Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹6.1 LAccepted-AOC H NO 2049 HANUMAN COLONY NEAR TCP 3 HISAR CANTT PIN 125006 HARYANA | HISAR | HARYANA | 125006 | 1 | Accepted-AOC L1 | |
| 2 | 2₹6.4 L+₹22,664 (3.70%)Rejected-AOC GURU NANAK NAGAR GALI BHATIA DHARAMSHALA WALI SIRSA HARYANA PIN 125055 | SIRSA | HARYANA | 125055 | 2 | Rejected-AOC L2 | |
| 3 | 3₹7.0 L+₹87,452.20 (14.3%)Rejected-AOC 4 BY 8 BLOCK H NEAR VIJAY CHOWK EAST DELHI DELHI 110051 | EAST DELHI | DELHI | 110051 | 3 | Rejected-AOC L3 | |
| 4 | 4₹7.4 L+₹1.3 L (20.5%)Rejected-AOC | 4 | Rejected-AOC L4 | |
| 5 | 5₹7.5 L+₹1.4 L (22.9%)Rejected-AOC 1000 PUDA MODEL TOWN PHASE 5 BATHINDA 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | 5 | Rejected-AOC L5 |
Tender Value
Refer Docs
EMD Value
₹30,000
Closing Date
27 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) SIRSA
GE (AF) SIRSA
PERIODICAL SERVICES TO MD ACCN AND OTM ACCOMODATION OF DOMESTIC AREA AT AF STN SIRSA
2022_MES_523655_2
GE/SRA/T-09 OF 2022-2023
Open Tender
Miscellaneous Works
Item Rate
273 days
GE (AF) SIRSA
As per NIT and Tender
3 documents required · 3 mandatory
₹500
GE(AF) SIRSA
₹30,000
Yes
21 Jul 2022
8 Jun 2022
29 Jun 2022
8 Jun 2022
27 Jun 2022
13 Jun 2022
8 Jun 2022 - 10 Jun 2022
Amount
Demolition of Brickwork masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
M&L Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, upto double story complete all as specified and as directed.
Removing vegetation growth/shrubs(girth up to 30 CM), cutting in brick wall/concrete surface upto triple storey building carefully without damaging the existing soil, vent, water supply pipe and removing roots of plants completely and filling the gaps with PCC 1:2:4, Type B-0 finished with existing surface including all scaffolding ladder etc as required surface are n.exc. 0.36 Sqm each complete all as specified and directed.
M&L for Non-asbestos Fiber Cement Building Boards 6.0mm thick, fixed to Walls with Rawl Plugs and Steel Screws, and applying Two Coats of Distemper Oil Emulsion (as approved) over a Coat of 1.5 mm thick wall care putty for priming the surface ,and fixed-in-repairs, complete all as specified and as directed.
Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
M&L for Rendering (Internal) 12mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.
M&L for preparing new Plastered surfaces of Walls applying white cement based wall care putty on the surfaces with minimum 1.5mm uniform thickness and making surface absolutely smooth and applying two coats of oil bound distemper on wall surface complete all as specified and directed .
M&L for preparing new Plastered Surfaces of Walls and applying three Coat of White Wash, complete all as specified and as directed.
M&L for Rendering (Ceiling) 5.0mm thick in Cement Mortar 1:3 on Concrete Surfaces as in Ceiling, etc., Plastered Surfaces finished Even and Smooth, without using Extra Cement, complete all as specified and as directed.
M&L for preparing Newly Plastered Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.
M&L for Rendering (External) 15mm thick in Cement Mortar 1:4 on Brick Walls/Concrete Surfaces, roof projection, chajja facia upto double storey mixing with WPC as per Manufactures instruction, plastered surfaces finished even and Smooth without using Extra Cement, complete all as specified and as directed. NOTE : WPC shall be Measured and Paid for as ‘Supply only’ separately under appropriate Item.
Supply only Integral Water Proofing Compound, conforming to IS and/or as approved, complete all as specified.
M&L for preparing newly Plastered surfaces of Walls upto double storey by applying Wall Putty 1.5 mm thick , cutting/rubbing to obtained a Smooth Surface and applying Two Coats of Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.
M&L for Rough Cast Plaster on Brick Walls upto double storey consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed.
M&L for preparing newly Rough Cast plastered surfaces of Walls and applying Two Coats of Weather Coat Exterior Paint (in Camouflage/Plain pattern as ordered) with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.
M&L for preparing Old Decorated/Treated Plastered Surfaces of Walls and applying One Coat of White Wash, complete all as specified and as directed.
M&L for preparing Old Decorated/Treated Surfaces of Ceiling of any description and applying One Coat of White Wash, complete all as specified and as directed.
M&L for preparing old Distempered surfaces of Walls by brooming down or steel wire brushing and scraping down and filling the existing Nails/ Screw Holes, etc. and applying one Coats of Distemper Oil Emulsion (as approved), complete all as specified and as directed.
M&L for preparing Old Decorated/Treated Surfaces of Ceiling of any description and applying two Coat of White Wash, complete all as specified and as directed.
M&L for preparing old Distempered surfaces of Walls by Complete Removal of existing Treatment and applying Wall Care Putty 1.5 mm thick, Rubbing down with Sand Paper to obtain a Smooth Finish Surface including filling the existing Nails/ Screw Holes, etc. and applying Two Coats of Distemper Oil Emulsion (as approved), complete all as specified and as directed.
M&L for preparing old Distempered surfaces of Walls by brooming down or steel wire brushing and scraping down and filling the existing Nails/ Screw Holes, etc. and applying Two Coats of Distemper Oil Emulsion (as approved), complete all as specified and as directed.
M&L for preparing old Decorated/Treated Plastered surfaces of Walls upto double storey by brooming down or steel wire brushing and scraping down and applying One Coats of Weather Coat Exterior Paint (in Camuflage/Plain pattern as ordered) with approved Tint (as per Manufacturer's instructions), complete all as specified and as directed.
M&L for preparing old Decorated/Treated Plastered surfaces of Walls upto double storey by brooming down or steel wire brushing and scraping down and applying Two Coats of Weather Coat Exterior Paint (in Camuflage/Plain pattern as ordered) with approved Tint (as per Manufacturer's instructions), complete all as specified and as directed.
M&L for preparing Old Decorated/Treated Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.
M&L for preparing Old Treated/Painted Steel and Iron Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.
M&L for Writing Letters or Figures (Block Roman, Italic or Indian) on Buildings, 150mm High, complete all as specified and as directed.
M&L for preparing Old or previously treated Plastered/ Concrete Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality), complete all as specified and as directed.
BHATIA ENTERPRISES
AGGARWAL CONSTRUCTION CO.
M/s Manav Builders
M/s Kamal Builders
M/s MANN CONSTRUCTIONS
shiv shanker enterprises
M/s Har Nandi Construction Company
SHILPI CONSTRUCTION COMPANY
KARAM CHAND KRISHAN LAL
yash enterprises
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .