Installation Of A.C., Internal Electrification Work And Supplying Of Furniture At Distance Education Office At Iet Department Davv Khandwa Road, Indore(M.P.)

Amount

Furniture Work

BT- MF-102 MD's Table with side runner with drawer pedestal Overall table size : W 1800mm x D 900mm x H 750mm, Top made of 36mm thick BSL particle board and short sides duly seated with PVC edge beading of 2mm thickness. Base made of 36mm thick BSL particle board with levellers. Top supporting rail of 25mm thick BSL particle board. side runner of size W 1000mm x D 400mm x H 634mm. made of 18mm thick BSL Particle board and top 36mm BSL particle board. Side runner shall have one cupboard. pedestal with three drawer shall be provided of 450mm width. Overall appearance of the item shall be as per the photograph.

Wooden SDU -1200 Ht. Size: Height:1200mm,Width:900mm, Depth:400mm. Top made of 18mm thick Pre-laminated Particle Board. Side ,back, Self and Sliding Door are made by 18mm thk. Pre-laminated Particle Board. Superior quality make front mounted lock.

UE 102 Hi-Back Overall Size - Max/Min. Height-1285/1165mm, Width-690mm, Depth - 700mm, Seat Height-640/520mm, Seat Size-W-560mm x D-530mm, Back Size-H-770mm x W-530mm, 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed ply wood with steel T-Nuts for rigid fastening. Sturdy steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel column. Lockable centre tilt mechanism and with Single piece die castes Nylon arm rest with Cushion. Quality Latherite tapestry with single and double stitch. High density PU cushion. Over all appearance of product as shown in picture. Available in only Black Latherite.

UE 102 Visitor Overall Size - Height-1035mm, Width-690mm, Depth-690mm, Seat Height-490mm, Seat Size-W-560mm x D-530mm, Back Size-H-640mm x W-530mm, Under Structure cantilever type MS cold rolled close annealed Tube Dia. 32mm x 1.6 mm thick. Hot pressed ply wood with steel T-Nuts for rigid fastening. Single piece die castes Nylon arm rest with Cushion. Quality Latherite tapestry with single and double stitch. High density PU cushion. All steel components should be epoxy powder coated followed by seven tanks anti corrosion treatment of surface. The overall appearance of the product shall be as per photograph. Available in only Black Latherite.

Sofa 3Seater-cs-23 Specification- Size-H-870 mm, L-1940 mm, D-840 mm. Structure made of treated agro wood, fitted with 50mm wide rubberized belts 50mm wide with high density PU foam as per design, Upholstered with premium quality PU cloth with help of stitching, where ever necessary. Tapestry- 06 Mtr. Overall appearance as per photograph.

Corner Table Size: Length: 600mm, Width: 600mm, Height: 450mm. Under Structure made of MS cold rolled close annealed tube 1.2 mm thick, duly powder coated after anti corrosion treatment of surface. Top Made up from 18mm Pre-laminated Particle board/ 12mm clear float glass.

Centre table Size: Length: 900mm, Width: 600mm, Height: 450mm. Under Structure made of MS cold rolled close annealed tube 1.2 mm thick, duly powder coated after anti corrosion treatment of surface. Top Made up from 18mm Pre-laminated Particle board/ 12mm clear float glass.

Wooden Table 1500x750x750 with MSU Overall Size:- Length:1500mm, Width: 750mm, Height: 750mm, Top made of 25mm thick Pre-laminated Particle Board. PVC edge beading of 2 mm edges by Through Feed Machine. Provision of Cable manager as per L.H. or R.H. side requirement. Cable duct made of 0.8 mm CRCA Sheet. Leg/Side made of 25 mm thick PLPB fitted with Aluminium section of size 60X40 with grooving. Leg/Side Base & Top plate with profile cut made of M.S. plate 44 mm width & 4 mm thk with knock down fitting arrangement. All steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface. Wooden MSU:- Size: Height:650mm, Width:400mm, Depth:450mm Top made of 18mm thick Pre-laminated Particle Board. Side ,back and drawer front are made by 18mm thk. Pre-laminated Particle Board. Metallic finish heavy duty handle. Superior quality make front mounted lock. provision of Casters for mobility. Special drawer slides for filing drawer. Other drawers on roller slides. The overall appearance of the product shall be as per photograph.

Chair Premium Ergo HI-back Size: Total Height-1070-1190mm, Depth 685mm, Width-590mm Seat Height:425-510mm. 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed ply wood with steel T-Nuts for rigid fastening. Seat and back are covered with PP cover. Sturdy steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel column. Lockable centre tilt mechanism and with Single piece integral skin PU arm rest. Quality tapestry. High density Moulded PU cushion. Upholstery 1.5 Mtr. Over all appearance of product as shown in picture.

Chair Premium Ergo Visitor Size: Total Height-840mm, Depth 600mm, Width-575mm Seat Height:450mm. Under Structure cantilever type MS cold rolled close annealed Tube 1.6 mm thick. Hot pressed ply wood with steel T-Nuts for rigid fastening. Single piece integral skin PU arm rest. Quality tapestry. Seat and back covered with PP covers. High density PU moulded cushion. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. Upholstery 1.2 Mtr. The overall appearance of the product shall be as per photograph.

A.C. and Electrical Work

Cassette AC :- Supply installation testing and commissioning of split type ceiling cassette Slim line/floor standing air conditioning unit of capacity including indoor, outdoor unit fitted with rotary compressor, copper condenser and first charge refrigerant R410A/ecofriendly green gas only, cordless remote control, auto air swing louvers, connection copper lead wire between outdoor and indoor unit, connection copper lead wire upto 1.5 mtr., excluding connection copper pipe of required size, insulation, floor stand for outdoor unit, condense water outlet complete etc as required. Outdoor/indoor units should be of same make (brand). Ceiling suspended/mounted cassette type 4 way unit with inbuilt drain pump & decorative panels. 2.0 TR single phase

AC installation: - Installation of split type ceiling cassette air conditioning unit including indoor, outdoor unit fitted with rotary compressor, condenser and first charge refrigerant R410A/ ecofriendly green gas only including connection of copper pipe and material supplied with complete unit etc as required.(excluding cost of copper pipe)

Supply, installation, testing & commissioning of suction/discharge copper pipe line in split air conditioning unit 1.0/1.5 TR/2 TR/3 TR capacity including brazing, nitrile rubber insulation 6/9mm thick class 'O', etc complete as required.

5/8 , 1/4 INCH FOR 2 TR

5/8 , 1/4 INCH FOR 2 TR

Controlcable: - Supply and laying, testing & commissioning of following sizes of copper conductor control cables on existing tray including fixing clamps & proper connections to equipment etc. complete as required. CABLE 2 C X 1 SQMM

CABLE 4C X 2.5 SQMM

Drain piping :- Providing and fixing of CPVC, 6Kg/cm2 drain water piping with fittings, support and insulated with 6 mm thick closed cell elastomeric nitrile rubber insulation complete as per specification. 20 mm dia ID

Outdoor stand fabrication :- Supply, fabrication and erection of angle/channel/flat iron stand, hanging arrangement for air conditioning machines & ducts etc, back /support clamps or other similar work etc. including nut bolts of required size, making holes, fabrication, welding, cutting, etc. and painting with one coat of red oxide paint & two coat of enamel paint as required as per specification.

MINOR CIVIL WORK RELATED TO AC Fitting and Wall Repairing etc.

Supply, Installation, testing and commissioning of light point, exhaust fan point , wall fan point with 1.5 sq. mm. copper wire (for phase,neutral earth wire)1.1KV grade PVC insulated (including supply of all material like hardware , GI boxes , conduits ,modular switches,accessories.

Supply, Installation, Testing and commissioning of light points in group control system including 1.5 sq. mm copper flexible 1.1 KV grade insulated wire (for phase,neutral earth wire),modular switch, switch board, conduit and material.Neutral & earthing can be looped on points for one light point. 2 Lights controlled by 6A switch.

Supply, Installation, Testing and commissioning of Bell/Buzzer point including 3*1.5 sq. mm copper 1.1 KV grade insulated, conduit, bell, buzzer and material.Including CPL buzzer board

Supply & Installation of 1.6mm thick MMS FR grade ISI conduit of approved make with accessories like heavy duty pull boxes with covers, GI saddles, bends, socket etc. in concealed/surface manner in wall, ceiling, floor etc. The work includes chiseling of wall i.e. ziri with mechanical cutter, saddling of conduits at maximum 400 mm distance etc. DIA 25mm conduit

Supply, Installation, Testing and commissioning of following size flexible copper wire 660 V/1.1 KV grade of approved make PVC insulated in existing MS conduits , pull boxes , hardware etc.

2*1.5 sqmm (P&N) + 1*1.0 sqmm (E)

2*2.5 sqmm(P&N)+1*1.5 sqmm (E) (FOR Switchboards and power)

2*4 sq.mm(P&N)+1*2.5 sq.mm (E) ( for AC)

1*10 sq.mm(E)

Supply, Installation, Testing and commissioning of 6A/16A 5 pin switch and socket outlet on separate board 3 no. 6A socket and 1 no. 16A switch on separate board( for computer power) .

Supply, Installation, Testing and commissioning of 6A switch/socket outlet on switch board (including supply of all material like MS box, switch, socket and hardware etc).Including wiring between switch and socket.

Supply, Installation, Testing and commissioning of 16A single phase switch and 16A 5 pin socket (including supply of all material like MS box, switch, socket and hardware etc). Including wiring between switch and socket.

Supply, Installation, Testing and commissioning of 20A industrial socket, 20A pin top and 20A SP MCB with box and the box shall be concealed in wall. The box also shall be of respective make of MCB. Including wiring between switch and socket.

Supply and laying of cables in excavated trenches, concrete trenches, along walls, through hume pipes, cable trays etc

4CX16 SQMM AL.AR XLPE CABLE

4CX4 SQMM CU.AR XLPE CABLE

Cable termination of armoured cables 1.1 KV grade including supply & installation of cable glands, cable lugs (copper or aluminium single compression type), heat shrinkable sleeves on long ends, crimping paste etc. (One set includes termination of all cores of one end only)

4CX16 SQMM AL.AR XLPE CABLE

4CX4 SQMM CU.AR XLPE CABLE

Supply, Installation , Testing & Commissioning of following lighting fixture and fan. All fixtures should be complete with all accessories. LED fitting 36W PHILIPS/WIPRO/BAJAJ MAKE 2X2 complete with all accessories.

Down light fitting suitable for 15 Watt LED lamp complete with all accessories MAKE - WIPRO/PHILIPS/BAJAJ/HAVELLS

Supply , installation, testing commissioning of 4 Way TPN Distribution Board With 63 A 4 Pole MCB as incomer and outgoing 6/10/16A SP MCB -12 Each

Supply,Installation, Testing & commissioning of 0.5 mm size tinned copper conductor , 2 pair PVC insulated telephone wire of approve make in existing MS conduits.

Supply,Installation, Testing & commissioning of Telephone outlet box with top plate

Supply , installation,testing and commissioning of enhanced CAT E6 LAN cable in preveiously laid conduits

Supply , installation,testing and commissioning of RJ 45 connector type computer socket outlet with RJ 45 connector of approved make .