Diversion of 132 KV Bansi-Mehdawal S/C Transmission line between location No. 51 to 58 under Electricity Transmission Division-II, Basti H.Q. at Siddharthnagar

Part (A)- Supply

Tower Accessories.

Number Plate

Danger Plate

Phase Plate Set of red blue and yellow

Circuit Plate (Set of Two)

Bird Guard

Earthing Material

Conductor Accessories Suitable for ACSR Panther.

Vibration Damper

M.S. Joints.

Repair Sleeve & others items

P.A. Rod

Hardwares & Insulator Accessories for Conductor.

Single Suspn FTTG.

Single Tension FTTG.

Double Tension FTTG.

70 KN Poreelain Insulator.

120 KN Porelain Insulator.

Supply of Earth wire and accessories.

7/3.25 mm GS Earth Wire

Suspension clamp seated type.

Tension Clamp

Copper Bond

Part (B)- Erection Work

Survey including preparation of schedule of materials, marking of locations (Router Length). GPS Survey of line with co-ordinates of each tower (The length of line shall be authenticated by GPS Survey.

Check Survey

Soil Investigation (all kind of soil)

Cost of excavation of 132 KV tower foundation pits including all earth work backfilling levelling etc.

Setting of Nuts including all foundation work but encluding the cost of concerting excavation (Rate per Location) for following towers.

132 KV DA Panther

132 DB Panther

132 KV DC Panther

Cost of concreting of all type of tower foundation including cost of cement, dewatering , shoring and shuttering, forming, curring cube test but excluding cost of reinforcement bars.

1:2:4 concreting.

Erection of superstructure of 132 KV DC Tower and anchor tower and their extension wherever required including all work above ground level excluding hosting in insulators hardware & Accessories,but including fitting of danger number, phase plates, bird guard and fixing & punching for 132 KV SC/DC lines. ( Tower type- DA+0=2Nos, DA+5=1 Nos. DB+0=1Nos, DC+0=2Nos, DC+5=2 Nos, DC+15=2Nos.

Tack welding of all the bolts up to the height of one section of the tower or 5 meter from ground level whichever is higher with three tacks at 1200 seperation of minimum 10 mm thickness with 10mm/12mm electrode & application of zine rich alluminium paint of the affected surface including cost of all material including tack welding of river crossing tower & Anchor Towers.

Installation of steel reinforcement bars m RCC Foundation including cost of steel reinforcement bars with cutting bending placing dinding etc. (Appendix-6).

Laying, Stringing tensioning, clamping jointing etc. of ACSR Panther conductor including hoisting of insulators, fitting of all necessary hardware and accessories i.e. fitting armor rods vibration dampers etc. on all three phase of 132 KV SC Lines.

Laying, Stringing, tensioning, clamping, jointing including fitting of all necessary Hardware and accessories Earth wire etc. on 132 KV line

Grounding work including earthwork etc. pipe type grounding including cost of cake & salt.

Dismantalling work.

De-Stringing of conductor, disc insulator, rolling of Dismantle conductor and all associated work of all Three conductor

Dismantling of existing Earth wire, necessary hardware, rerolling earth wire in empty\ drum and safely transportation of all removed material to 220KV Bansi S/S Store.

Dismantling of Towers, stacking of tower part and all associated work .

Transportation of Dismantled material including shifting up to loading point, loading into vehicle, transportation, and unloading at Store of 220 KV

Please Enable Macros to View BoQ information