CONSTRUCTION OF CC ROAD MSH 16 TO DAUDPUR TO SELU PARALI CH.1/00-1/500KM ODR-98 TQ Parali

Clearing and grubbing road land Including uprooting rank vegetation, grass, bushes, shru trees girth up 300 mm, removal stumps dissal unserviceable materials and shrubs, saplings and stacking of serviceable material to be used or auctiores cut earlier and dispometres Including removal and disposal of top organic soil not exceeding 150 mm In thickness. MORTH 201 SSR OF 2022-23 ITEM NO. 2.09 & PAGE NO.23

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at lead of 1000 metres, stacking serviceable and unserviceable materials separately etc. complete. ng at designated locations and disposal of dismantled materials up to a MORTH 202 SSR OF 2022-23 ITEM NO. 3.11 & PAGE NO.28

Supplying soft murum at the road site, including conveying and stacking complete. NORTH 408 SSR OF 2022-23 ITEM NO. 2.29 (b) & PAGE NO.25

Spreading hard murum/soft murrum/gravel or kankar for side width complete MORTH 408 SSR OF 2022-23 ITEM NO. 2.3 & PAGE NO.25

Providing and laying Cast in situ/Ready Mix cement concrete In M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR OF 2022-23 ITEM NO. 24.01 & PAGE NO.175

Scartfying the existing granular road surface to a depth of 50 mm by manual means and disposal of scariñed material within all lifts and leads upto 1000 metres.SSR OF 2022-23 ITEM NO. 3.09 & PAGE NO.28

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 Plant Mix Method and Grading - I Material MORTH 401 SSR OF 2022-23 ITEM NO. 3,01 & PAGE NO.27

Providing ng and laying in-situ M30 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate conforming to IS 383, using fine & coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver, compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cop with depth of 75nt Mortar 1:8 @ 0.6m X 0.6m centre to centre, admeasuring 80 mm at and 75mm and maintaining the same through out curing period by any other method approved by Engineer-in-charge MORTH 602 SSR OF 2022-23 ITEM NO. 5.01 & PAGE NO.37

Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm In concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete includinger equent widening of the groove 8 to 10 wide at tup having depth of 15 mm, as by Engineer subsequent incharge. MORTH 602.6.3 & 602.6.4 SSR OF 2022-23 ITEM NO. 5.17 & PAGE NO.43

Providing and fixing of retro-reflectorised Informatory sign board rectangular/Square In shape having area less than 0.9 square meter made out of 2mm aluminum sheet bonded with white retro reflective sheeting of Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retorefictive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side back suppon with two coats of its of grey stove enamel paint & supported on one one no. mild ste steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coals wel as per approved having alternate black and white bands of 25 cm width including GI fixures and transportation etc.Complete.The nut bolts of board with angle Iron post/supporting structure e after fixing at site has to be electrically welded. Class B (Type B (Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer & authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. MORTH 801 SSR OF 2022-23 ITEM NO, 6.33(a) & PAGE NO.57

Please Enable Macros to View BoQ information