Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹18.9 LAccepted-AOC | L-1 | Accepted-AOC Accepted being L-1 | |
| 2 | L-2₹21.8 L+₹2.8 L (14.9%)Rejected-AOC | L-2 | Rejected-AOC Not accepted being L-2 | |
| 3 | L-3₹22.2 L+₹3.3 L (17.2%)Rejected-AOC R O ZANGSTI LEH LADAKH 194101 | LEH | LEH | LADAKH | 194101 | L-3 | Rejected-AOC Not accepted being L-3 | |
| 4 | L-4₹22.8 L+₹3.8 L (20.3%)Rejected-AOC R O Y K PURA QAZIGUND ANANTNAG 192221 J K | ANANTNAG | JAMMU AND KASHMIR | 192221 | L-4 | Rejected-AOC Not accepted being L-4 | |
| 5 | L-5₹23.1 L+₹4.1 L (21.8%)Rejected-AOC | L-5 | Rejected-AOC Not accepted being L-5 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
29 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Partapur
GE Partapur
Provn of toilet cum Bathroom block for Loop Battalion at Base Camp-I under GE Partapur
2022_MES_562174_1
GE/P-66/2022-23
Open Tender
Civil Works
Works
183 days
GE Partapur
As per NIT and Tender documents
8 documents required · 8 mandatory
₹500
Yes
GE Partapur
₹40,000
Yes
12 Jan 2023
9 Nov 2022
1 Dec 2022
9 Nov 2022
29 Nov 2022
23 Nov 2022
11 Nov 2022 - 15 Nov 2022
Amount
M&L for surface excavation n.exc. (not exceeding) 30cm deep and averaging 15cm deep and getting out in hard/dense soil.
M&L for excavation in trenches, n.exc. 1.5m wide and n.exc. 1.5m in depth; for foundations, etc. or shafts, wells, cesspits, manholes, pier holes, etc. n.exc. 10sqm on plan and n.exc. 1.5m in depth and getting out in hard/dense soil.
Removing of hard soil excavated material n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point and complete.
Returnig, filling in, incl spreading, leveling watering and well ramming in layers not exc 25 cm thick above or below ground level complete all as specified and as directed
M&L Hardcore of guage exc. 63mm but not exceeding 100mm, deposited, with broken stone or boulders, spread and levelled in layers n.exc. 15cm thick, watered and rolled / rammed to a true surface.
M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete.
RCC design mix M-30 (20mm graded agg) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete
RCC design mix M-30 in columns, pillars, piers, posts and struts
RCC design mix M-30 in slab supported on walls, beams and column in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
RCC design mix M-30 in beams/lintels supported on walls, beams and column in floors, roofs, landings, balconies, canopies, complete
M&L for TMT bars mild steel bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D.
M&L for TMT bars mild steel bars, 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with claps quality conforming to Fe-500D
M&L for Pre-cast cement concrete Type C1, 1:3:6 (20mm stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in CM 1:6, complete.
M&L for providing precast cement concrete Type C1, 1:3:6 (20mm stone aggregate) solid building blocks or slabs 10 cm thick (with plain or interlocking joints as directed) setting in CM 1:6 complete, in walls.
Providing cement concrete type C-1, 1:3:6 ( using 20mm graded stone aggregate), 50 mm thick as in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays and in between the walling and plinth protection, filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand ( all by weight).
M&L for rendering 10mm thick on fair faces of brick work or concrete surface finished even and smooth (without using extra cement) in CM 1:6
M&L for rendering 15mm thick on fair faces of brick work or concrete surface finished even and smooth (without using extra cement) in CM 1:4 including with using watre proofing compound.
M&L for rendering on Roof Top 20mm thick on fair faces of brick work or concrete surface finished even and smooth (without using extra cement) in CM 1:4 including with using water proofing compound.
M&L for rendering 5mm thick on fair faces of brick work or concrete surface finished even and smooth (without using extra cement) in CM 1:3 on ceiling.
M&L for 100mm thick Cement Concrete 1:4:8 type D2 using (40mm graded aggregate as in sub base.
M&L for 40mm thick Cement Concrete 1:2:4 type B1, (20 mm graded aggregate) as in flooring
M&L for Non Skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl Screed bed or bedding layer of mortar 15mm thick in Cement Mortar 1:6 for laying floor finishes.
M&L for Glazed ceramic coloured tiles in vertical surfaces 300 x 200 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match.
S & F solid PVC door frame of size 50X47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification and directed.
S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' chanel having a PVC sheet strip of 20mm width stuck in side with solvent cement for stiles and plain colour PVC sheeets for top rail locj rail and bottom raiol in either side and as gap insert for top rail and bottom rail, panelling ofg plain colour PVC sheets to be foitted in the MS frame wwelded/sealed to the stiles and rails with solvent cement all as specified and shown on drg.
S&F plain, solid, straight chowkats of second class hard wood and frames, wrough, framed rebated on the solid, rounded or chemfered, put together with glue pinned at joints
S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type both sides complete all as specified
S&F 150mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed.
S&F 250 mm Aluminium alloy, anodised, sliding door boltwith hasp and stapple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed
S & F butt hinges 100mm, medium weight, cold rolled mild steel and fixed.
S & F 100mm Extruded aluminium alloy handles, fabricated type, anodised
S&F 30cm long hold fast conforming to Fe.290. Gde-E-165 of Sectiion 25x6mm
S & F 4.00mm sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.5 sq.m in each pane.
S&F wash down water closet (Pedestal Pattern) (excluding flushing cistern and flush pipe) white including connection to drain and to flushing pipe, antisyphonage pipe etc, flush pipes of size 630 x 450 mm with integral foot rest to pedestal pan, including all joints, complete assembled all as specified and directed.
S&F PVC valveless, syphonic action type 10.00 ltrs flushing cistern, low level white with inlet, ball valve, float and handle including brackets.
S&F PVC Connections 15mm size with PTMT nuts of length 450mm
S&F 15mm bore bib taps cast copper alloy with crutch or butterfly handle screwed down ,screwed for iron pipe or brass ferrule complete and fixed.
S&F 15mm Stop valves, fency type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for uniuns and fixed
S&F 15mm bore fancy type pillar taps cast copper alloy with capsta heads, chromium plated screwed down high pressure, with or without lettered "Hot or Cold" with long screwed for iron pipe complete and fixed.
S&F 25mm Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.
S&F Towel rail 450mm long PTMT fixed with and including cromium plated and wooden plastic clits complete
Supply and Installeed puff water tank capacity 500 Ltrs insulated cylindrical vertical type double layer duly fileed with glass wool with closed top hoisted and to resist in temprature (-) 30 degree to (+) 35 degree celcius fixed in position with all fittings over PCC plate from complete all as specifid.
M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete.
M&L for form work to edges of concrete flats, treads breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n.exc. 20cm wide and sides of RCC/PCC bands in walls, horizontal of sloping and similar work exc 10cm but n.exc 20cm wide for rough finished surface of concrete.
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticle or to batter for rough finished surfaces of concrete flat.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.
M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash.
M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paints.
M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling.
M&L for preparation of newly wooden surfaces and applying two coats of synthetic enamel paint over a coat of primer.
S&F vitrous china wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets.
S & F Urban desires bathroom cabinet with mirror plastic strong and heavy new look six shelves storages organiser and shelf 22" x16" white make in india as per specified by EIC.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in trenches or in floor 110mm bore
PVC bend any radius size 110mm bore with access door
M&L PVC(SWR) floor trap plain with gratings including jointing to waste pipes wiith solvent cement size 75mm bore.
M&L for 20mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:4complete all as specified and directed.
M&L 100mm thick plain cment concrete 1:4:8 type B-2 using 40mm graded crushed stone aggregate) as in floor.
M&L for chequered cement concrete tiles 20cmx20cmx25mm thick, set and jointed and pointed in neat cement slurry in floors with grey cement and no pigment.
M&L for providing cement concrete type B1 1:2:4 (20mm graded aggregate) in roof kerbs or mud stops, rounded or chemfered on edges.
S&F glazed and skelton window/ ventilators 30mm thick (2nd class hardwood) open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc; size of members of shutters style and rails to be provided 60-80mm wide complete as specified and directed.
S&F 25mm outer dia 3-layer PP-R poly-propylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stavlized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or floors etc.
S&F Vitreous China bowl urinal flat back size of 465x355x265mm white minimum, with greating and uniun for dischsrge pipe (excluding flushing sisturen, flush pipe and west pipe)
Constr of soakage well (3.00 mtr dia x 3.00 mtr deep) incl excavation in hard/dence soil, PCC 1:3:6 type C2,(using 40mm graded crushed stone aggregate) in foundation, hone combed and solid stone work in cement mortar 1:4, RCC cover slab, filling all as specified and shown in drawings (CESZ/TD-1078/2011 sh No 1/1 dt 01 Dec 2011)
Plain cement concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes incl packing under and hauching against the side of pipes after they are laid and tested for 150mm bore SGSW pipes complete Note-(i) Thickness of concrete bed shall be 100mm. (ii) The payment of concrete hauching for the portion over offset of the manhole shall be paid under Item No 10 below.
S&F 150mm dia SGSW pipe laid in trenches and jointed as specified
supply, laying,fixing, passing through pipe or laid in trenches and testing underground XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross section area 10 sqmm 2 core complete all as specified and directed.
Sand cushioning for under ground cable 8 cm before laying the cable and 15 cm after laying and streching the cable complete all as specified and directed by Engineer-in-Charge.
M&L Un-reinforced precast factory made concreate cable covers, class LV type-I, with flat size 250x150x40 mm Complete all as specified and directed.
Supply and laying GI pipe medium grade 40 mm fixed on walls/ poles/laid in trenches as cable protection all as directed and specified.
M&L Point wiring with 1.5 Sqmm (nominal area) copper conductor FRLS cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through PVC casing and caping of suitable size (as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge.
(a) One light point controlled by one 5 Amps one way switch
(b) One 3 pin socket outlet 5 Amps on independent board
(c) One 3 pin socket outlet 5 Amps on same board
M&L point wiring for power point with 4.0 sqmm (nominal area) copper conductor FRLS cable ( multi-stranded) PVC insulated and unsheathed cable conductor 1100 Volts drawn through PVC casing capping of suitable size(as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 2.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge.
S & F Switch piano flush button single pole one way 5 Amps, 240 Volts complete all as specfied and directed by Engr-in-Charge.
S&F switch socket combination 3 pin, 5 Amps, 2 in 1 flush type (multipurpose) suitable for 2 pin / 3 pin plug complete all as specified and directed by Engir-in-Chage.
S&F switch socket combination 2 in 1, 3 pin, 5/15 Amps, flush type (multipurpose). Complete all as specified and directed by Engr-in-Charge.
S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge.
Supply and fixing Rechargeable LED inverter Bulb energy saver 9 W ,B22 (220-240 V) 50 hz, 6500k, fast charging 2200 mAH battery inbuild ,white color all as specified and as directed. Make- Phillips stellar bright or equivalent
S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 20W, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed.
S&F Ceiling rose surface backelite ISI marked with 3 terminal including connecting and testing complete all as specified and directed.
S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 8 way complete all as specified and directed.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed.
Supply and fixing MCB SPN 240V, 10KA 'C' curve (40-63) Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.
M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed.
Supply & Fixing LED light fitting 1X10W bulkhead luminaires including LED light and driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Supply and fix exhaust fan 250 mm sweep plastic type (make-Havells venti air DX or equivalent) all as directed and specified.
M & L for GI Pipe (medium grade,ISI Marked) 32 mm dia ,1.5 mtr long ,bend to shape for street light fitting bracket ,with 2x pairs of MS clamps of suitable length of size 40x5 mm of MS flat iron with nuts bolts and washer including connection with street light complete all as directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete making all necessary connection with suitable capacity of 3 core circular cable complete all as specified and directed.
Deduct Schedule of Credit of Rs (-) NIL (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.
BETONG BUILDERS
MS SHOWKAT ALIJOO
M/S BHAT ENGINEERS
M/S LIBE & CO
osho traders
M/S MOHD KARIM
M/S MUNEER HASSAN AKHON
M/S SONAM RIGZIN
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .