, complete all as specified and as directed.

S&F in repair for 3 mm thick plain glass ordinary quality & glazing with oil and putty in square n. exc 0.5 sqm in each pane, complete all as specified and as directed.

S&F in repair stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls, Chajjas etc., including raking out joints, hacking for key, scrubbing down with water etc., ncl removing rubbing to a distance exceeding 100m, complete all as specified and as directed.

Material & Labour for 15mm thick rendering in Cement Mortar 1:6 on brick work or concrete surfaces, finished even and smooth without using any extra cement, complete all as specified and as directed.

Material & Labour for two coats of oil bound distamper over a coat of primer on new plastered surfaces including preparation of surface,complete all as specified and as directed.

M&L 3mm thick wall care putty on wall omplete all as specified and as directed

M&L for three coats of white wash on newly plastered surfaces of wall including preparation of surface,complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillar including coping etc,complete all as specified and as directed.

M&L for brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.

M&L for half brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:4), complete all as specified and as directed.

S&F in repair Stainless steel peg set of six fixed to wall, complete all as specified and directed as approved by Engr in charge..

Dismantling of wall and ceiling boards( fibre pulp insulation etc) any thickness including cover fillets,complete all as specified and as directed.

S& F non asbestos fiber cement building boards fixed to or laid/inserted to GI framework with screw for fixing 600mm x 600mm grid (frame work for celling shall be measured and paid separately) 06mm thick in celling fixed with screw as per manufactures's instruction and acoustic purpose 60x60 cm in size.fixed with snap grid by screw etc completed all as specified and as directed.NOTE: (The rate inclusive of scaffolding and necessary arrangements(ht of building shall be up to 10m ).NOTE: (The rate inclusive of scaffolding and necessary arrangements(ht of building shall be up to 10m ).

S&F of prepainted GI snap grid frame work for flase celling all as specified and directed by Engr-in-charge

S&F 12 mm thick Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed. .NOTE: (The rate inclusive of scaffolding and necessary arrangements(ht of building shall be up to 10m ).

S&F in repair Anodised aluminium snap grid frame work for false ceiling all as specified . NOTE: (The rate inclusive of scaffolding and necessary arrangements),complete all as specified and as directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified . NOTE: (The rate inclusive of scaffolding and necessary arrangements),complete all as specified and as directed.

M&L for 3mm thick wall care putty on ceiling complete all as specified and as directed

M&L for preparing of surfaces plastered or unplastered ceiling surfaces and applying two coats of Oil bound distemper over a coat of alkali resistant primer over 3mm wall care putty complete all as specified and as directed.

S&F in repair 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balanceing white lamination fixed for door,complete all as specified and as directed.

Taking down shutter of any description exc. 1 sqm but n. exc. 2 sqm each and refixing in same position including resecuring or easing and adjusting,complete all specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons,complete all as specified and directed by Engr-in-Charge

M&L for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:4), complete all as specified and as directed.

M&L for Glazed ceramic coloured designer seamless tiles 450X300X7 mm to 8mm thick on vertical surface as in skirting, dado set and jointed with neat cement slurry and pointed in white or coloured cement to match with the surface over and including 10mm thick screed in CM (1:4),complete all as specified and directed by Engineer-in-Charge.

M&L for Vitrified tiles light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including screed bed 15 mm thick in CM (1:4),complete all as specified and directed by Engineer-in-Charge.

M&L for Vitrified tiles light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, as on vertical surfaces etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including 10 mm thick screed in CM (1:4) and taking out existing tiles,complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails,filling cracksand making good holes with birla white putty, and brooming to remove all dirt etc and applying one coat of Oil bound distemper on old prepared surfaces of walls, complete all as specified and directed by Engineer-in-Charge.

DANATION CONSTRUCTIONS (BID ID -3173252)

M/S New Builders Corporation (BID ID -3173080)

LALAN SHARMA (BID ID -3174482)