CERTAIN REPAIR TO B AND R WORKS AT RANE ENCLAVE, 13 GARH RIF UNDER AGE B/R-IV OF GE (SOUTH) MEERUT CANTT

Taking down chowkhats or frame exceeding 1.5 Sq. m but not exceeding 4 Sq. m each with shutters without taking off shutters from the frame, complete

Taking down of shutter of any description exc. 1 Sqm & n.exc. 2 Sqm each complete all as specified and directed .

Supply & fix second class hardwood (SAL) as in plain solid straight chowkats or frames, wrought, rafter, purlins and like truss work etc framed together with glue pinned at joints, with single or double rebates or as in purlins, rafters etc complete all as specified and directed.

S&F for flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 30 mm thick, ISI marked, complete all as specified.

S&f 2nd class hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (including MS Hold Fast). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed.

S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

S&F stainless steel butt hinges 100mm size, medium weight, incl necessary screws complete all as specified and directed.

S&F stainless steel handles 150mm size, cast type, anodised incl necessary screws complete all as specified and directed.

S&F stainless steel barrel tower bolts 150mm long of extruded section incl necessary screws complete all as specified and directed.

S&Fstainless steel sliding door bolt 250mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed ISI marked complete all as specified.

Supply and fixing of mild steel 300mm, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

Material and labour for repairing of old wooden doors by repairing projecting/friction type hinges,handle, bolts etc as required and providing new as required complete all as specified and directed.

S&F Galvanized MS wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.14mm and including fixed with wooden beading for securing wire gauge with wire stappler complete all as specified.

S&F as in repair galvanized MS wire cloth 0.45mm nominal dia of wire and average width of aperture 1.14mm and including fixed with tinned tacks, wooden beading, Metal frame for securing wire gauge with wire stappler complete all as specified.

Hacking out old broken glass (any thickness, size, quality or discription) from metal/wooden frames fixed with pin, beading or oil putty

S&F 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading ) in square n.exc 0.5 Sqm in each panes complete

S&F as in Figured glass, 3 mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane, complete all as specified.

Material & labour for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed .

M&L, in repair, 18/19mm thick WPC Solid board, interior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, fixed with SS screws to WPC frame work in cup boards, and kitchen cabinet rebated including 75 mm brass finished handles on each shutter and hydraulic hinges fixed with SS Screws complete all as specified and directed.

S&F in repair Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply & fix in repair 25mm dia Vista pattern of approved colour & finish fancy type curtain rod including brackets and fancy type end knobs, rings etc complete all as specified & directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortor etc.

M&L for 14 to 16mm thick Udaipur Green Stone, polished (table rubbed and polished) as in jambs, window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe complete all as specified and directed.

Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced) complete all as per specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (12.50mm graded aggregate) as in sub base floor etc complete all as specified..

Dismantling floor, hearth or wall tiling also in patches including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified.

Material & labour for non-skid coloured ceramic tiles of size 400x400x7-8mm thick, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified & directed.

Material & labour for non-skid coloured ceramic tiles of size 400x400x7-8mm thick, in dados, skirting etc set and jointed in neat cement slurry and pointed in white/coloured cement to match in over and including 10mm thick rendering CM (1:6) complete all as specified & directed.

Material & labour for glazed coloured ceramic tiles of size 450x300x7-8mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:6 complete all as specified & directed.

M&L for 75mm thick PCC 1:3:6 type C1 (20 mm graded stone aggs) as in plinth protection, path including finished surfaces even and smooth without using extra cement complete all as specified.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.

Material and labour for 12 mm thick rendering in Cement mortar 1:6 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified.

M&L for rendering 10 mm thick in CM (1:3) as in ceiling /facia finished even and fair all as specified and directed.

Materials & labour for perparation of new wall surface and finishing the surfaces of wall with 1 mm thick putty and applying two coat of Oil Bound distemper, any colour, complete all as specified & directed.

M&L for three coats of white washing on new ceiling/chajja surfaces including preparation of complete all as specified and directed.

M&L for complete removal of existing treatment and finishing of wall surface by using Birla white/JK wall care putty and applying two coats of oil bound distemper (OBD) over a coat of primer in any colour complete all as specified.

M&L for preparation of existing walls and applying one coat of oil bound distemper incl repair work like putty, plaster and preparation of required area with primer or extra coat of OBD to merge with existing area of OBD as per requrement on walls including washing, rubbing down and stopping of distempered, painted surfaces on walls all as specified

M&L for preparation of existing ceiling and applying one coat of whitewash incl repair work like putty, plaster and preparation of required area with primer or extra coat of OBD to merge with existing area of OBD as per requrement on ceiling including washing, rubbing down and stopping of distempered, painted surfaces on ceiling all as specified

M&L for preparation old wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

M&L for preparation of old or previously untreated steel surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified & directed.

Taking up or down 20 mm dia steel tubing and connection including cleaning for re-fixing or removal from site complete all as specified and directed

Material & Labour for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges and cutting chases for concealed water tubing, and making good, cutting not exc 10 cm girth.

Supplying and laying of CPVC pipes 20mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors,including all fitttings complete all as specified. complete all as specified and directed

Supply, fix 20mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including Taking up or down GI steel tubing, testing complete all as specified & directed.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia.

Supply & fixing in rotational moulded polyethylene water storage tanks 500 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mm PVC ball valve including dismantling existing water tanks complete all as specified & directed.

S&F as in repair 15 mm bore bib tap long body chromium plated, cast copper alloy, with crutch or butterfly handle, flange, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair CP bibtap for sink, long shank, swan neck with swinging spout (Wall mounted model,)

Supply & fix in repair wall mixer telephonic with crutch brass chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15mm bore pipes with telephonic with crutch (Provision for hand shower) complete all as specified and directed.

S&F as in repair chromium plated Angle stop valve incl flange, any description, suitable for 15 mm bore pipe,complete all as specified.

S&F as in repair vitreous china wash down water closet pan (pedestal pattern), white (flushing cistern and flush pipe) fixed with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed.

Supply and fixing as in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor. complete all as specified.

Supply & fix in repair white plastic seat cover for W.C.(E.T.) white including M.S. CP or aluminium hinging device complete all as specified and directed.

S&F in repair Glass Corner Shelf fitted in wall with screws complete all as specified and directed

S&F as in repair Vitreous China wash basin, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified.

Supply & fix in repairs chromium plated shower roses with swivel joints of 75mm size complete all as specified & directed.

S&F in repair chromium plated health foucet with 1.00 mtr flexible pipe for 15mm bore with fittings, complete all as specified and directed.

S&F as in repair chromium plated Two way bibtap incl flange, any description, suitable for 15 mm bore pipe,complete all as specified.

Supply & fix in repairs PVC connections of 450mm long Make suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply and fix in repairs 40mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq. cm

S&F in reipair CP towel rail brass 20mm dia 600mm long CP finish complete all as specified & directed.

S&f in repairs CP Soap dish, approximate size 100x 70x1mm thick complete all as specified.

Supply & fix in repairs steel C.P. grating 100/125 mm dia waste pipe hole fitted as required at site complete all as directed by Engineer-in-Charge.

S&F 15 mm bore concealed stop cock, chromium plated, cast copper alloy, screwed down with crutch or butterfly handle screwed both ends, as in repair including flench complete all as specified & directed.

S&F in repair 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstan head screwed for 15mm dia pipe fixed in repair.

S&F in repair 75mm outer dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement.

S&F 110 mm dia PVC SWR pipes single socketed in any length with rubber ring joints fixed to wall with and including fixing of MS clamps made out of flat iron of size 25mmx3mm including nuts & bolts and all necessary fitting as socket tee, bend etc complete all as specified and directed. Make: Prince/Kisan/Supreme or equivelant

S&F 75 mm dia PVC SWR pipes single socketed in any length with rubber ring joints fixed to wall with and including fixing of MS clamps made out of flat iron of size 25mmx3mm including nuts & bolts and all necessary fitting as socket tee, bend etc complete all as specified and directed. Make: Prince/Kisan/Supreme or equivelant

Please Enable Macros to View BoQ information