Combined Package for Work A- Estab. 110kV S/s at Revaggi and constr. of 110kV line-23.433km, Work B- Estab. 110kV S/s at Azadpur(Hagarga) Village and constr. of 110kV line 9.499km, Work C - Estab. 110kV S/s at Yagapur (Belagera) and constr. of 110kV line- 15.68km, Work D- Estab. 110kV S/s at Tavaragera (Keroor) Village and constr.110kV line-5.754km Work E- Estab. 110kV S/s at Pattan(Hatagunda) village and constr. of 110kV line-0.370km on Partial Turnkey Basis

Power Transformer:

20 MVA, 110/33-11 kV Transformer, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC ...

Nitrogen Injection fire extinguishing system-supplying, erection of the fire lighting system for Power Transformer below 100 MVA per technical specifications.

Circuit Breaker :

SF6 Gas circuit breaker with Semi-Pneumatic/ Pneumatic operated / Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal conne...

ii) For 110KV Transformer

Isolators : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators:

A. 110KV, 1250A, 40KA Class Do...

ii) Upright mounting type without Earth switch.(Live point height 4600mm)

iii) Upright mounting type without earth switch. (Live point height 6350mm)

WORK A:Terminal connectors for Isolators shall be as follows:

Rigid type suitable for Moose ACSR- 27 Nos

Flexible type...

B.11 kV Isolators:

i) 11KV isolators, Double Break 400A, 25KA capacity with rigid bi-metallic terminal connectors suitable for coyote ACSR for Capacitor Bank

ii) 11 kV isolator, single break 400 A, 25 KA capacity with Roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR.

CURRENT TRANSFORMER:Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR conductor as per technical ...

ii)110 kV class, 40 KA, CT of ratio 400-200/ 1-1-1A for Lines

Core - 1 : Vk-1100 V at 600A, Rct 5 ohm at 600/1A, Accuracy class PS-Dist/Dif

Core- 2 : 10 VA, Accuracy class 0.2s- Metering

ii)110 kV class, 40 KA, CT of ratio 600-400/ 1-1-1A for Lines

Core - 1 : Vk-1100 V at 600A, Rct 5 ohm at 600/1A, Accuracy class PS-Dist/Dif

Core- 2 : 10 VA, Accuracy class 0.2s- Metering

11kV Class, 25kA, NCT of ratio 1200-800/1-1-1A for REFR Protection (of similar rating and ratio as that of Incomer of 11kV Switchgear) with terminal connector suitable for 2 Nos of Copper flats as pe...

VOLTAGE TRANSFORMER : Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR with marshalling box KIOSK as per technical specifications

110 kV class 1...

SURGE ARRESTOR : (Porcelain housing) metal oxide, Gapless type with rigid bimetallic connectors suitable for Moose ACSR as per technical specifications

i) 96 kV, 10 KA, SM type -For overhead Lines

ii) 96 kV, 10 KA, SM type-For Transformers

iii) 9 kV, 10 KA with connector and clamp

Capacitor Bank: Design, Engineering , supply, erection, testing & commissioning of 2.9 MVAR, 12.1KV Capacitor Bank, star connected, Double Bank with internal fuses, terminal connectors, with suitable ...

Control and Relay Panel complete as per specifications:

Simplex type control and relay panels complete as per specifications.

i) For Power Transformer 110/11 kV

ii) For 110 kV Transmission line

1. All the C&R Panels and associated panels shall be of one and the same make for uniformity and interchangeability of Components.

2. The accuracy class of met...

Total Weight of of Station structures , Mounting Structures , Lightning Mast & street lighting structure fabricated out of galvanized mild steel .

Total Weight of supply of Bolts & nuts of Station structures , Mounting Structures , Lightning Mast & street lighting.

11 kV ODS and take of structure:

Supplying of Double pole structure with 9.5 Mts. RCC poles WL 300 Kgs for mounting 11 kV 400 A Roaster Isolators and 9 kV, 10 KA surge arrestor (3 No) complete set ...

BUS BAR FORMATION :

Rigid bus with taps & clamps:

i) Aluminium pipe conforming to 6340WP of IS - 5082 / 1969 (BS I600-Sch. 40) of following nominal diameter a) 75mm.

b) 63mm size connecting isolator to vertical tap

ii) Straight taps suitable for 63mm Aluminium tube (BS-1600) of 1750mm vertical height for vertical portion & cross bus on 110KV side with rounded off end.

iii) A) Post insulator clamps suitable for 75 mm Aluminium pipe & Post insulator solid core type - 110kV side

b)Expansion Type

v) Corona Bell Suitable for Aluminium Pipe of size 75mm on 110 kV

vi) End cap suitable for 63mm Al tube

Post insulator Solid core 110kV, 1 unit/stack

Disc insulators 90kN

1.Single suspension Clamp suitable for 90kN insulator to suit for Drake ACSR. (110kV side)

2.Single Tension Clamp suitable for 90kN insulator to suit for Drake ACSR. (110kV side)

2.C Type wedge connector suitable for Moose - Panther (Line)

3. C Type wedge connector suitable for Moose-Lynx(Line)

3. C Type wedge connector suitable for Moose-Drake(Line)

Post insulator clamp suitable for Moose ACSR and 110kV Solid core insulator.

Auxiliary Transformer :

Supply of Station Auxiliary Transformer-copper winding with oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn 11 off load tap changer(5 taps) with step voltage ...

Supplying of DP structure with 9.5 mtr RCC poles, 11 kV 400 A double break isolators, 9 kV, 10 KA surge arrestor (3 No), H-Frame along with DOLO/HG fuse unit, LTprotection kit/LTD box, LT Trivector me...

LTAC Panel (Indoor), 415 V as per technical

specification comprising of voltmeter and ammeter,

1 I/C MCCB 200A + 2 nos. 3 Phase 63A O/G SFU,

+ 2 nos. 3 Phase 32A O/G SFU 100A ,6 nos. 3 Phase 16A SFU e...

AC Distribution box (outdoor) Single front type with 6 terminals 1200 x 1350 x 300 mm one I/C of 100 A MCCB 20 KA+ 6 O/G 16 A MCB +1 O/G of 100 A HRC Fuse panel 415 V outdoor type

LT Power armoured UG cable as per specification:

a) 1.1 kV class 4 X 95 Sq mm L T Aluminium Cable with glands/lugs/ferrules.

b) 1.1 kV class 4 X 25 Sq mm Copper Cable with glands/lugs/ferrules.

c) 1.1 kV class 4 X 10 Sq mm Copper Cable with glands/lugs/ferrules.

STATION BATTERY & BATTERY CHARGER :

110V, 200AH Battery set (Plante/Grid/Nickel Cadmium Type)with accessories as per specification

Battery charger- suitable for '1 X 110 V, 200 AH, Battery set (Plante/Grid/Nickel Cadmium Type)15 A float and 30 A boost (with float and boost battery charger as per technical specification).

LT DC Distribution panel (Indoor) as per Technical specification comprising of Earth fault indicator, Indication circuit for AC main failure, 1 No 100A SFU for IC + 12 nos., 32A SFU for OG etc,. compl...

1.1 kV Grade PVC Insulated armoured copper control cables of sizes,with Lugs/Ferrules/Gland as per technical specifications.

i) 19C x 2.5 Sq.mm

iii) 10C x 2.5 Sq.mm

vi) 4C x 6 Sq.mm

vii) 4C x 2.5 Sq.mm

viii) 2C x 6 Sq.mm

ix) 2C x 2.5 Sq.mm

11KV U.G. Cable with the required cable terminations at both ends as per specifications.

i) One run of 11kV, XLPE 95 sq.mm Al., 3 core cable - (to be run for Auxiliary Transformers from 11KV switch...

ii) 11KV XLPE cable, 1000Sq. mm. Aluminium cable from 110/11KV transformers to 11KV Switchgear.

iii) 11KV XLPE cable, 240Sq. mm. Aluminium cable 3 Core to be run from 11KV Switchgear to 11kV take off DP Structure.

iv) Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable ( Indoor type )

v) Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable (Out door type)

vi)Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable ( Indoor type )

vii)Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable (Out door type)

viii)Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable ( Indoor type )

ix)Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable (Out door type)

FIRE FIGHTING EQUIPMENTS WITH NECESSARY MOUNTING STANDS:

i)Foam type extinguisher (Mechanical) 50 Ltr. capacity

ii) Foam type extinguisher (Mechanical) 9 Ltr. capacity

iii) Water type (gas pressure type) 9 Ltr. capacity

iv) Carbon di-oxide type 4.5 kg Capacity

v) Sand type G.I Buckets 15 Ltr. Capacity

vi)Steel stands for above to have 4 buckets to each stand.

Maintenance Tools and Plant:

1) Portable(mobile) oil pumps (1/2 HP Air pump 500 to 1000 gallons)

2) Telescopic ladder Aluminium 6 Mtr. Height

3 )Ring spanner set

4) Tube spanner set

5) Pipe wrench 24 inch

6) Pipe wrench 18 inch.

7) Hydraulic crimping tools up to 1000 Sq.mm

8) Rubber hand gloves (15 kV tested)

9) Rechargeable 5W LED hand torch

10) Insulated cutting plier 12 inch size

11) Insulated cutting plier 8 inch size

12) Line live tester AC/DC 500 V

13) Screw driver 18"

14) Screw driver 12"

15) Hammer 8 lbs

16) Hammer 2 lbs

17) Chain pulley block 5 ton capacity

18) Hydraulic jack 5T capacity

19) Pipe derrick suitable for lifting 3 MT and lift of 6 Mtr. Height

21) Box spanners

22) Transil oil di-electric break down (with 2.5 mm gap 0-60 kV) Tester.

23) Insulation megger 2.5 - 5 kV

24) Insulation megger 500 V

25) SF-6 gas leak Detector

26)Multimeter electromechanical

27)Multimeter Electronic

29)DC Voltmeter range -5V to + 5V

30)Hydrometer syring suitable for vent holes

31)Specific gravity correction chart

32)Thermometer with wall mounting holder

33) Rubber appron

35) Protective goggle

36) Acid resisting jars (4 pint capacity)

37) Rubber shoes knee height

38) Glass funnel

39)Grounding sticks extendable upto 18 ft

40) Wall mounting type holder for hydrometer

MISCELLANOUS ITEMS

i) Rubber mats 1000 mm x 1000 mm x 10 mm size

ii) First aid box.

iii) Shock treatment charts, hard board, liminated with coloured pictures & literature both in Kannada & English.

iv) Water filter / Water purifier : Wall mounting type (Aqua-guard type).

v) Sub-station name board duly painted.

vi) Fixograph of size 1.5m x 2.5m with English / Kannada alphabets.

vii) Brass cupboard lock 6 levers (best make of approved quality) 75 mm size

viii) Danger board(prohibited) with support structure including fixing in front of the gate

ix) Equipment name plates and earthing name plates including fixing at outdoor yard

Furniture for Control Room Staff and maintenance staff

i) Steel Almirahs 6 1/2 feet

ii) Steel Almirahs 6 1/2 feet with glass panel doors

iii) Officers tables

iv) Steel Slotted angle rack (big Size)

v) Steel Slotted angle rack (small Size)

vi) Steel dustbins

vii) Executive revolving chairs

viii) ‘S’ Type Arm Chairs

ix) Steel folding Chairs

Equipments for establishing SCADA Communication :

i) Remote Terminal Unit (RTU)

ii) Data Concentrator Unit (DCU)

iii) 2 kVA online UPS (230 V AC 1 phase 50 Hz) with Battery set

Cables -Supplying

i) Current Cables-Copper Core with c/s 4.0 sq.mm Multistrand 4 Core

ii) Voltage Cables-Copper Core with c/s 2.5 sq.mm Multistrand 4 Core

iii) Signal Cables-armoured Copper Core with c/s 0.5 sq.mm Multi strand 10 Core

iv) Control Cables- Copper Core with c/s 1.5 sq.mm Multi strand 10 Core

v) Supply Cables-Copper Core with c/s 4.0 sq.mm Multi strand 3 Core for AC input to UPS & UPS to RTU,conforming to KPTCL specifications.

vi)Supply Cables-Copper Core with c/s 32.0 sq.mm Multi strand for Battery conforming to KPTCL specifications.

Note : Satellite Communication required will be arranged by SLDC.

STATION & YARD LIGHTING (OUTDOOR) (To be designed, assessed & quoted by the bidder):

Supply and installation/ Fixing/ Provision of Outdoortype Thermoplastic Modular Panel enclosure with transpare...

STATION & YARD LIGHTING (OUTDOOR) PVC Insulated Copper Control Cables : 1.1 KV PVC insulated Copper Control Cable with glands/Lugs/ Ferrules etc as per technical specification.

Supply & Fixing of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection mou...

Grand Total weight of Tower parts- High Tensile Steel 220kV & 110kV

Note:1)Rate to be quoted on per tonne Basis

2)For detailed breakup refer technocommercial sheet

Grand Total weight of Tower parts- Mild Steel 220kV & 110kV

Note:1)Rate to be quoted on per tonne Basis

2)For detailed breakup refer technocommercial sheet

Grand Total weight of Bolts,Nuts& Washers

Note:1)Rate to be quoted on per tonne Basis

2)For detailed breakup refer technocommercial sheet

Tower accessories :

i) Number Plates

ii) Danger Boards

iii) Circuit plate

iv)Phase plate (Set of 3 No.)

v)Earth bond 300 mm long

vi)Earth bond 450 mm long

Conductor & Earth wire :

Panther ACSR Conductor Plain Terrian

(With 1.5% Sag)

Lynx ACSR Conductor Plain Terrian

(With 1.5% Sag)

7/3.15 mm GI Ground wire Plain Terrian

I) Insulator strings for Panther ACSR/Lynx ACSR conductor as per technical specifications (110kV Line);

A. Tension insulator strings consisting of any one of the following:

A. Tension insulator str...

Insulator Strings suitable for Lynx Conductor:110kV line as per Technical Specifications

B. Suspension Insulator string consisting of 1X7nos. of 110kV, 90kN Disc insulators ...

B) Hardwares and Clamps for conductor with Arcing Horns suitable for Panther ACSR Condyctor:.

i)110kV Clamps, Arcing Horns and Hardwares (Set) suitable for Single Tension String fittings for Panthe...

ii)110kV Clamps, Arcing Horns and Hardwares (Set) suitable for Double Tension String fittings for Panther ACSR

iii) 110kV Clamps, Arcing Horns and Hardwares (Set) suitable for Single Suspension String fittings for Panther ACSR

iv) 110kV Clamps, Arcing Horns and Hardwares (Set) suitable for Double Suspension String fittings for Panther ACSR

C) Hardwares and Clamps for conductor with Arcing Horns suitable for LYNX ACSR Conductor:.

i)110kV Clamps, Arcing Horns and Hardwares (Set) suitable for Single Tension String fittings for Lynx ACSR

ii)110kV Clamps, Arcing Horns and Hardwares (Set) suitable for Double Tension String fittings for Lynx ACSR

iii) 110kV Clamps, Arcing Horns and Hardwares (Set) suitable for Single Suspension String fittings for Lynx ACSR

iv) 110kV Clamps, Arcing Horns and Hardwares (Set) suitable for Double Suspension String fittings for Lynx ACSR

Accessories for Panther ACSR Conductor :

i) MSC Joints suitable

ii)Pre formed armour rod

iii)Repair sleeves suitable

iv)P G Clamps suitable

v)Vibration dampers

Accessories for Lynx ACSR Conductor :

i) MSC Joints suitable for Lynx ACSR

ii)Pre formed armour rod suitable for Lynx ACSR

iii)Repair sleeves suitable for Lynx ACSR

iv)P G Clamps suitable for Lynx ACSR

v)Vibration dampers for Lynx ACSR

Hardware & Accessories for Earthwire :

i) MSC Joints suitable for Ground conductor

ii) Repair sleeves suitable for Ground conductor

iii) Single Tension clamps ( bolted type) suitable for Ground conductor

iv) Single Suspension clamps ( bolted type) suitable for Ground conductor

v) P G Clamps suitable for Ground conductor

Station Erection

Power Transformer:

20 MVA, 110/33-11 kV Transformer, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC ...

Circuit Breaker :

SF6 Gas circuit breaker with Semi-Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal conn...

ii) For 110KV Transformer

Isolators : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators:

A. 110KV, 1250A, 40KA Class Do...

ii) Upright mounting type without Earth switch(Live point height 4600mm)

iii) Upright mounting type without earth switch. (Live point height 6350mm)

B. 11 kV Isolators:

i) 11KV isolators, Double Break 400A, 25KA capacity with rigid bi-metallic terminal connectors suitable for coyote ACSR for Capacitor Bank

ii) 11 kV isolator, single break 400 A, 25 KA capacity with Roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR.

CURRENT TRANSFORMER : Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR conductor

i) 110 kV class...

ii)110 kV class, 40 KA, CT of ratio 400-200/ 1-1-1A for Lines

Core - 1 : Vk-1100 V at 600A, Rct 5 ohm at 600/1A, Accuracy class PS-Dist/Dif

Core- 2 : 10 VA, Accuracy class 0.2s- Metering

ii)110 kV class, 40 KA, CT of ratio 600-400/ 1-1-1A for Lines

Core - 1 : Vk-1100 V at 600A, Rct 5 ohm at 600/1A, Accuracy class PS-Dist/Dif

Core- 2 : 10 VA, Accuracy class 0.2s- Metering

11kV Class, 25kA, NCT of ratio 1200-800/1-1-1A for REFR Protection (of similar rating and ratio as that of Incomer of 11kV Switchgear) with terminal connector suitable for 2 Nos of 75mmx6mm Copper fla...

VOLTAGE TRANSFORMER : Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR with marshalling box KIOSK as per technical specifications

110 kV class 1...

SURGE ARRESTOR : (Porcelain housing) metal oxide, Gapless type with rigid bimetallic connectors suitable for Moose ACSR.

i) 96 kV, 10 KA, SM type -For overhead Lines

ii) 96 kV, 10 KA, SM type-For Transformers

iii) 9 kV, 10 KA with connector and clamp

Control and Relay Panel complete: Simplex type control and relay panels complete as per specifications.

i)For Transformers

ii)For 110 kV Transmission line

1. All the C&R Panels and associated panels shall be of one and the same make for uniformity and interchangeability of Components.

2. The accuracy class of mete...

Erection of Station structures,Mounting Structure,Lightning Mast & street lighting including Bolts & nuts

11 kV ODS and take of structure

Erection of Double pole structure with 9.5 Mts. RCC poles WL 300 Kgs for mounting 11 kV 400 A Roaster Isolators and 9 kV, 10 KA surge arrestor (3 No) complete set.

BUS BAR FORMATION :

Formation of Main/CrossBus with Single Moose/Drake Conductor.

Note: The scope also includes installing insulator strings complete with necessary Hardwares and stringing of the co...

Erection of Tubular bus including fixing of clamp, connector jumper, corona ring etc, Complete as per instruction of Engineer in Charge

i) Aluminium pipe conforming to 6340WP of IS - 5082 / 1969 (BS I...

b) 63mm size connecting isolator to vertical tap

Post insulator Solid core Insulator 110 kV, 1 Unit/stack

Auxiliary Transformer

Erection of Station Auxiliary Transformer-copper winding with oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn 11 off load tap changer(5 taps) with step voltag...

Erection of DP structure with 9.5 mtr RCC poles, 11 kV 400 A double break isolators, 9 kV, 10 KA surge arrestor (3 No), H-Frame along with DOLO/HG fuse unit, LTprotection kit/LTD box, LT Trivector met...

LTAC Panel (Indoor), 415 V as per technical

specification comprising of voltmeter and ammeter,

1 I/C MCCB 200A + 2 nos. 3 Phase 63A O/G SFU,

+ 2 nos. 3 Phase 32A O/G SFU 100A ,6 nos. 3 Phase 16A SFU e...

AC Distribution box (outdoor) Single front type with 6 terminals 1200 x 1350 x 300 mm one I/C of 100 A MCCB 20 KA+ 6 O/G 16 A MCB +1 O/G of 100 A HRC Fuse panel 415 V outdoor type

LT Power armoured UG cable as per specification

i) 1.1 kV class 4 X 95 Sq mm L T Aluminium Cable with glands/lugs/ferrules

ii) 1.1 kV class 4 X 25 Sq mm Copper Cable with glands/lugs/ferrules

iii) 1.1 kV class 4 X 10 Sq mm Copper Cable with glands/lugs/ferrules

STATION BATTERY & BATTERY CHARGER :

110V, 200AH Battery set (Plante/Grid/Nickel Cadmium Type) with accessories as per specification

Battery charger- suitable for '1 X 110 V, 200 AH, Battery set - 15 A float and 30 A boost (with float and boost battery charger as per technical specification).

LT DC Distribution panel ( Indoor) as per Technical specification comprising of Earth fault indicator, Indication circuit for AC main failure, 1 No 100A SFU for IC + 12 Nos, 32A SFU for OG etc,. compl...

1.1 kV Grade PVC Insulated armoured copper control cables of sizes,with Lugs/Ferrules/Gland as per technical specifications.

i) 19C x 2.5 Sq.mm

iii) 10C x 2.5 Sq.mm

vi) 4C x 6 Sq.mm

vii) 4C x 2.5 Sq.mm

viii) 2C x 6 Sq.mm

ix) 2C x 2.5 Sq.mm

11kV Switchgear

A) 11kV, 25kA, Metal Clad VCB Switchgear (1600A for Incomer and 1250A for feeders), outdoor type, each comprising of 2IC+12F+1BC+4CB+1AP (Remote Announciation cum Control panel) with ...

11KV U.G. Cable with the required cable terminations at both ends as per specifications.

i) One run of 11kV, XLPE 95 sq.mm Al., 3 core cable - (to be run for Auxiliary Transformers from 11KV switch...

ii) 11KV XLPE cable, 1000Sq. mm. Aluminium cable from 110/11KV transformers to 11KV Switchgear.

iii) 11KV XLPE cable, 240Sq. mm. Aluminium cable 3 Core to be run from 11KV Switchgear to 11kV take off DP Structure.

iv) Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable ( Indoor type )

v) Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable (Out door type)

vi)Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable ( Indoor type )

vii)Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable (Out door type)

viii)Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable ( Indoor type )

ix)Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable (Out door type)

Equipments for establishing SCADA Communication :

i) Remote Terminal Unit (RTU)

ii) Data Concentrator Unit (DCU)

iii) 2 kVA online UPS (230 V AC 1 phase 50 Hz) with Battery set

iv) Integration of RTU, DCU and UPS with field equipments

Cables -Laying

i) Current Cables-Copper Core with c/s 4.0 sq.mm Multistrand 4 Core

ii) Voltage Cables-Copper Core with c/s 2.5 sq.mm Multistrand 4 Core

iii) Signal Cables-armoured Copper Core with c/s 0.5 sq.mm Multi strand 10 Core

iv) Control Cables- Copper Core with c/s 1.5 sq.mm Multi strand 10 Core

v) Supply Cables-Copper Core with c/s 4.0 sq.mm Multi strand 3 Core for AC input to UPS & UPS to RTU,conforming to KPTCL specifications.

vi)Supply Cables-Copper Core with c/s 32.0 sq.mm Multi strand for Battery conforming to KPTCL specifications.

Note : Satellite Communication required will be arranged by SLDC.

STATION & YARD LIGHTING (OUTDOOR):

PVC Insulated Copper Control Cables : 1.1 KV PVC insulated Copper Control Cable with glands/Lugs/ Ferrules etc as per technical specification

Earth Mat formation :

i)Supplying and laying MS.Flat 75 x 12 mm flat welding and applying ACB paint to welded portion and covering with earth as per drawing/standard

ii)Supplying and Grounding of equipments with 75 x 12 mm G I flat and and connecting equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, dril...

ii)Supplying and Grounding of equipments with 50x6 mm G I flat and and connecting equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drillin...

iii))Supplying and Providing 40mm dia M.S Round rod 1.075 metre long earthmat spikes including heating, bending top 50/75 mm overlap flattening and making spike edge at one end driving into the earth...

iv)Supply and Errection of Grounding of equipment by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metre long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the...

v)Supplying & providing 450 mm dia 450 mm height 1.5" to 2" thick hume pipe collar (non pressure type) for earth pits including all lead and lifts etc.,

Check Survey and Towers Spotting.

Check survey using their own equipment for 110kV Plain terrain

1.The survey covers the scope as defined in Technical Specifications & As per volume -VI of Com...

ii.Conducting drone survey of Transmission Lines for collection of data along with Aerialinspection of EHV Line Corridor using LIADR method for measurement of Vertical, horizontal and ground clearance...

Stringing of ACSR Conductor without allowing the conductor to touch the ground and without damaging the conductor as per specifications.

Paving out conductor from anchor to anchor normally spaced at 5...

2. Lynx ACSR Conductor

3.7/3.15 mm GI Ground wire Plain Terrian for 110kV Line

Erection of Transmission 110kV Line Towers (including tower accessories etc., except GI angle, Barbed wire & Grounding materials) as per specifications.

1.The Bidders are required to quote the...

Erection of Transmission 220kV Line Towers (including tower accessories etc., except GI angle, Barbed wire & Grounding materials) as per specifications.

1.The Bidders are required to quote the...

Supplying and fixing AC devices:

i) Supplying and fixing GI angle iron 45 x 45x5mm (1Mtr length) with cleats, bolts nuts as per specification and fixing above 0.5 mts length each at inner and outer s...

ii) Supplying and fixing Barbed wire as per specification

Grounding of towers including cost of 40 mm dia 2.5 mm thick,class 'C' G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metre long, salt, charcoal, including excavation char...

Dismantling Portion:

Note : 1) The Released materials shall be transported to the nearest Major Works StoreS of KPTCL.

2)The rates quoted for releasing/dismantling shall also include the charges for ...

iii.Releasing & Restringing of Existing For:

WORK A: Lynx ACSR conductor of existing 110kV DC line.

WORK B: Lynx ACSR conductor for re-arrangement of 110kV line crossing.

WORK C: Lynx ACSR conductor ...

iv.Releasing & Restringing of Earth Wire for

Mandatory spares

Circuit Breaker (CB)

Closing coil with resistor (For one Complete Circuit Breaker)

a) for 145KV CB

Tripping coil with resistor (For one Complete Circuit Breaker)

a) for 145KV CB

Terminal Pad (For one Complete Circuit Breaker)

a) for 145KV CB

Terminal Connector (For one Complete Circuit Breaker)

a) for 145KV CB

SF6 Gas (40% of total gas Qty. for Sub-Station))

Copper Contract fingers male & female (For one Complete Isolator)

a) for 110KV Class

Terminal Connector (For one Complete Isolator)

a) for 110KV Class

Terminal Pad (For one Complete Isolator)

a) for 110KV Class

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (Royalty shall be...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height....

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm,aggregate cement rat...

Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, i...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5mm (heavy type)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be ...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus or minus1mm), with wall thickness 2.0 mm (plus or minus 0.2 mm), c...

30mm thick factory made polyvinyl chloride (PVC) door shutter made of a uPVC hollow section of size 60x30mm and wall thickness 2 mm (plus or minus 0.2 mm), with inbuilt decorative moulding edging on o...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...

Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with c...

Providing and fixing brass bib cock of approved quality 20 mm nominal bore

Providing and fixing PTMT stop cock of approved quality and colour. 20 mm nominal bore, 89 mm long, weighing not less than 88 g

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangment and making necessary holes for inlet, outlet and ov...

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

Providing and fixing Rainy dual capacity self-cleaning roof top rain water harvesting filter or equivalent filter of FL-500 specification suitable for a catchment area of about 500Sqm.

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000 ; 3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per...

Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...

SUBMERSIBLE CABLE

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest a...

PRESSURE GAUGE :

Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 100 mm

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm

NON - RETURN VALVE :

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm

ix) Control Panel BOARD-A:

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, A...

POWER CAPACITOR:

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning...

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Erection elctrification & Commissioning works of pumpsets :

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supp...

Erection of panel board & meter board Unit :

Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipmentsincluding provi...

Main connections:

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board un...

Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 100 x 75 x 65 mm

Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 135 x 75 x 65 mm

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth ...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying&fixingofPorcelainfusechannelwithcutoutonexisting wooden/panel using necessary nuts, bolts and washers. 100 A

Supplying of on load change over switches 4 poles,AC-23A Duty,415V,50Hz,AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 100 A

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying, fixing and wiring 0 to 1500amps CT operated AC analog type Ammeter With out CT

Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63A three phase 4wire whole current class-1 Accuracy Energy Meter.

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. And M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. And M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 15" Sweep (450mm)

Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operateon 230V 50Hz, AC Supply.

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ba...

Supplying wall mounting fan suitable to operate at single-phase 230v AC supply. 400 mm Sweep

Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary le...

Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit. The pit shoul...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm copper plate

GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 3 mm Copper strip

Grounding of equipment with 50 x 6 mm G.I. Flat and connecting equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and conne...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof, bathroom...

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 ...

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional c...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

Supplying PVC flexible conduit pipe ....mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using N...

Supplying And Fixing Metal Fan Box with Round Hook.

Supplying of recess mounting non integrated type LED down light 18W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT...

Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4ft - 36/40 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 8...

Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 2ft - 9/10 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. ...

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

Supplying and Fixing of ---- mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wa...

Supply of round/square recess/surface mounted rolling type LED Down light withLED square or round down light 5-6W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewire...

Extra length of GI pipe of class B 19mm dia for down rod.

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying, fixing andwiringResidualcurrentcircuitbreaker(RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 16A-25A 2 pole

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 63 A 4 pole

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50HzAC with latest micro controller based, digital read out of percentage leakage curr...

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Bell Push

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket

Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws.

Extra for supplying 4 mm thick white plastic plate andcovering for junction boxes of size ...... mm conduit using necessary machine screws. 80/90 mm.

Extra for supplying 4 mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using necessary machine screws.110 mm.

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Pendant Holder.

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Fixing all types and all capacities of fluorescent /falseceiling/ spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twintwisted PVC insulated wires, required No...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

Burnt Brick for cable Laying.

Providing M-Sand : Supplying and filling in plinth, foundations / UG cable work with approved M-sand including watering, ramming, consolidating and dressing. The rate includes the cost of material, la...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000 ; 3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per...

GALVANISED MILD STEEL TUBES:

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end...