GE(S)/M-52/2021-22

Amount

Providing and injecting chemical emulsion for post constructional antitermite along external wall where the apron is not provided using chemical emulsion @ 7.5 litre per Sqm of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc, complete all as specified and directed.

Providing chemical emulsion for post constructional antitermite along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified and directed.

M&L for treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors, complete all as specified and directed.

M&L for PCC 1:5:10 type E2 (using 40 mm graded crushed stone aggregates) as in sunken floors filling complete all as specified and directed.

M&L PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) levelling course on roof or sunken floor of toilet portion, rounded and chamfered on edges complete all as specified and directed.

M&L for RCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in projected slab to crumple joints to roof etc and the like, complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in kerbs mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L for Brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6 mtr mean radius built in CM (1:6) including demolition of existing brick workof any description, set in any mortar complete all as specified and directed.

Cutting chases in brick wall for pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintles, etc and making good exceeding 10cm but n. exc. 20cm in girth complete all as specified and directed.

M&L for form work to sides and soffitss of crumple joint slab and similar work n. exc. 200mm thick (horizontal or sloping) complete all as specified and directed.

S&F 40mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F 35mm thick H.D.F prelaminated (Wenga/Teak colour) moulded shutter 35 mm thick puf (poly urathane foam) insulation with minium density 40kg/cum filled in between two HDF sheets of thickness 3.2 mm both & border covered with 10 mm thick PVC sheet as per Drg No. CEPZ/TD-378/Sheet 1/1 dated 27/12/2011

Supply only 4mm thick aluminium composit panel for fixing to aluminium shutter and the like square with aluminium beadings and rubber gasket complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed.

S&F 125mm long aluminium handle, cast type, anodised complete all as specified and directed.

S&F brass mortice lock with 4 levers vertical type of 100mm size, complete all as specified and directed.

Supply only aluminium (extrueded aluminium section body) door closer hydraulically regulated, designation No 3 universal type, suitable for door shutters of 851 to 1000mm in width and weight 61 to 80 kg complete all as specified and directed.

S&F "as in repair" double action floor spring, hydraulically regulated, made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, complete all as specified and directed.

S&F powder coated (minimum thickness of powder coated 50 micron) aluminium frame work for doors, window, ventilators, partition walls with one or more rebates including joining cleats for fixing etc of size 101.6mmx44.45mmx3mm complete all as specified and directed.

S&F "as in repair" powder coated aluminium door shutter, aluminium section weighing not less than 0.75 Kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, 2 Nos handle 150mm long and two Nos 150mm long aluminium tower bolts in each shutter, hinges, anonised aluminium snap beading, fixed with screws, complete all as specified and directed.

Taking down existing aluminium door shutter and refixing to same opening after repairing easing and adjusting incl. replacement of damaged hinges, brass mortice lock, sheet glass, door closer, Elco panel 4mm thick, floor door spring, rubber neoprene packing, aluminium beading, glazing clips and SS screws etc complete all as specified and directed. Note:-Mortice lock, sheet glass, hudroulic door closer, floor spring and composit panel shall be measured and paid separately.

M&L for mild steel TMT bars 6-8 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S&F rolled mild steel sections as in framinig for cladding glazing and the like using angles/channels as per site requirement fixed with using butt welded joints etc incl necessary dismantling of existing iron work complete all as specified and directed.

M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (ISI marked) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall upto 10m height fixed with self tapping screws etc including dismantling of existing plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

M&L (EXCEPT SHEET) Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (ISI marked) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall upto 10m height, fixed with self tapping screws etc including dismantling of existing plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings and re-fixing at the same location after making necessary repair as required complete all as specified and directed.

S&F "as in repair 2mm thick fibre glass reinforced transluscent corrugated sheeting with two corrugations side lap fixed with 'L' or 'J' type or cranked hook bolts in roof etc, including dismantling of existing sheeting, any gauge, thickness, complete all as specified and directed.

M&L plain galvanised iron steel sheet 1.00mm thick (ISI marked) made to shape as per site requirements at junction of wall cladding and annexure to hangers slab by taking out carefully existing self tapping screws, inserted the sheet 100mm inside wall cladding and refixing new self tapping screws incl. joint tapping etc complete all as specified and directed.

M&L for plugging holes for galvalume roof sheet with self tapping screws and washers at roof hanger upto 10m height complete all as specified and directed.

M&L for collapsible steel gates, top hung consisting of channel pickets, pivoted flat bars top and bottom runners, brass handles etc, as specified in clause no 10.24 of SSR Part-II (2009) erected in position and securing runners with holdfasts and brackets, including taking down existing steel gate, complete all as specified and directed.

M&L "as in repair" for rain water pipe of any size and pattern all as per existing pattern made up of 0.50mm thick galvalume sheet including all fittings, stack clamps fixed to wall including taking down existing rain water pipes complete all as specified and directed.

Fixing only in repair, rain water pipe made up of 0.50mm thick galvalume sheet (any size and pattern) including all fittings, cleaning and refixing complete all as specified and directed.

S&F "as in repair in patches 4mm thick Non asbestos fibre cement building boards fixed to existing timber/GI/Aluminium framework with screws as in ceiling including preparation of new surface and applying three coats of white wash complete all as specified and directed.

Cutting out care fully existing PCC 50mmx80mm size at junction of wall cladding and roof slab with diamond cutter and filled the top 50mm with paving bitumen 85/25 grade over 30mm thick appoxy grout incl. watering, cleaning etc complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:3 on brick work or concrete surface of sunken floor, finished even and smooth mixing and including WPC @ 0.200 ltr per 50 Kg of cement, complete all as specified and directed.

M&L for bitumen hot blown any grade, applied hot, two coats to concrete / plastered surfaces at the rate of 1.5 Kg per Sqm per coat and applying polythene film black 50 micron, complete for sunken floor slab and embedded in side wall / covered fillet, complete all as specified and directed.

S&F in repair for Gypsum ceiling board 595mmx595mmx9.5mm including replacement of unserviceable line wire with 4mm dia including repairing/realignment of grid of any description complete all as specified and directed.

M&L for 25mm thick plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in sub base of floors for laying floor finish complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate in plinth protection. Concrete shall be laid in alternate bays n.exc 3 m in length finished fair and even including provision of joints of 6 mm wide and 10 mm deep along the wall and bays filled with bitumen mastic (1:3), including demolition of existing plinth protection of any description and removal of debries complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:6 for laying floor finishes, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300mm x 450mm x 7mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including rendering 10mm thick in CM 1:4 and finished rough to receive tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 10mm thick vitrified ceramic 'light shade' colour tile (Square or Rectangular), polished, area of each tile not exc 0.36 Sqm (Joint free) as in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:6 and finished rough, including dismantling floor, hearth or wall tiling complete all as specified and directed.

M&L for 10mm thick vitrified ceramic 'light shade' colour tile (Square or Rectangular), polished, area of each tile not exc 0.36 Sqm (Joint free) as on vertical surfaces such as skirting/dado/risers of step etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including rendering 10mm thick in CM 1:4 and finished rough to receive tiles complete all as specified and directed.

M&L for "repair work" in marble work to match the existing marble machine cut as in risers treads of steps bull nosed on front face in treads, laid over and including 15mm thick screed in CM 1:4 including pointing with white cement (1:2) using marble dust with admixture of pigment to match the marble shade including rounding the exposed edges full round, including grinding, polishing etc and including taking out old brocken pieces of marble of any description or thickness complete all as specified and directed.

M&L for 10mm thick rendering or plastering work in CM 1:3 on fascia or edging of chajjas, ceiling and roof projections etc. including taking out peeled off existing plaster / concrete including roughening old concrete surface and making the line in true shape and finishing the surface without using extra cement, complete all as specified and directed.

M&L for 10mm thick rendering on faces of brick work or concrete surfaces of walls in cement mortar 1:6, finished even and smooth without using extra cement including taking down existing cement plaster on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 15mm thick rendering in two layers (5mm thick in CM 1:4 over 10mm thick in CM 1:6) on brick work and concrete surfaces of wall, finished the surface even and smooth without using extra cement, mixing and including WPC @ 200ml/bag of cement, including taking down existing cement plaster on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for raking out joints/ pointing in cement mortar laid flat, in floor, roof and to random rubble or polygonal rubble uncoursed or brought up to courses stone masonry built in cement mortar of any description complete all as specified and directed. (NOTE:- The quoted rates include for racking or cutting out joints and decayed mortar etc, not less than 12mm deep, washing the joints, removing rubbish off the premises, and keeping the surface to be pointed wet for two days prior to re-pointing).

M&L for flush pointing in cement mortar 1:3 to brick tiles laid flat at roof and random rubble masonry, uncoursed or brought upto courses of any description complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old surfaces of ceiling including washing down, rubbing, brooming down with wire brush scrapping down smoke, roots, moulds, salts and treading oil and greasy spots and applying one coat of white wash, complete all as specified and directed.

M&L for preparation of old surfaces of walls of any description including washing down, rubbing, brooming down with wire brush, scrapping down smoke, roots, moulds, salts and treading oil and greasy spots, and applying one coat of washable distamper, white or tinted complete all as specified and directed.

M&L for additional one coat of washable distamper, on walls complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and making the surfaces smooth by applying 2mm thick wall care putty and applying two coats of oil emulsion distemper, complete all as specified and directed.

M&L for preparation of old surfaces of walls of any description including washing down, rubbing, brooming down with wire brush, scrapping down smoke, roots, moulds, salts and treading oil and greasy spots, and applying one coat of cement based paint, white or tinted, complete all as specified and directed.

M&L for preparation of newly plastered surface of external wall and applying two coats of cement base paint over a coat of alkali resistant primer including curing, complete all as specified and directed.

M&L for preparation of old surfaces of walls of any description including washing down, rubbing, brooming down with wire brush, scrapping down smoke, roots, moulds, salts and treading oil and greasy spots, and applying one coat of exterior weather coat paint, white or tinted, complete all as specified and directed.

M&L for additional one coat of exterior weather coat paint, white or tinted, on walls complete all as specified and directed.

Supply only 4.8mm thick sheet glass, ordinary quality covered with solar control film 25 micron reflective type sticked to glass panes fitted with aluminium beading and rubber gasket in aluminium frame in square or rectangular n. exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F "as in repair" 8mm thick transparent toughened sheet glass, with rubber packing fixed to metal frame including hacking out old glass top floor of ATC building complete all as specified and directed.

M&L for preparation of old surfaces of steel & iron work of any description exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for additional one coat of synthetic enamel paint on steel or wood surfaces complete all as specified and directed.

M&L for preparation of old surfaces of wood & wooden of any description exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tank of capacity 1000 Litres, three layers (cylindrical vertical with closed top), hoisted and fixed in position including 20mm dia PVC ball valve, high pressure with polythene float complete all as specified in SSR Part-1, including dismantling of existing PVC water tank of any capacity complete all as specified and directed.

M&L for 15mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, including taking up or down steel tubing and connections, complete all as specified and directed.

M&L for 20mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, including taking up or down steel tubing and connections, complete all as specified and directed.

S&F "as in repair" 15mm bore angular stop cock, fancy type with flange cast copper alloy (ISI Marked), chromium plated screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.

S&F "as in repair" 15mm bore stop valve, cast copper alloy (ISI Marked), fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.

S&F "as in repair" gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed suitable for 20mm bore pipe complete all as specified and directed.

S&F "as in repair" 15mm bore Pillar tap, cast copper alloy, fancy type, with capston head, chromium plated, screwed down, high pressure with or without letters, hot or cold with long screwed shank and fly nuts, screwed for iron pipe, complete all as specified and directed.

S&F "as in repair" 15mm bore bib tap with flange, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F "as in repair" chromium plated brass towel ring incl. SS screws and rawl plugs complete all as specified and directed.

S&F "as in repair" chromium plated brass health foucet (with 1.5mtr long PVC tube) fixed to angular stop cock and complete wall hanging arrangement, complete all as specified and directed.

S&F in replacement corner glass shelf assembly, quarter round with CP brass bracket, complete all as specified and directed.

S&F "as in repair" PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F "as in repair" PVC flushing cistern of 10 Ltrs capacity including PVC inlet and outlet connections, brackets, PVC flush pipe with bend 32mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC, complete all as specified and directed.

S&F "as in repair" Viterous china urinals, half stall type, incl CP coupling, waste pipe and all necessary fittings, complete all as specified and directed.

S&F "as in repair" Vitreous china wash basin, white flat back of size 550mm x 400mm including 32mm size CP waste coupling full thread and 32mm dia PVC waste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and directed.

S&F "as in repair" Vitreous china wash down water closet pan (pedestal pattern), white complete including fixing to trap including PVC seat cover white, flat bottom with hinging device for pedestal pan and connecting etc, complete all as specified and directed.

S&F "as in repair" Vitreous china squatting pan of 'Orissa pattern' of size 580mm x 440mm, white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests of any pattern (including fixing of flush pipe) and connecting etc. including provision of cement concrete bedding, complete all as specified and directed.

S&F "as in repair" 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid or fixed in trenches / floors / walls, complete all as specified and directed.

S&F "as in repair" 110mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and directed.

S&F "as in repair" 100mm bore cast iron floor trap with stainless steel CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed.

S&F "as in repair" 75mm bore cast iron floor trap with stainless steel CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed.

S&F "as in repair" 100mm bore Cl soil pipe (sand cast) in any length with ears fixed with cement joints, laid in trenches or in floors, complete all as specified and directed.

S&F "as in repair" 75mm bore Cl waste pipe (sand cast) in any length with ears, fixed with cement joints, laid in trenches or in floors, complete all as specified and directed.

S&F "as in repair" Cl bends (any radius) for soil pipes 100mm bore diminishing pieces or tapers on walls with oval access doors, complete all as specified and directed.

S&F "as in repair" Cl bends (any radius) for soil pipes 75mm bore diminishing pieces or tapers on walls with oval access doors, complete all as specified and directed.

S&F "as in repair" stack clamps made out of 50x5mm flat iron and 16mm dia round iron stays, including bolts and nuts securing ends of stays to wall or roof for 100mm dia CI pipe complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 Sqm but not exc 4.0 Sqm each (without taking off shutters from the frame), complete all as specified and directed.

Taking down chowkhats or frames not exc 1.5 Sqm each with shutter (without taking off shutters from the frame), complete all as specified and directed.

Taking down shutter only of any description exc 1.00 Sqm but n. exc. 2 Sqm each complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

M/S SEVENUP

M. C. ENTERPRISES

Bidder Name

WALIA ENTERPRISES

M/S SEVENUP

M. C. ENTERPRISES