Providing EI and Fans, LT Panel, Cabling and Misc. works for INOC at 1st Floor, Bajirao Road TE Bldg, Pune.

Amount

SITC of cubicle type self standing, indoor floor mounting powder coated UPS Distribution Panel of size 1000 mm (H) x 1000 mm(W) x 400 mm (D) made of 14SWG (For Frame) & 16SWG (For Door & Partition) CRCA sheet suitable for operation on 415 Volts, 50 Hz AC supply, epoxy polyester powder coated with IP-42 protection as per general arrangement drawing and switchgears as per BSNL approved makes as required and comprising of the following-:

Incomer/ Outgoing-: 2 Nos 100 A, 4 Pole MCCBs with operating handle and spreader links

50 mm x 10 mm aluminium busbars for TP & N system.

RYB indicating LED lamps with control MCBs for both incomers.

3 phase, 4 wire multifunction meter- 1 No.

(Note : The panel drawing shall be got approved from the Engineer-in-charge before execution of work.)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. a) Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

b) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

c) 4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed steel conduit as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

a) 1 x 1.5 sq. mm

b) 2 x 1.5 sq. mm

c) 3 x 1.5 sq. mm

d) 4 x 1.5 sq. mm

e) 5 x 1.5 sq. mm

f) 6 x 1.5 sq. mm

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing following modular Switch / socket in existing modular plate & switch box i/c connections but excluding modular plate etc. as required.

a) 5/6 amps switch

b) 3 pin 5/6 amps socket outlet

c) 15/16 A switch

d) 6 pin 15/16 amps socket outlet

e) RJ - 45 Information Outlet

Supplying and fixing following size / modules, GI box along with modular base & cover plate for modular switches in recess etc as required.

a) 4 Module (125 mm X 75 mm)

b) 8 Module (125 mm X 125 mm)

c) 3 Module (100 mm X 75 mm)

d) 1 or 2 Module (75 mm x 75 mm)

Supplying and Drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel /PVC conduit as required..

a) 1 Run of cable

b) 2 Run of cable

c) 3 Run of cable

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing of 450 mm sweep heavy duty exhaust fan alongwith louver shutters including making opening in the wall and making good the same alongwith wiring etc complete as required. (BSNL approved make))

Supplying and fixing of 250 mm sweep Exhaust Fan exhaust fan including making opening in the wall and making good the same alongwith wiring etc complete as required.

SITC of 2 Nos. 4 feet long, T-8, Retro type 20 Watt, 6000 K, Retrofit LED Batten Tube in existing old 2 x 40 Watt Mirror optic fitting including Removing the fitting, removing old tube rods, choke, capacitor and wiring, rewiring the circuit suitable for 20 W LED tube and refixing the same etc complete as required.

SITC of single phase 400 mm sweep, High speed wall mounted BLDC Motor fan with Pull Cords for speed regulation, Plastic body & blades, Min. Air Delivery 60 Cu.mtr/min etc complete as required.

SITC of Round LED down lighter recess mounting Fitting of 15W, 230 volts, 50 Hz housed in metal casing complete with testing & commissioning etc as required.

Supplying and fixing of control contactor for emergency lighting of rating 4 Amp, having coil voltage 230 volts, 50 Hz, with 2NO+2NC contacts with enclosure i/c connections etc complete as required.

Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. a) 300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated pre-painted M.S. cable trays bends with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. a) 300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated pre-painted M.S. cable trays TEE's with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. a) 300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated pre-painted M.S. cable trays CROSS MEMBER with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. a) 300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/lsolator) a) 4 way (4 + 12), Double door

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCCB's as incomer & MCB's as outgoing (but without MCCB's & MCB's) as required. a) 8 way (4 + 24), Double door

Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. a) 100 Amp, 30KA, FPMCCB

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

a) Single pole

b) Single pole and neutral

c) Triple pole

d) Triple pole and neutral

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Providing & fixing 4.00 mm dia copper wire on surface or in recess for loop earthing alongwith existing surface / recess conduit/ submain wiring / cable as required.

Supply of following size PVC insulated , PVC sheathed /XLPE Power cable of 1.1 KV grade, aluminium armoured cable etc complete as required.

a) 4 core x 35 Sq. mm Aluminium conductor cable

b) 3 1/2 core x 95 Sq. mm Aluminium conductor cable

Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on wall surface as required.

a) Upto 35 sq. mm (clamped with 1mm thick saddle)

b) Above 35 sq. mm and upto 95 sq. mm (clamped with 25 x 3mm MS Metre flat clamp)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

a) 4 X 35 sq. mm (32mm)

b) 3 1⁄2 X 95 sq. mm (45mm)

Dismantling of existing Flourescent fittings/ Cables/ Wiring/ DB's from the existing False ceiling/ Flooring as directed by the Engineer-In-Charge from proposed INOC etc complete as required. Area Approx 225 sq. meter

Supplying and fixing Double sided Exit sign Board with Green Super Bright LED's, Size: 12 Inch x 6 Inch, suitable for input voltage 230 V AC supply, alongwith Aluminium housing and battery backup etc complete as required.

Supply of CO2 type Fire Extinguisher, Capacity - 4.5 Kg , with all the fittings & fixtures as required., ISI mark. CC Certified body complete with Hose Pipe, Horn & Mounting Bracket etc complete as required.

Supplying and laying Electrical Insulation Anti Skid Rubber Mat, Thickness 6mm (1 Mtr X 2 Mtr) rubber matting suitable for medium voltage etc complete as required.

R & R SONS (BID ID -890562)

Annapurna Equipments (BID ID -891316)

M/s Satyam Enterprises (BID ID -891164)

STAR ELECTRIC WORKS (BID ID -890026)