REPAIR /REPLACEMENT OF RUSTED GI /CI PIPE LINE, CLEANING OF OVERHEAD TANKS, UG SUMPS, REPAIR OF WATER PUMPS AND CONNECTED WORKS AT DRDE GWALIOR UNDER GE I RND DELHI

Amount

Excavation in trenches, not exceeding 1.5 m in depth, for fdn etc or for laying of water tubing and n. exc 10 Sqm on plan and n. exc 1.5 m in width and getting out in soft/loose soil complete all as specified and directed

Returning , filling in , including spreading , leveling , watering and well ramming in layers n.exc 25 cm complete all as specified and directed

Removing excavated material to a distance exc 200 m but n.exc 250 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed

Taking up old GI tubing and connections of 20mm bore from excavated trench /walls /floors etc complete all as specified and directed

All as per item No 4 above but 25mm bore pipe

All as per item No 4 above but 40mm bore pipe

All as per item No 4 above but 50mm bore pipe

All as per item No 4 above but 80mm bore pipe

All as per item No 4 above but 100mm bore pipe

Relaying of old GI tubing 20mm bore galvanised medium grade of any length including all new GI fitting such as bend , elbow ,tee laid in trenches/floor complete including cleaning /returning the old screw threads complete all as specified and directed

All as per item No 10 above but 25mm bore pipe

All as per item No 10 above but 40mm bore pipe

All as per item No 10 above but 50mm bore pipe

All as per item No 10 above but 80mm bore pipe

All as per item No 10 above but 100mm bore pipe Note : for ser item no 10 to 15:- Serviceable pipe obtained from item No 4 to 9 shall be reused

Supply and laying GI tubing 20mm bore galvanised medium grade of any length including all GI fitting such as bend , elbow ,tee and union laid in trenches with required cutting , threading etc complete all as specified and directed

All as per item srl No 16.00 above but 25mm bore pipe

All as per srl item No 16.00 above but 40mm bore pipe

All as per item srl No 16.00 above but 50mm bore pipe

All as per item srl No 16.00 above but 80mm bore pipe

All as per item srl No 16.00 above but 100mm bore pipe

Supply and laying GI tubing 20mm bore galvanised medium grade of any length including all GI fitting such as bend , elbow ,tee and union laid in wall/floor/ ceiling with required cutting , threading etc complete all as specified and directed

All as per item srl No 22.00 above but 25mm bore pipe

M&L for CPVC tubing medium grade of size 25 mm dia (outer dia) medium grade complete with necessary fiitings leak proof complete all as specified and directed .

M&L for CPVC tubing medium grade of size 32 mm dia (outer dia) medium grade complete with necessary fiitings leak proof complete all as specified and directed .

Taking out sluice valves 80mm bore transported to work shop for leathe work rethreading, refacing , regrinding and refixing with repacking stuffing box of sluice valve spindle including taking apart and reassembling complete all as specified and directed

Taking out sluice valves 100mm bore transported to work shop for leathe work rethreading, refacing , regrinding and refixing with repacking stuffing box of sluice valve spindle including taking apart and re-assembling complete all as specified and directed

Taking out sluice valves 150mm bore transported to work shop for leathe work rethreading, refacing , regrinding and refixing with repacking stuffing box of sluice valve spindle including taking apart and reassembling complete all as specified and and directed

Material and Labour for Replacement of unserviceable gun metal glove or gate valve of brass heavy duty ISI marked with iron wheel head , screwed both ends for iron pipe and fixed of 20 mm bore complete all as specified and directed

All as per item srl No 29.00 above but 25mm bore pipe

All as per item srl No 29.00 above but 40mm bore pipe

All as per item srl No 29.00 above but 50mm bore pipe

Supply and fixing in repair 20mm Stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly angle, screwed both ends for iron pipe or for union and fixed on GI pipe complete all as specified & directed.

All as per srl item No 33.00 above but of size 25mm.

Material and Labour for Replacement of cast iron 80mm bore sluice valve PN 1.6 both ends flanged heavy duty drilled and installed with brass spindle gun metal face rings rubber gasket 3mm thick MS bolt nuts and washers, graphite rope complete all as specified and directed

All as per item srl No 35.00 above but 100mm bore pipe

All as per item srl No 35.00 above but 150mm bore pipe

Material and Labour for Replacement of cast iron 80mm bore Non return valve both ends flanged heavy duty drilled and installed with brass spindle gun metal face rings rubber gasket 3mm thick MS bolt nuts and washers, graphite rope complete all as specified and directed

All as per item srl No 38.00 above but 100mm size

Labour only for cutting of CI pipe (2 cut) in position for repairing/ reducting to required length for insertion of new tees, branch pieces etc of size 80mm dia bore complete all as specified and directed .

Dismentling lead joint of under ground CI pipe line 150mm bore. M&L for lead joint by adding extra lead (minimum 40%) and new spun yarm up to the extant as specified in SSR part -I and testing including necessary earth work in sludgy soil , dewatering and refilling the same in layers complete all as specified and directed. Note:- Retrived lead shall be re-used with new lead.

All as per item srl No 41.00 above but 100mm bore pipe

All as per item srl No 41.00 above but 80mm bore pipe

Taking down old CI fitting such as bends , tees etc and Supply & Fixing Bends up to 180 mm bore (any type radius and angle tapers any type , straight , bend increasing ,decreasing or double socket etc) Tee pieces single branch , Y junction , double branch , cross (all sockets or socket and spigot ) collars caps and plugs complete all as specified and directed

M & L construction of brick masonry valve pit of size 1.20x1.20x1.30 mtr (internal dimension of chamber ) complete 10cm thick PCC 1: 4 :8 type D2 in base , 10 cm thick PCC 1: 2 :4 type B-1 in floor 23 brick work using sub class well burnt B brick in CM 1:4 and frame of angle iron 30x30x4mm embedded in 10mm thick PCC 1:2:4 with 3.15mm thick MS sheet cover with locking arrangement including 6 lever pad locks and coats of synthetic enamel paint over a coat of primer including excavation in any type of soil , filling removal of surplus soil complete all as specified, shown in drawing No TD/AR/21/97 (Sheet No 1/1) and directed

All as per item srl No 45.00 above but size 0.90x0.90x1.20Mtr depth

Supply and fixing in replacement of Water pressure gauge as per exiting ISI Mark complete all as specified and directed.

Repair to leakage of existing GI pipe line 80mm to 150mm bore in any positions in trenches, Digging out leakage point by excavation of required length for repairing including replacement of new fittings. Rates including cutting ,threading ,reflling the excavated soil after the inspection, dewatering from the trenches if required and ramming properly. Note- Replacement of pipe and fittings such as elbows ,tees, sockets, unions, bends, reducers will be measured and paid seprately under relivant items of this schedule

All as per item srl No 48.00 above but 15mm to 50mm bore

Supply only Elbow 15 mm GI, ISI marked complete all as specified and directed.

Supply only Elbow 20 mm GI, ISI marked complete all as specified and directed.

Supply only Elbow 25 mm GI, ISI marked complete all as specified and directed.

Supply only Elbow 40 mm GI, ISI marked complete all as specified and directed.

Supply only Elbow 50 mm GI, ISI marked complete all as specified and directed.

Supply only Elbow 80 mm GI ,ISI marked complete all as specified and directed.

Supply only Elbow 100 mm GI, ISI marked complete all as specified and directed.

Supply only Elbow 150 mm GI, ISI marked complete all as specified and directed.

Supply only Elbow reducer 25 X 15 mm GI, ISI marked complete all as specified and directed.

Supply only Elbow reducer 25 X 20 mm GI, ISI marked complete all as specified and directed.

Supply only Elbow reducer 40 X 15 mm GI, ISI marked complete all as specified and directed.

Supply only Elbow reducer 50 X 25 mm GI, ISI marked complete all as specified and directed.

Supply only Tee 15 mm GI, ISI marked complete all as specified and directed.

Supply onlyTee 20 mm GI, ISI marked complete all as specified and directed.

Supply only Tee 25 mm GI, ISI marked complete all as specified and directed.

Supply only Tee 40 mm GI, ISI marked complete all as specified and directed.

Supply only Tee 50 mm GI, ISI marked complete all as specified and directed.

Supply only Tee 80 mm GI ISI marked complete all as specified and directed.

Supply only Tee 100 mm GI, ISI marked complete all as specified and directed.

Supply only Tee 150 mm GI, ISI marked complete all as specified and directed.

Supply only Tee Reducer 20x20x15 mm GI, ISI marked complete all as specified and directed.

Supply only Tee Reducer 25x25x15 mm GI, ISI marked complete all as specified and directed.

Supply only Tee Reducer 40x40x20 mm GI, ISI marked complete all as specified and directed.

Supply only Tee Reducer 50x50x25 mm GI, ISI marked complete all as specified and directed.

Supply only Tee Reducer 80x80x50 mm GI, ISI marked complete all as specified and directed.

Supply only Tee Reducer 100x100x80 mm GI, ISI marked complete all as specified and directed.

Supply only Union 15 mm GI, ISI marked complete all as specified and directed.

Supply onlyUnion 20 mm GI, ISI marked complete all as specified and directed.

Supply onlyUnion 25 mm GI, ISI marked complete all as specified and directed.

Supply only Union 40 mm GI, ISI marked complete all as specified and directed.

Supply only Union 50 mm GI, ISI marked complete all as specified and directed.

Supply onlyUnion 80 mm GI, ISI marked complete all as specified and directed.

Supply onlyUnion 100 mm GI, ISI marked complete all as specified and directed.

Supply only Union 150 mm GI, ISI marked complete all as specified and directed.

Supply onlySocket 15 mm GI, ISI marked complete all as specified and directed.

Supply only Socket 20 mm GI, ISI marked complete all as specified and directed.

Supply onlySocket 25 mm GI, ISI marked complete all as specified and directed.

Supply onlySocket 40 mm GI, ISI marked complete all as specified and directed.

Supply onlySocket 50 mm GI, ISI marked complete all as specified and directed.

Supply onlySocket 80 mm GI, ISI marked complete all as specified and directed.

Supply only Socket 100 mm GI, ISI marked complete all as specified and directed.

Supply onlySocket 150 mm GI, ISI marked complete all as specified and directed.

Supply only 6" Nipple 15 mm GI, ISI marked complete all as specified and directed.

Supply only Nipple 20 mm GI, ISI marked complete all as specified and directed.

Supply only Nipple 25 mm GI, ISI marked complete all as specified and directed.

Supply only Nipple 40 mm GI, ISI marked complete all as specified and directed.

Supply only Nipple 50 mm GI, ISI marked complete all as specified and directed.

Supply only Nipple 80 mm GI, ISI marked complete all as specified and directed.

Supply only Nipple 100 mm GI, ISI marked complete all as specified and directed.

Supply only Nipple 150 mm GI, ISI marked complete all as specified and directed.

S & F for Replacement of cast iron 100 mm bore Butterfly valve both ends flanged heavy duty drilled and installed with brass spindle gun metal face rings rubber gasket 3mm thick MS bolt nuts and washers graphite rope complete all as specified and directed

S & F for Replacement of cast iron 80 mm bore Butterfly valve both ends flanged heavy duty drilled and installed with brass spindle gun metal face rings rubber gasket 3mm thick MS bolt nuts and washers graphite rope complete all as specified and directed

S & F for Replacement of cast iron 50 mm bore Butterfly valve both ends flanged heavy duty drilled and installed with brass spindle gun metal face rings rubber gasket 3mm thick MS bolt nuts and washers graphite rope complete all as specified and directed

Supply and fixing in replacement of MS flange heavy duty 80mm dia complete all as specified and as directed

All as per srl item No 103.00 above but for 100mm dia

M&L for providing PCC 1:3:6 type C-1, 10 cm thick (using 20mm graded crushed stone aggregate) for repair to road/path etc complete all as specified and directed.

Supply & Fixing bib tap PTMT 20 mm bore ISI marked complete all as specified and directed

Supply & Fixing float valve PTMT 20 mm bore ISI marked complete all as specified and directed

Supply & Fixing float valve PTMT 25 mm bore ISI marked complete all as specified and directed

Supply and fixing DI joint of size 80 mm including clamps, nut, nolts , gasket etc complete all as specified and directed.

Supply and fixing DI joint of size 100 mm including clamps, nut, nolts , gasket etc complete all as specified and directed.

Cleaning internal portion of stone masonry/RCC UG sump of capacity 20000 gallons including removing fine sand/silt deposited inside the over head reservoirs with the help of wire brushes and removing any fungus formation inside the tank, removing the waste as directed and applying caustic soda solution and one coat of lime wash internally including writing work with one coat of synthetic enameled paint for inlet/outlet /Overflow/washout etc. on CI/GI pipes, also marking the direction of flow of water on pipes including painting/writing of letters of (a) date of cleaning (b) Next due date of cleaning (c) Capacity of tank complete all as directed by Engineer-in-charge.

All as per item srl No. 111.00 above but for RCC over head reservoirs of capacity 25000 gallons.

NOTE : All precautionery measures such as safety belt, climbing rope etc to be taken by the contractor for safeguard of human life while working on overhead reservoir

Repair to water level indicator of overhead reservoir/semi under ground tank by providing aluminum float valve of suitable size with refunctioning of pulley and replacement nylon rope 4mm thick, painting the existing water gauge with two coats of synthetic enameled paint(black) and calibration the same properly with respect to water level and marking with white synthetic glazed paint and painting the indicator pointer with red paint of glazed synthetic enameled paint all as specified and directed

Disconnecting the existing non functional submersible pump sets, dismantling from rising mains, removing and lifting out submersible pump sets of 7.5 HP to 20 HP capacity in any position along with existing column pipe 80 mm dia any type and submersible cable of any size from bore well 150/200mm dia (approx 70 mtr depth of pupmpset from GL).

Lowering down the serviceable submersible pump sets of any description and in any position and in any capacity in bore well along with the column pipe 80mm dia up to 70 mtr deep and submersible cable of any size complete all as directed and making necessary electric connection, connect with rising main and testing complete after lowering.

Dismantling and strip opening of submersible pump and motor 15 HP to 20 HP, 3 phase, 415 volts, 50hz AC Supply of any description and in any position for servicing/overhauling, cleaning, greasing, removing and replacement of defective unserviceable parts with new parts, reassembling the pump and motor with proper alignment of both pump and motor, fixing in position connecting to existing system and testing at site of full load to the entire satisfaction of the Engr-in-charge.

All as per ser item No.116.00 above but 10.5 HP to 12.5 HP, 3 phase, 415 volts, 50hz AC Supply

All as per ser item No. 116 above but 7.5HP, 3 phase, 415 volts , 50 Hz AC supply. Note for item No. 116 to 118: (i) The replacement of defective non functional parts shall be measured and paid for separately under respective item of Sch A (ii) Burnt out winding of motor shall be replaced measured and paid for separately under appropriate item of Sch A. (iii) The rate of above item shall be deemed to include transportation to and fro of pump, motor to workshop for necessary repair, alignment and testing of pump and motor at workshop. (iv) lifting and lowering of the submersible pump & motor,shall be measured & paid under relevant Sch 'A' item .

Supply only Gun metal bush upper and lower.

Supply only Brass thrust plate

Supply only C I thrust bearing

Supply only CI thrust casing

Supply only Water seal

Supply only CI lower housing of shaft

Supply only CI upper housing of shaft

Supply only Rotor sleeve

Supply only coupling set with key of stainless steel

Supply only discharge outlet CI

Supply only stage casing CI

Supply only gun metal sand guard

Supply only gun metal neck ring

Supply only gun metal impeller

Supply only gun metal body bush

Supply only CI suction housing

Supply only SS distance bush

Supply only key for coupling.

Supply only cable seal

Supply only upper flange with studs & nuts

Supply only lower flange with studs & nuts

Supply only Connection piece with nuts and bolts

Supply only Gun metal seal bush.

S&F HS shaft with key for the submersible pumps of any description and capacity having 7 to 10 stages 10.5 HP to 20 HP complete all as specified and directed

S&F in repair for rewinding of submersible motor 15 HP to 20 HP, 3 Phase 415 V, AC 50 Hz with proper size PVC insulated copper winding wire of existing size and approved make after taking down burnt winding, cleaning of slots with CTC solution, fixing in position and testing complete all as specified and as directed.

All as per ser item No.143.00 above but 10.5 HP to 12.5 HP, 3 Phase 415 V, AC 50 Hz.

All as per ser item No.143.00 above but 7.5 HP, 3 Phase 415V AC 50 Hz.

Disconnectiong existing defective centrifugal/booster pump set with electric motor of any make of 10 HP capacity from electric mains isolating the naked connections, removing from foundation by unscrewing the nuts, bolts etc, discouple from pump etc and carrying the servicing of defective pump unit at any workshop, dismantling for grinding, machining and polishing to retrieved pump shaft, replacement of impellor and GM bushes, space bushes, replacement of rubber gasket and carrying back to the site and re-assembling of suction and delivery pipe line including replacement of wornout nut, bolts, washers etc complete all as specified and directed Note: Replacement of defective parts shall be measured and paid separately under relevant item.

M&L for replacement of existing Ball bearing of the electric motor of capacity 10 HP complete all as specified and directed.

M&L for replacement of CI impellor as per existing size for 10 HP Pump complete all as specified and directed. .

Rewinding of electric motor while taking out all the burnt stator winding coils and preparing the stator surface, rewindig the stator with suitable gauge of super enamelled copper wire with insulating materials, sleeves, polishing, varnishing etc including connection of leads with suitable size copper lead wire upto terminal plate of the motor for the capacity of Induction Motor , 3 Phase complete all as specified and directed. .

S&F for heavy duty GI Bend suitable for 80 mm bore column pipe, one side threaded for socket & other side drilled for nut bolts for flange & having arrangement of mounting pressure gauge, including flange & socket.

BLANK

M&L for servicing of LT panels/ automatic starters complete including minor replacement of burnt internal wiring, thimbles/ lugs, replacement of burnt bolts, nuts and washers and major replacement of accessories like MCCBs, MCBs, Changeover switches, Power contactor etc complete all as specified and directed. . Note : - 1. Minor accessories shall deemed to be included in the quoted unit rate. 2. Major accessories shall be measured and paid separately under relevant item.

Supply and fixing in replacement of Digital type voltmeter 0-500 V square type 96mmx96mm complete all as specified & as directed

Supply and fixing in Replacement of Digital type Ammeter 0-30 Amps square type 96mmx96mm with required size CTs complete all as specified & directed

Supply and fixing in replacement On Load Change over switch in sheet metal encloser of 100 Amps, 4 pole, 415 volts complete all as specified and directed.

Supply and fixing 3 pole MCCB 200 amp 415 V adjustable type with breaking capacity 36 KA complete all as specified and directed

Supply and fixing in replacement of 3 pole MCCB 125 amp 415 V adjustable type with breaking capacity 36 KA complete all as specifiedd and directed

Supply and fixing in repair power contactors AC-3 rating 40 Amps, 415 Volts complete all as specified and directed.

Supply and fixing Bi metalic over load relay for automatic starters to operate 20 HP pump set of relay range 40-50Amp complete all as specified and directed. .

Supply and fixing Star delta timer range 0-30 Sec, 250V.

Supply and fixing Star delta timer range 0-30 Sec, 415V.

Supply and fixing in replacement of fully automatic star- delta motor starters oil merged suitable for capacity 10.5HP to 20 HP motor with overload, over current, overheat etc protection system complete all as specified and directed

M&L in repair for submersible cable joint for 3 core 6 Sqmm/10 Sqmm with waterproof compound and testing complete all as specified and directed.

Supply and fixing in repair stainless steel spindle with gun metal nuts suitable for 150 mm dia sluice valve complete all as specified and directed.

All as per item srl No 166.00 above but 100mm dia sluice valve

All as per item srl No 166.00 above but 80mm dia sluice valve

Supply and fixing leather packing 6mm thick complete all as specified & directed

M&L MS frame including 6 mm thick MS sheet cover with locking arrangement, MS frame made out of 40 x 40 x 6 mm thick angle iron including painting of steel surface with two coats of synthetic enamel paint over a coat of redoxide primer including nut bolts, washer, welding, bending, drilling holes for bolts in any shape or size as indicated complete all as specified & directed.

Supply & installation in replacement of stequa single stage auto economy sanatizer station

Supply only Stequa auto economy refile 411 AE Tablet.

M&L for construction of fire fighting post of height 3.5 feet x length 6 feet x width 3 feet having arrangement for hanging of fire bucket made out of MS angle 40 x 40 x 6 mm and MS sheet duly painted with PO red enamel and construction of PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) foundation for fire fighting to be prepared as per direction of Engr-in-charge

Supply installation in repair bucket made out of MS sheet of capacity 9 ltr with carrying handle at bottom of the bucket each for fire fighting point duly painted with PO office red enamel complete all as specified and directed

Supply and lying in repair of rubber mat of size 1 M x 2 M , 19 mm thick complete all as specified and directed

Supply installation in repair ABC type fire Extinguiser of capacity 9 ltr (ISI marked) with all assesories complete all as specified and directed

Supply and installation in repair wooden made duly painted first aid box in built hanging and locking arrangement with all necessary first aid medicines material complete all as specified and directed

M&L for re-threading of GI column pipe 80mm dia 3m long including cleaning, finishing complete all as specified and directed

Supply and fix in repair of PVC insulated Submersible 3 core copper multi standard flat cable 6 Sqmm 1100 Volt complete all as specified and directed.

Supply and fix in repair of PVC insulated Submersible 3 core copper multi standard flat cable 10 Sqmm 1100 Volt complete all as specified and directed.

Supply and fiixing LED Aviation obstruction light Die-cast aluminum housing with Red polycarbonate dome having IP -65, 240 V for Overhead Water storage tank or reservoir over the height of 1.5 mtr above the top of Tank including with fixing arrangement complete all as specified and directed

Supply and fixing single door MCB DB 2 way including MCB SP 10 AMP - 01 No complete including necessary electrical connection for aviation light as catered at item No 181 of this Schedule.

Supply and fixing on surface wheather proof service wire connection of, single strand 1100 volt size 6 Sqmm 2 core for obstruction light by mean of clips/ saddling complete all as specified and directed.

Material and Labour for earthing complete with iron earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not less than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron strip of 32x6 mm by means of Copper nuts, bolts and washers. Strip laid in 40mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following complete all as specified and shown in electrical plate No 3 of SSR Part-I & testing on completion :- (a) GI strip of size 32mm x 6mm. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) Excavation & earthwork in any type of soil PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 50mm thick 1:2:4 type B1 reinforced with 8mm dia mild steel bar 75mm centre to centre with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover.

M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or any other indicated situation for loop earthing etc as required 25x4mm galvanised iron strip complete all as specified and directed.

M&L for PCC 1:4:8, Type D-2 using 40mm graded stone aggregate for repair to footpath for borewells, pump houses etc complete all as specified and directed.

Supply & Fixing in replacement, retro reflective installation board made out of acrylic sheet, size 1.2 x 1.0 Mtr. Writing with computer graphic marking, size of letter not more than 50 mm in length with approved white letter writing on blue back and border of 10mm all around including necessary grouting the installation board with PCC 1:2:4 type B, with 20mm graded stone aggregate upto the depth of not exc. 50mm from ground level and to the ground with angle iron of size 40x40x6mm complete with necessary frame work, welding, bending etc complete all as specified and directed

Supply installation, Commissioning and testing Automatic Power Factor Correction (APFC) panel of capacity 20 KVAR and panel shope /size of suitable as approved by GE for 3 phase, 4 wire, 416 Volls, AC, 50 Hz supply, Outdoor cubical type, dust and vermin proof. pedestal mounting type suitable for Outdoor applications having suitable shape size canopy on top, made out of 3.16 mm thick MS sheet with using 40mm x 40mm x 5mm angle iron frame and supports, duly finished with powder coated using two coats of synthetic enamel paint of approved colour over a coat of red oxide primer all over steel surfaces complete with separate compartment of suitable shape and size with shutter and locking arrangement for each switchgear and including PCC work for fixing panel legs and bus bar of aluminium conductor suitable shape and size for 3 phase& neutral of rating 200 amps including taking out end connections of the existing cables and fixing the cable with the panel using new lugs and glands of suitable size including following switchgear & controls

M&L for rubber gasket/tightening joints for 100mm dia CI pipes complete all as specified and as directed

Surface excavation or surface dressing in hard/dense soil, not exceeding average 15cm deep for cleaning the area by cutting the unwanted bushes/vegitation growth in and around the area of installations/around the valve pit chamber/along the pipe line routes if reqd etc complete all as specified and directed.

Supply and fixing in repair add on aux contact for existing MNX contactor complete all as specified and directed.

anand enterprises

GUPTA ENGINEERING WORKS