Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.5 LAccepted-AOC RAWALPORA WANABAL PATI YAYIL POST OFFICE SANAT NAGAR SRINAGAR 190005 J K | SRINAGAR | JAMMU AND KASHMIR | 190005 | L1 | Accepted-AOC AOC | |
| 2 | L2₹24.0 L+₹1.1 L (4.72%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹24.9 L+₹2.0 L (8.68%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹27.7 L+₹4.8 L (21.1%)Rejected-Finance R O KHREW TEH PAMPORE DISTT PULWAMA PIN 191103 J K | PULWAMA | JAMMU AND KASHMIR | 191103 | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹29.4 L+₹6.5 L (28.4%)Rejected-Finance | L5 | Rejected-Finance Other than L1 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
5 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE, HQ 134 Wks Engrs
HQ 134 Wks Engrs PIN 914134 c/o 56 APO
REPAIR TO DRAINS, PCC PATH, FENCING, HARD STANDING AND OTHER MISC B/R WORKS AT KHUNMOH GRN UNDER GE 861 EWS
2022_MES_550601_1
134 WE-43(T)/2022-23
Open Tender
Civil Works - Others
Item Rate
180 days
Srinagar
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE 861 EWS
₹80,000
Yes
28 Oct 2022
7 Sept 2022
7 Oct 2022
7 Sept 2022
5 Oct 2022
22 Sept 2022
8 Sept 2022 - 14 Sept 2022
Amount
Demolition of brick work or stone masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate) in any position, complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specially provided, complete all as specified and directed.
Taking down cement plaster from brick or concrete or stone surfaces including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in CM 1:6, complete all as specified and directed.
All as per srl item No. 6.00 here-in-above but except stones.
M&L for flush pointing to random / squared rubble masonry in CM 1:3, complete all as specified and directed.
M&L for brick work with sub class 'B' modular bricks straight or curved on plan exceeding 6 metre mean radius, built in cement mortar 1:6, complete all as specified and directed.
All as per srl item No. 9.00 here-in-above but except bricks.
M&L for 15mm thick rendering in CM 1:4 on fair faces brick work or concrete surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:6 on fair faces brick work or concrete surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed.
Demolition of concrete in ground floors and pavings not exc 15cm thickness (below or above ground level), complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6, type C-2 (using 40mm graded crushed stone aggregates) as in plinth protection, laid in alternate ways and including joints filling with sealing compound Grade "A", finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in grouting of andgle posts, pillar, coping, plinth courses, parapets and raillings etc, including necessary form work, complete all as specified and directed.
M&L for PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in surfaces channel and drains, complete all as specified and directed.
M&L for precast cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in cover slab for MH/ septic tank etc and set in CM 1:4, complete all as specified and directed.
M&L in repair precast cement concrete RCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) louvers and jalliers, 40mm thick (measured solid) including precast pillars of size 125mm x 125mm in section all moulding, complete all as specified and directed.
M&L for RCC M-25 Grade (Design Mix) as in beams, cantilevers, bressumers, lintels over 1.5 mtr clear span, beam supported on wall etc, complete all as specified and directed.
M&L for RCC M-25 Grade (Design Mix) as in slab supported on walls, beams and columns in floor, roofs, landings, balconies, canopies, deck slabs, culverets supperted on walls etc, complete all as specified and directed.
Formwork to edges of rough finished concrete surfaces of beams / band in wall and similar work, complete all as specified and directed.
Formwork to rough finished surfaces of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.
M&L for TMT mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed.
M&L for TMT mild steel bars 5mm dia and over upto and including 10mm dia, cut to length, bent to shape as required as in stirrups, spacers and binders, complete all as specified and directed.
Dismantling structural steel work in cluding doors, gates but excluding framed truss etc, complete all as specified and directed.
M&L for mild steel angle iron work in post, struts in fencing including cutting tops to shape as required, drilling holes, notching for wire, including welding etc, confirming to Fe-290 Gde E-165, complete all as specified and directed.
M&L for mild steel framed work such as grills, gratings etc, with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, confirming to Fe-290 Gde E-165, complete all as specified and directed.
M&L for mild steel work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, drilled for fixing of steel sheeting or other covering, hanging or sliding with and including either hooks and hinges or steel hanging door fittings and also fastening and fixing, complete all as specified and directed.
M&L for PCC 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregate) as in flooring, finished the surface even and fair, complete all as specified and directed.
M&L for non-skid coloured ceramic tiles 7-8mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm each as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including 15mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed.
M&L for glazed ceramic tiles of size 350mm x 250mm x 7mm / 450mm x 350mm x 7mm thick as on vertical surface, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile, fixed over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.
S&F in repair galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed, complete all as specified and directed. Note :- Eeach line wire to be measured.
M&L for 75mm thick PCC 1:3:6, type C-2 (using 40mm graded crushed stone aggregates) as in sub base, floor etc, finished the surface fair and even without using extra cement, complete all as specified and directed.
M&L for chequred cement concrete tiles, glossy finished of size 30cm x 30cm x 25mm thick with cement and pigment, set, jointed and pointed in neat cement slurry as in floors, laid over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed.
M&L for 100mm thick PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregates) as in hardstanding, floors etc, finished the surface fair and even without using extra cement, complete all as specified and directed.
Dismantling plain or corrugated steel sheeting of any gauge and thickness including Nainital or similar pattern roof coverings, complete all as specified and directed.
S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, with grade of zinc coating 275, fixed with 'L' or 'J' type hooks or cranked hooks, complete all as specified and directed.
S&F 0.63mm thick plain, galvanised, mild steel sheeting as in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed.
M&L for 60mm thick machine pressed precast concrete interlocking paver block of any shape and size, confirming to IS 15658-2006, M-35 Grade with grey cement and pigment, complete all as specified and directed.
M&L for sand filling under floors or in foundation including watering and consolidation, complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint on new steel roof surfaces of any description over and including preparing new zinc (or galvanised) surfaces to receive painting by coating with modrate solution including washing and cleaning, complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying three coats of white wash, complete all as specified and directed.
M&L for preparation of new palstered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of chalk white primer, complete all as specified and directed.
M&L for preparation of old palstered or unplastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.
M&L for preparation of new palstered surfaces of walls and applying two coats of oil bound distemper over a coat of wall primer, complete all as specified and directed.
Adil Mohammad Dijoo
M/S MOHAMMAD SHABAN AND CO
M/S SHEIKH FEROOZ AHMAD
BHAT CONSTRUCTIONS AND BUILFERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .