Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.5 LAccepted-AOC E 27 CWE WELLINGTON | 24 PARAGANAS NORTH | WEST BENGAL | 700028 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹20.0 L+₹2.5 L (14.2%)Rejected-Finance 18 KUSHAL LAYOUT 1ST CROSS KAGGADASAPURA CV RAMAN NAGAR POST BENGALURU 560093 | BENGALURU | BENGALURU URBAN | KARNATAKA | 560093 | L2 | Rejected-Finance Being not L1 | |
| 3 | Rejected-Technical 5 127 16 GANESH GARDEN KADAMPADI SULUR COIMBATORE TAMILNADU 641401 | COIMBATORE | TAMIL NADU | 641401 | - | Rejected-Technical Being not eligible | |
| 4 | Rejected-Technical 7 345 C 1 AERO NAGAR KANGEYAMPALAYAM KADAMPADI SULUR COIMBATORE TAMIL NADU 641401 | COIMBATORE | TAMIL NADU | 641401 | - | Rejected-Technical Being not eligible | |
| 5 | Rejected-Technical 1 181 KAMATCHI AMMAN KOVIL STREET KANNAN COLONY CHINTHAMANI MADURAI 625009 | MADURAI | MADURAI | TAMIL NADU | 625009 | - | Rejected-Technical Being not eligible |
Tender Value
₹16.4 L
EMD Value
₹32,900
Closing Date
20 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col Subhro Banerjee CWE
Commander Works Engineers AF South Gangamma Circle Opp Guard Room 410 AFS Jalahalli Bangalore 560013
ADDTION ALTERATION TO OMQ BLDG NO T-27 AT AFAC COIMBATORE
2022_MES_529551_1
84221/E8
Open Tender
Civil Works
Item Rate
180 days
AGE (I) (AF) Coimbatore
As per tender documents
7 documents required · 7 mandatory
₹500
AGE (I) (AF) Coimbatore
₹32,900
29 Nov 2022
8 Jun 2022
22 Jul 2022
8 Jun 2022
20 Jul 2022
29 Jun 2022
9 Jun 2022 - 18 Jun 2022
Amount
Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as spcified and directed.
Dismantling of asbestos cement ( corrugated / semi corrugated etc) sheet in roof covering complete all as spcified and directed.
Supply and fixing of non asbestos fibre cement building boards 6mm thick (lake and hill design) laid/inserted to timber/ Steel frmework in repairs all as specified and as directed.
S & F rolled mild steel work in tubular trusses including special shaped washers etc complete using ERW or induction butt welded tubes confirming to IS : 1161-1979Gde St-240 complete all as specified and as directed by Engr-in-Charge.
S & F rolled mild steel plates (plain or chequered) channels, sqares cut or notched (ordinary and counter sunk) forming holes without any attachment. Fe 410 W (Gde E -250) quality - B complete all as spcified and directed.
S&F of roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) conforming to Fe-410-W(Gde?E-250 quality?B including distance pieces, cleats etc. all as spcified and directed.
Dismantling ceiling boards any description, any thickness including cover fillets all as directed.
Supply and fix anodised aluminium snap grid of size 605mm x 605mm frame work for false ceiling using 25x23x1.5mm tee both ways & wall angel of 35x25x1.5mm (wall angle to be fitted to walls by scewing on wooden plugs (inserted in wall at every 60 Cm c/c) and neatly sealed the cutting opening ) and provide 9mm thick prelaminated particle boards fixed or laid/ inserted to aluminium frame work with screws including hangars 6 mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long(all costs are included) all as specified and as directed.
Supply and fix anodised aluminium snap grid of size 605mm x 605mm frame work for false ceiling all as specified and as directed.
Providing and fixing Gypsum Board 9mm thick in ceiling fixed with screw as per manufacturers instructions complete all as spcified and directed.
Supply and fix Armstrong mineral fibre acoustical suspended ceiling system with 600x600x16mm classic lite (Bevelled Tegular) edge tiles with Armstrong 15mm exposed grid. The tile laid on Armstrong superfine 38 with 15mm wide 'T' section flanges colour white having rotary stiching on all section ie. the main runner 1200mm & 600mm cross tees with a web height of 38mm and load carrying of 12.5Kg/sqm and pull out strength of 100 Kgs. The T section have a Galvanising of 90 gm/sqm and need to be installed with suspension system of Armstrong make. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200x600 mm module. Cut cross tee longer than 600mm require independent support. 600x600 mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Permeter trim shall be Armstrong wall angles of size 3000x24x24mm, secured to walls at 450mm maximum centres. Anchor fasteners with verticle Hangers made out of galvanised steel of size 26x26x1.2mm with a galvanised thickness of 80 gms, pre-straightened hanger wire of dia 2.5mm and length of 1.8m, thickness of 80gms, and a tensile strength of 344-413 MPG alongwith adjestable hook clips or 0.8mm thich galvanised spring steel for 2.68mm with a minimum pull strength of 110 kg. The adjestable clip also consists of a 3.5mm Quiline wire to be used with main runner complete all as specified and directed. Make : Armstrong.
M & L for preparing new steel and iron surfaces any description over 10 cm in width or girth, priming with red oxide and applying two coats of synthetic enamel paint complete all as spcified and directed.
M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F Pre-Painted galvalume aluminium zink coating GI based corrugated steel sheet of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding fixed to walls fixed with self tapping screws as specified.
S&F of Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to fe 290 grade E165 all as spcified and directed.
M&L for Granite (of any type) 16 to 18mm thick machine cut, bedded and jointed with gray cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete in window cill, cooking platform and including for 15mm thick screed bed in CM (1:4) complete all as specified and as directed.
M&L for Rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situations complete all as spcified and directed.
S &F for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as spcified and directed.
M&L in repairs for 18/19 mm thick prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as specified and directed.
S&F 75 mm size extruded aluminium alloy handles fabricated type anodised all as specified and directed
S&F continous (piano) hinges mild steel bright finish or electrogalvanised 30 mm wide(width of flab(when open) all as specified and directed
S&F Mild steel Mortice lock vertical type 65 mm size 2 levers including escutcheon plates and two keys complete all as spcified and directed.
S&F 40mm dia cupboard knobs fixed with nut, screw and washer of mild steel, bright finished all as specified and directed
S&F Ball catches with 8 mm dia steel ball and brass body and striking plate including letting in all as specified and directed.
M&L for 18mmthick Veneered decorative plywood, grade 1 (with BWR resin) with one face has decorative veneer ; fixed with screws to timber frame work complete all as spcified and directed.
M & L for preparing old steel and iron surfaces any description n exc 10 cm in width or girth , and applying two coats of synthetic enamel paint complete all as spcified and directed.
Taking down cement plaster in patches on brick or stone walls etc., including ceilings including racking out joints, hacking for key, scrubbing down with water etc.,all as directed.
Material and labour for rendering 15mm thick in cement mortar 1:6 on fair surfaces of brick work or concrete surfaces of wall , finished even and smooth without using extra cement all as specified and as directed work in patches complete all as spcified and directed.
Material and labour for preparation of newly plastered wall surfaces, applying 3 mm thick wall care putty and applying two coats of oil emulsion distemper over a coat of chalk whiting primer complete all as specified and as directed.
S & F in repair stainless steel wall mounted plate rack of size 900x750x260mm of approved make including taking down old wooden plate rack complete all as specified and directed. Make : M/s Blue Star , Model No: BSKPR-311 or other equvalent make as approved by Engr -In-Charge
S&F kitchen sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as spcified and directed.
M&L salt glazed stoneware gully traps, square or round mouthed, type 'P' of size 150x100mm complete all as spcified and directed.
S&F in repairs chromium plated angle valves, cast copper alloy, screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed. 15 mm size complete all as spcified and directed. Make : CERA Model No: F1015201 or equivalent in Leader, Zoloto, Seico, Marc
S&F stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed with both ends for iron pipe 20mm bore complete all as spcified and directed.
S&F in repairs Pillar taps fancy type cast copper alloy, with capstain head, chromium plated screwed down high pressure, with long shanks and fly nuts screwed for iron pipe and fixed 15 mm bore complete all as spcified and directed.
Material and labour for preparation of newly plastered wall surfaces, applying 2 mm thick wall care putty and applying two coats of oil emulsion distemper over a coat of chalk whiting primer complete all as specified and as directed.
Material and labour for preparation of newly plastered wall surfaces and applying two coats of white wash complete all as specified and as directed.
M&L complete removal of existing treatment of old plastered wall surface and applying two coats of distemper oil emulsion over a coat of primer ( Chalk whitening ) with 2 mm thick wall care putty all as specified and directed.
Demolition of cement concrete in ground floors and pavings n exc 15 cm thick (above or below the ground level) complete all as spcified and directed.
Dismantling floors, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as spcified and directed.
Taking up or down 15mm bore steel tubing and connections complete all as spcified and directed.
Taking up or down 20mm bore steel tubing and connections complete all as spcified and directed.
Taking down old PVC (SWR) pipes, 75 /110 mm dia fixed on walls complete all as spcified and directed.
Taking down old CI floor traps with waste pipe of length approximately 3.20 meter embedded in concrete and making good the disturbed portions with PCC 1:2:4 type B1 including providing PVC floor trap of size 75 mm complete all as spcified and directed. Note : S&F of waste pipe will be measured and paid separately in relevant items here in after.
M&L for Screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as spcified and directed.
M&L 25 mm thick cement concrete 1:2:4 type B0 using 12. 5mm graded aggregate as in sub base of floors all as specified.
M &L for Non-skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as spcified and directed.
M &L for Virified tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as spcified and directed.
M &L for Virified tiles 10 mm thick dark shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as spcified and directed.
S&F of toilet paper holder as in repairs brass chromium plated complete all as spcified and directed. Make jaquar Cat No- 1151 N
Supply & fixed in repair CP soap dish as per sample kept in GE’s office complete all as spcified and directed. Make L&K code no-SP-0777
S&F grating doom 125 mm dia with waste hole of CP (minimum weight 40 gms) all as spcified and directed.
Supply and fix in repairs 15mm dia bib tap, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe all as specified and as directed.
Supply and fix in repairs15mm dia stop valves, cast copper alloy, fancy type chromium plated with long shank and cub (concealed type) high pressure with crutch or butterfly handle, screwed down, screwed for iron pipe all as specified and as directed.
Supply and fix in repairs 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe all as specified and as directed.
Supply and fix in repairs brass chromium plated shower rose with or without swivel joints, 125mm size including fixing to 15mm dia steel pipe, all as specified and as directed.
Supply and fix in repairs low level PVC flushing cistern white complete with syphonic action type 10 litre capacity including float valve handle, bracket, PVC flush down pipe 32mm dia as required with bend, PVC connection 450mm long with PTMT nut and washers etc complete all as specified and as directed.
Supply and fix in repairs vitreous china wash down water closet pan (pedestal pattern), excluding flushing cistern and flush pipe), including fixing to existing 125/110mm size PVC (SWR) P trap etc complete all as specified and as directed.
Supply and fix plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated hingeing device all as specified and as directed.
Supply and fix in repairs stainless steel, tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed with chromium plated brass screws all as specified and as directed.
PVC connections 15 mm size with PTMT nuts of length 450 mm all as spcified and directed.
S&F in repairs Viterous china wash hand basin white flat back size 450 x 300 mm excluding taps, waste , chain and plug and porcelain stopper but including brackets etc all as specified
S& F steel tubing medium grade with all fitting and fixtures complete to walls and or laid in floors 15mm bore complete all as spcified and directed.
S& F steel tubing medium grade with all fitting and fixtures complete to walls and or laid in floors 20 mm bore complete all as spcified and directed.
S & F PVC (SWR) pipes single sockted in any length with rubber ring joints laid fixed to walls 110 mm bore all as spcified and directed.
S & F PVC (SWR) pipes single sockted in any length with rubber ring joints laid fixed to walls 75 mm bore all as spcified and directed.
S&F of PVC (SWR) bends any radius 110 mm bore all as spcified and directed.
S&F of PVC (SWR) bends any radius 75 mm bore all as spcified and directed.
S & F brasschromium plated health faucet with hand held and spring operated control valve with PVC flexible pipe connection of suitable length as directed fixed to 15 mm bore pipe all as spcified and directed. Make : Jaquar Model No: ALD-CHR- 585 or equivalent in Dolphin/ Zoloto
Preparation of old steel surface over 10 cm in width or girth and applying one coat of synthetic enamel paint all as spcified and directed.
M & L for Preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.
Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube. A minimum of 6Nos screws to be provided for each frame all as specified and as shown in SSR part II drawing on page No. 160 and as directed. Note: The quoted rates are deemed to be included for cutting holes, providing concrete for hold fast and making good to the disturbed surfaces.
Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified, shown in SSR part II drawing on page No. 156 and as directed.
S & F 100 mm size Butt hinges medium weight cold rolled mild steel all as spcified and directed.
S & F 200 mm size Aluminium anodised barrel tower bolts of extruded section all as spcified and directed.
S&F 150 mm size Extruded aluminium alloy handles fabricated type anodised all as spcified and directed.
S & F 200 mm long aluminium alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as spcified and directed.
M&L for Plain cement concrete 1:3:6, type C 2 using 40mm graded stone aggregate), 75mm thick laid in panels incl necessary form work as in plinth protection all as spcified and directed.
M&L for preparation of old surface applying two coats of cement base paint all as specified and directed
S & F , 1st class hard wood external teak wood leaping, 6mm thick to 18 mm thick plywood or veneered particle board, fixed with nails complete.
M&L for providing and injecting along the external wall below concrete or masomy apron using chemical emulsion @ 2.25 litres per linear meter including drilling and plugging holes etc. in apron etc complete all as spcified and directed.
M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12 mmdia )holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors and all specified.
M&L for providing and injecting at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same all as spcified and directed.
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in hard / dense soil.
M & L for brickwork with subclass flyash bricks, straight or curved on plan exc 6m mean radius built in Cement mortar 1:4 as in man holes all as specified and directed.
M & L for PCC 1:4:8, type D2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete all as specified and directed.
M & L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in 150 mm bore pipes complete all as specified and directed.
M & L for PCC 1:2:4 type B2 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.
M & L for precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in cover slab for manhole, septic tank, etc, set in CM 1:6 including necessary form work, moulds, etc, complete all as specified and directed.
M & L for 15 mm thick Rendering in CM 1:4 on fair faces of brick wall surfaces finished even and smooth without using extra cement all as spcified and directed.
S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as spcified and directed.
S & F 150 mm bore UPVC (SWR) pipes single sockted in any length with rubber ring joints laid in trenches complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in Hard / dense soil complete all as specified and directed.
Removing building material out side the campus including loading and unloading etc., to a distance exc 5.0 Km but not exc 10.0 Km out side the MD land ( Ministry of Defence) where responsibility regarding place of deposition and permission from all authorities etc., in this regard will be of contractor and all as specified. Note : Location and Permission of deposting the disposal out side the MD land shall be rest with contractor at his own arrangement.
Demolition and breaking up drain pipes of 150 mm internal dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar all as spcified and directed.
Material and labour for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put togather with glue pinned at joints all as specified and as directed.
Supply and Fix Factory made second class hard wood (rail and style) plain framed panelled shutters 35 mm thick (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of the rail and style shall be as per IS 1003 (Part I) kiln seasoned and chemically pressure treated all as specified and directed
M&L for Preparation of new wood or wood based surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed
Taking down chowkhats or frames (with out taking off the shutters from the frames) size exc 1.50 sqm and not exc 4.00 sqm each and all as specified and directed.
Taking down chowkhats or frames (with out taking off the shutters from the frames) size not exc 1.50 sqm each and all as specified and directed.
Taking down shutter of any description area exc 1.00 sqm but n.exc 2.00 sqm each complete all as specified.
Taking down wooden shutter of any description, size not exceeding 1 Sq.m each all as spcified and directed.
S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel wire staples all as spcified and directed.
S&F in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel wire staples all as spcified and directed.
S & F in repairs fancy type curtain rails 20mm dia chromium plated with fixing brackets, stops, rollers etc.including taking down existing curtain rod/ palmate box of any description and any position etc all as specified and directed.
M&L 30mm thick glazed and skeleton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc complete provided with stiles and rails as specified in SSR part-I section 8 clause 8.24 (b) complete all as spcified and directed.
S & F in repair steel windows or ventilators side hung shutters including projecting type hinges with steel handle and steel peg stay complete with galzing bars dovetailed or welded etc complete all as specified.
M & L for Framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 all as spcified and directed.
S&F of 3- layer PP-R Polypropylene random copolymer) concealed Outer diameter of pipes in 32 mm dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water apply all PP-R plain & brass threaded polypropylene random fittings laid in floors,wall and ceilling etc all as spcified and directed.
S&F of 3- layer PP-R Polypropylene random copolymer) concealed Outer diameter of pipes in 15 mm dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water apply all PP-R plain & brass threaded polypropylene random fittings laid in floors,wall and ceilling etc all as spcified and directed.
S&F of 3- layer PP-R Polypropylene random copolymer) concealed Outer diameter of pipes in 20 mm dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water apply all PP-R plain & brass threaded polypropylene random fittings laid in floors,wall and ceilling etc all as spcified and directed.
S&F of 3- layer PP-R Polypropylene random copolymer) concealed Outer diameter of pipes in 25 mm dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water apply all PP-R plain & brass threaded polypropylene random fittings laid in floors,wall and ceilling etc all as spcified and directed.
M&L UPVC pipe of pressure 10 kgf/cm 2 suitable for water supply distribution incl all fittings,20 mm dia all as spcified and directed.
M&L UPVC pipe of pressure 10 kgf/cm 2 suitable for water supply distribution incl all fittings, 15 mm dia all as spcified and directed.
S&F of Mosquito Insect Screen and Windows Pdr coated hallow tube coloured frame assembled with metal components such as solid metal corners, adjustable track hinges, flexible pvc beadings and flexible magnetic strips Profile with stainless steel mesh 304 grade including aluminium hinges 75mm size, center big middle ,handle 75mm size ,PVC lock with stopper Sleek profile Channel with powder coated profile - Alloy AL 6063 * Sleek size - 3/4inch x 0.9mm - 12 feet * Sleek channel weight - 510grm * Actionable powder coating * Box frame aluminium channel with powder coated * Box frame size - 1.5 x 1 inch - 12 feet * Box frame weight - 1.400g, complete all as spcified and directed.
S/F sheet glass ordinary quality 3 mm thick, in squares n.exc. 0.50 Sqm in each pane including necessary new oil putty or with existing metal beadings complete and hacking out old broken panes all as spcified and directed.
S&F Sheet glass,5.00 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane all as spcified and directed.
Surface excavation not exc 30cm deep and averaging 15 cm deep and getting out in hard/dence soil all as spcified and directed.
M&L hardcore of gauge not exc 63 mm deposited spread and leveled in layers not exc 15 cm thick watered and rammed to a true surface complete all as spcified and directed.
M&L 75 mm thick PCC 1:4:8, type D-2 using 40 mm graded stone aggregate as in sub base all as spcified and directed.
M&L for Sand / M Sand filling under floors or in foundations including watering and consolidation Spreading and levelling in layers n exc. 25 cm thick and all as specified and directed .
M & L for Machine Pressed Precast rubbermoulded concrete interlocking Paver Block any shape, size,colour or design, confirming to 15658-2006 of 60mm thickness, M-30 Grade and all as specified and directed .
M&L for chequered cement concrete tiles 25cmx25cmx25mm thick , with grey cement and pigment set jointed and pointed in neat cement slurry in floors including 20 mm thick screed bed or beding layer in cement mortar 1:6 complete all as specified
M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in surface channels and drains all as specified & directed.
M&L for Plain cement concrete 1:4:8 type C2 using 40 mm graded stone aggregate for concrete bed to drain pipes (work in foul condition) including packing under and hunching against the sides of pipes after they are laid and tested for 150 mm dia pipes complete all as specified and directed.
M&L for Brick work with fly ash bricks, straight or curved on plan exc 6 meter mean radius built in cement mortar 1:6 as in manholes complete all as specified and directed.
M&L for PCC 1:3:6, type C1 using 20 mm graded stone aggregate for coping and benching inside the manholes including weathering, slightly rounded or chamfered angles and throating and including necessary formwork complete all as specified and directed.
M&L for Precast cement concrete 1:2:4, type B1 using 20 mm graded stone aggregate as in cover slab for manholes set in cement mortar 1:6 complete all as specified and directed. Note: Reinforcement will be measured and paid separately (use and waste of form work is deemed to be included).
M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick wall surfaces, finished even and smooth using extra cement complete all as specified and directed. .
M&L for extra form farming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds ,mitred stopped ends etc all as spcified and directed.
S&F PVC SWR pipes, 150 mm bore, single socketed in any length with rubber rings joints, laid in trenches complete all as specified and directed.
S& F in repairs PVC waste pipe 32mm bore for ,WHB,and Sink all as spcified and directed.
S&F of Anodised aluminium window and ventilator shutters, side hung type without sash bars, almuiniunlsections weighing 0.55 kg( m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mmlong (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified
S &F forming construction joints (Dummy) joints 65mm deepx10mm wide filled with sealing compund Grade "A" all as spcified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames of stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and directed
S&F Floor Door Stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floors 140 mm complete all as specified.
Supply and fix PVC bathroom cabinet of size 450 x 550mmx125mm, mirror on the front side upon opening the cabinet with shelves and hinged cover all as specified and as directed. Make : Parryware / Kohinoor/ Sintex,Nilkamal
Taking down carefully the point wiring (light, Fan, socket or power) complete, (fittings such as switches, sockets any type, ceiling roses, pandents, light fittings, etc.to be measured seperately) removing materials for keeping in safe custody or for taking credit( credit for above items should be made as per conditions separately) and all as specified.
Taking down ceiling fan, sealing cable end, dismantling blades from fan and keeping in safe custody for reuse at site and complete all as specified and as directed.
Taking down exhaust fan, sealing cable end, dismantling blades from fan and keeping in safe custody for reuse at site and complete all as specified and as directed.
Hanging/ refixing only ceiling fan and connecting up including provision of cable from celling rose/ connector to fan all as specified and as directed.
Refixing only exhaust fan and connecting up including provision of cable from celling rose/ connector to fan all as specified and as directed.
M& L for painting of ceiling fan/ exhaust fan complete, in situ with synthetic enamal paint by spraying incl filling cavities with filler, one coat after cleaning all dust etc all as specified and as directed.
M&L for concealed point wiring complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through and including 20mm dia PVC rigid non metallic conduit with all accessories such as internal bend end caps etc complete including pressed steel sunken boxes 2 mm thick concealed in walls including 3 mm thick phenolic laminated sheet cover and including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor connected with dolly, all as specified and as directed for the following :- Note: ( Cutting chases and making good in wall / floor will be Measured and paid seperately.
One light point controlled by one, one way switch.
One ceiling / exhaust fan point controlled by one, one way switch.
One 05 Amps socket outlet point on same board.
One 05 Amps socket outlet point on independent board.
One Bell point controlled by one, one way Bell push button.
All as per item No. 146 described here-in-before but with copper conductor cable FRLS, 2.5 Sqmm for one 3 pin socket outlet, 15 Amps and including 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board.
Note for item Nos. 146 &147 : Cutting chases and making good in wall / floor will be Measured and paid seperately.
Supply and fix ceiling rose surface type bakelite 65 x 50mm with three terminals.
S&F Switch piano, flush type single pole, one way 05 Amps complete all as specified and as directed.
S&F Switch piano, flush type single pole, one way 15 Amps complete all as specified and as directed.
S&F Bell push, flush type 06 Amps, complete all as specified and as directed.
S&F Socket outlet 3/5 pin, 06 Amps, flush type complete all as specified and as directed.
S&F multi socket outlet , 2 in 1, 3 pin, 16 Amps, flush type complete all as specified and as directed.
S&F step type,electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and as directed.
Supply & fix LED mirror light helios 11 watt all as specified and as directed. Make: Luker Cat No. LMR9 or equivelent
Supply & fix environment friendly, ultra modern, energy saving surface mounting decorative oval shape bulk head edge-lit LED luminaries 12 watt comprising of high brightness LED complete all as specified and as directed. Make : Luker, Cat No.LBKOVSL04 or equivelent.
Supply & fix universal regal LED batten with LED tube 1x20/22 watt surface mounting tube light fitting complete and making connection complete all as specified and as directed. Make: Havells Cat No. BATTENT8UPTO1x22WSSBSWH with LED Tube rod Havells Cat No. CRYSTAL1213T8DSTL20WLED865SGLASS or equivelent in crompton/ C&S
S&F lamp holder, PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.
S&F LED Lamp 09 Watt White with B-22 cap complete all as specified and directed . Make Luker Cat No-LBPC09CL or Equivalent in Havells, Crompton.
Taking down old unserviceable submain wiring of any size including GI/copper earth continuity conductor in PVC conduit on wall/roof and making good to disturbed surfaces all as directed.
M&L for concealed Sub main wiring complete with 2 runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories concealed in wall/Ceiling etc including making recess and making good the disturbed surfaces to match with existing surfaces all as specified and as directed. Note :- 2 runs of 6 sqmm, 1 run of 6 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length.
S&F single pole and neutral enclosure, 240 volts with a two pin and earth plug and socket complete with one single pole MCB 20 Amps all as specified and as directed.
S&F Bell multi music type , single pole, AC, 230 volts complete all as specified and directed.
Supply and fix MCB DB, SPN, 12 ways, Isolated neutral bar, IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 complete all as specified and as directed.
Supply and fix MCB SPN 63 Amps, 240Volts, 10 KA, "B" Curve complete all as specified and as directed. Make: Indoasia or equivelent in Havells/Standard
Supply and fix MCB SP 6 to 32 Amps, 240Volts, 10 KA, "B" Curve complete all as specified and as directed. Make: Indoasian or equivelent in Havells/Standard
M & L Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 M below ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt , earth lead GI wire 4mm dia ( 8 SWG) connectd to GI earth plate elcectrode by means of bolts, nuts, check nuts, washers of galvanised iron, thimbles and other end of earth wire connected to main switch board and protected by galvanised iron pipe medium grade 15mm bore and 20mm bore medium grade GI pipe with funnel and wire mesh for watering including necessary excavation and earth works. PCC Chamber in cement concrete 1:3:6 type C-2 & RCC cover in M-20 (Design mix ) and all as shown in Electrical Plate No. 3 of SSR ( Part-I) of 2009. (i) The unit rate includes earthing wire, and protection pipe upto 7.5 metre.
M&L for 4 mm dia galvanised iron or steel wire as earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required complete all as specified and as directed.
Disconnecting carefully electric energy meter single phase and keeping aside , and re-fixing the same after necessary wiring work complete all as specified and as directed.
Disconnecting carefully old unserviceable distribution boards any sizes including MCBs complete and making good the disturbed surface of wall complete all as specified and as directed.
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.
Dismantling of old existing water tanks, cpacity exc 500 ltrs but not. exc 1000 Ltrs complete all as specified and as directed.
Disconecting, taking up or down steel tubing/hot water pipe and connections of size 25 mm dia complete all as specified and as directed.
Supply & fixing to the walls or ceiling or laying in floors GI water tubing medium grade with all fittings and fixuters of size 25 mm dia bore complete all as specified and as directed.
Supply and fix gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends for iron pipes 25 mm size.
S&F rotational moulded polythylene water storage tank 1000 ltrs capacity (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etc complete all as specified and directed.
Supply and fix Ball brass valves, high pressure, with polythene, float and flynut complete, screwed for iron pipe or brass ferrule and fixed of size 25 mm dia complete all as specified and as directed.
TECKXPERT ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .