Various Works to be carried out at Govt. 500 Bedded Paediatric Hospital, Bemina, Srinagar.

Amount

Laying of stone soling, properly handpicked consolidating, leveling and all leads of carriages up to site of work

Placing in position the RCC cement concrete of specified grade of mix in M20 mix with nominal size of stone aggregate 40 mm thick crushed excluding cost of centering and shuttering

BASE: Steel reinforcement for R.C.C work TMT bars of grade Fe-500 and diameter 16mm main bars & 12mm temperature bars

Design & fabrication of DG set shed of size 20x8 feet & shall be fabricated by using structural steel of various sizes & sorts and shall withstand the snow load of 50 kgs/ft2.

P/F Percolated galvalume profile sheets 0.50 mm TCT having a crest height of 28-32 mm at 195 mm pitch and effective width of 975-1000 mm and length to suite requirement to purlins using self-drilling and self-tapping fasteners of reputed make with purlin sheet using self drilling and self tapping fasteners and fixing flashings, valleys and ridges of color coated galvalume plain sheet of reputed make complete as directed at site of work.

Providing & Fixing of 8 Gauge GI chain link fencing. The job includes Providing and fixing of 10 mm dia, 40mm long nuts ,bolts & Washers and welding as required .

Closing of copper pipes in NICU ward by way of P/F of 12 mm thick both side laminated MDF board of size 10x1.5 feet. The box shall be fitted with all hardware items.

Closing of concrete cut outs by way of providing necessary civil material including steel bars, shuttering , etc . The job shall get certified by concerned civil site engineer.

Realignment of 150 mm & 100 mm dia MS pipes of fire fighting system by way of cutting of already laid pipes which are hindering surface drainage system. The job includes fitting of same pipes as per site requirement. Further the job incudes P/F of 150 mm & 100 mm MS bends (4 nos each).

SITC of 3 hp Gear type Oil transfer Pump (1" x 1") complete with electric motor,starter, wiring, etc as per technical specification s of Annexure B

SITC of Mild Steel class ‘C’ ERW pipes of following diameters with fittings like tees, elbows, bends, junctions, unions, flanges etc. clamps structural supports, wooden pedestals as per site requirements including application of anticorrosive paint of approved shade over a coat of primer as per technical specification s of Annexure B.

50mm (50mm thick insulation)

40mm (25mm thick insulation)

25mm (25mm thick insulation)

SITC of Aluminium laminated puff insulation/ Glass wool/ Rockwool/ Mineral wool Pipe Section) insulation of following diameters with GI cladding if required

SITC of GSS sheet metal ducts 0.63 mm (24 gauge) complete with neoprene rubber gaskets, elbows, splitters, vanes, hangers, supports etc.

SITC of 400 mm insulated butterfly valve with lever of PN 1.6 for main header of central heating pile line

Providing & fixing of 16 mm MS plate for base of chimney of hot water generator of size 2ft x 2ft (3 nos)

SITC of oxygen pressure gauge meter (0-7 bars) which shall be fitted on already laid oxygen pipe line

SITC of vacuum pressure gauge meter (0-100 bars) along with ball valve

SITC of self-priming motor coupled 5 HP sludge pumping unit with 10 m head , 18 LPS. The job shall be P/F of suction/delivery pipes, foot valve, butterfly valve as per site requirement.

Re fixing of radiators by way of P/F of powder coated Al hanger clips, defective nuts, bolts, etc

Complete electrification of AHU room at attic by way of P/F of 15 W led lights with switches & enclosures (30 no) & complete wiring in 1.5 mm2. The job includes P/F of suitable MCB’s as per site requirement

SITC of fully automatic control panel for manifolds at different locations of the hospital premises. The job includes P/F of power supply to control panel from nearby source .

Supply, installation, testing & commissioning of oxygen BS type gas outlets along with humidifier bottle with 12mm copper pipe with 12 mm isolation valve

12 MM cement plaster in 1:6 mix incl: all leads of carriage upto site of work and curing complete.

P/F in position Aluminum work for doors, windows, ventilators etc. with extruded built up sections/appropriate Z-section/tubular section and other sections of app: make confirming to IS:733 and IS:1285 fixed with rowel plugs and screws incl: necessary screws, filling up of gaps and junctions at top bottom and sides with required neoprene felts etc, glazing and panels to be paid separately for fixed portion powder coated aluminum, complete job at site of work Powder coated Aluminum(minimum thickness of powder coated 50 microns) with floating glass panes of 4.0 mm thickness (weight not less than 10.00 Kg/sqm).

Providing and fixing Ist quality ceramic glazed tiles conforming to IS : 13753 of minimum thickness 5mm of approved make like Nitco, orient, somany kajaria or equivalent make in all colour, shades except begundy, bottle green, black of any size in risers, skirting walls etc over 12mm thick bed of cement mortar 1:3 and jointed with grey cement slurry @ 3.3 kgs per sqm.including pointing in white cement with pigment of matching shade complete.

Providing and fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufactures) of Ist quality conforming to IS: 13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as white, Ivory, Grey, Fume Red, Brown laid on 20mm thick bed of cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc.

Brick work with common burnt clay (non modular)bricks of class designation 7.5 in foundation and plinth incl:curing : 1:6 cement mortar with all leads of carriages upto site of work

Providing and fixing soil, waste and vent pipes: PVC for bath room

100 mm dia

50 mm dia

Providing and fixing of floor trap 100X75mm PVC

Providing and fixing G.I "" B Class'' pipes complete with G.I fittings including trenching and refilling etc. (external work)

15mm dia

Providing and fixing of brass stop cock of approved quality

15 mm dia Medium

Providing and fixing G.I Union in G.I pipe including cutting and threading the pipe and making long screws etc. complete

15mm dia

Providing and fixing of CP brass double hole adjustable sink mixer pillar tap of apprved quality and make.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 15 mm nominal bore

Providing and fixing C.P. brass angle valve of approved make conforming to IS : 8931. 15mm nominal bore

Providing and fixing water closet squatting pan (Indian Type) W.C pan with 100 mm sand cast iron/PVC P of S trap with PVC low level flushing cistern with manually controlled device(handle lever) on forming to IS:7231 with all fittings and fixtures complete job. 10 litre full flush capacity.

Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than300 gms.

Providing and fixing PTMT soap dish holder having length of 138 mm , breadth 102mm, hight 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 100 mm iron grating for gully, floor or Nahani trap.

Providing and fixing of gysers of capacity of 50 lit incl. cost of gyser bolts, 3 pin top etc. of reputed make with warranty of atleast 6 months complete

Complete electrification of the bathroom by way of providing 2 No. lighting points with switches and 1 No heating point geyser including the 2.5sqmm wire for heating load and 1.5 sqmm for lighting load. The Job includes providing 32 A MCB (2 No.) for lighting and heating

Providing and fixing of a multilayer water storage tank of capacity of 1000 liter , 100% UV stabilized, Threaded lid with extra insert lid – For algae formation protection made up of 100% virgin material and Food Grade material (FDA), for hygienic water.

Providing & fixing of circuit breakers for AHU’s & industrial exhaust fans of following ratings

16 A TP MCB with enclosure

32 A TP MCB with enclosure

63 A TPN MCB with enclosure

Supply, installation, testing & commissioning of 70 sq mm 3.5 core armored Al cable for fire fighting attic pumps

Supply, installation, testing & commissioning of LT panel in 16 SWG power coated sheet with volt meter, ampere meter, neon indicators for fire fighting attic pumps with following specifications 125 A MCCB with 50 KA breaking capacity as main incomer (01 no) 125 A Al busbar 63 A MCCB with 50 KA breaking capacity as out comer (02 no) 32 A MCB with 50 KA breaking capacity as out comer (01 no) 16 A MCB with 50 KA breaking capacity as out comer (02 no)

Providing & fixing of ACP of thickness 3 m including all necessary frame work for covering of copper pipes outer wall of main hospital building

Supply installation testing and commissioning of 80mm B class GI pipe along with fittings as per site requirement for portable water to hospital building

Supply installation, testing and commisioning of electronic, self balancing, pressure independent type

Supply, Installation testing and commissioning of circulat type inline fan of following capacities of approved makes (cost be inclusive of speed regulator, gravity damper)

100-400 CFM, 5-7 mm SP WG with single phase motor

1000 CFM, 5-7 mm SP WG with single phase motor

GOOD LUCK TRADERS