UNDERTAKING OF CIVIL WORKS INCLUDING PAINTING, FIXING, INSTALLATION OF AL. PARTITIONING / DOORS / UPVC WINDOWS, FALSE CEILING, ACS AND OTHER ALLIED ACTIVITIES

Amount

UNDERTAKING OF CIVIL WORKS INCLUDING AL. DOORS / PARTITIONING, FALSE CEILING,PAINTING, SUPPLY & INSTALLATION OF AIR CONDITIONERS ETC., ON TURN-KEY BASIS.

CANOPY AT ENTRANCE: FABRICATING AND ERECTING COVERED PARKING WITH 3.5 INCHES ROUND PIPES OF 3 MM THICK AND 80 x 40 MM ALROUND BASE OF TRUSS AND 60 x 40 MM TUBE OF 2MM FOR OTHER TRUSS MEMBERS 40 x 40 MM BRACINGS, AND PURLINS OF 25 x 25 MM SQ TUBE, MS POSTS EMBEDDED BELOW IN CONCRETE ROOF AND LAYING AND FIXING OF PPGI COLOR COATED SANDWICH ROOF PUF PANES WITH AS PER STANDARD PROCEDURE. PPGI SHEET THICKNESS IS 0.5MM PPGI COLOUR ROOF PUF PANEL THICKNESS IS 100 MM NOTE: SHEET COLOUR WILL BE DECIDED BY C-DOT

SS RAILINGS: PROVIDING AND FIXING STAINLESS STEEL (GRADE 304) RAILING MADE OF HOLLOW TUBES, CHANNESL, PLATES ETC. INCLUDING WELDING, GRINDING, BUFFING, POLISHING AND MAKING CURVATURE (WHEREVER REQUIRED) AND FITTING THE SAME WITH NECESSARY STAINLESS STEEL NUTS AND BOLTS COMPLETE, FIXING THE RAILING WITH NECCESSARY ACCESSORIES AND STAINLESS STEEL DASH FASTENERS, STAINESS STEEL BOLTS ETC., OF REQUIRED SIZE ON THE TOP OF THE FLOOR OR THE SIDE OF WAIST SLAB WITH SUITABLE ARRANGEMENT AS PER APPROVAL OF SITE IN CHARGE. ( FOR PAYMENT PURPOSE ONLY WEIGHT OF STAINLESS STEEL MEMBERS SHALL BE CONSIDERED EXCLUDING FIXING ACCESSORIES SUCH AS NUTS, BOLTS, FASTENERS ETC.) NOTE: RAILING HEIGHT SHOULD BE 3'3". MAKE: ANY ISI APPROVED SAMPLE

MS STAIRCASE: SUPPLY AND FIXING OF M.S. STAIRCASE. TO BE PROVIDED BY USING 40 MM DIA PIPE AND STEPS NOT MORE THAN 9" HEIGHT WITH SIDE RAILINGS WITH 3' x 3' PLATFORM. MAKE: ANY ISI APPROVED SAMPLE

LIGHT FIXTURE: LED LIGHT FIXTURES 2' x 2' RECESSED PANEL LIGHT 2 FT x 2 FT ( COOL WHITE) MAKE: HAVELS / BAJAB / WIPRO / CROMPTON

WALL MOUNTABLE FANS: SUPPLY OF 400 MM 3 SPEED FAN WITH OSCILLATION AND TILT MECHANISM TO DIRECT AIR. AERODYNAMICALLY DESIGNED AND BALANCED BLADES AND 1500 RPM SPEED. MAKE: HAVELS / BAJAJ / USHA / CROMPTON

INTERNAL PAINTING: WALL PAINTING: SCRUBBING THE EXISTING PAINTING WITH SAND PAPER AND MACHINE GRINDING FINISH PROPERLY FOR PREPARING THE SMOOTH SURFACE. PROVIDING AND APPLYING 2 COATS OF WALL PUTTY TO INTERNAL WALL. ALL WALL UNDULATIONS SHOULD BE COVERED UP WITH PUTTY / WHITE CEMENT AND THE WALL SHALL BE BROUGHT TO PROPER LINE AND LEVEL AS PER CDOT REQUIREMENT AND INSTRUCTIONS OF THE SITE IN-CHARGE. WALL PAINTING: PROVIDING AND APPLYING 2 COATS OF EMULSION PAINT. CEILING PAINTING: PROVIDING & APPLYING 2 COATS OF WHITE EMULSION PAINT: MAKE: ASIAN ROYAL EMULSION PAINT

VERTICAL BLINDS FOR WINDOWS: SUPPLY AND FIXING OF VERTICAL BLINDS (BRANDED) FOR WINDOWS: MAKE: ANY ISI APPROVED. SHADE COLOUR TO BE APPROVED BY C-DOT

AIR CONDITIONERS: SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF 2 TON 5 STAR INVERTER TYPE ACS WITH STABILIZER, OUTDOOR UNIT STAND AND NECESSARY POWER CABLE CABLE. COMPLETE TURN-KEY JOB. WARRANTY - 3 YEARS MAKE: LLOYD, VOLTAS, SAMSUNG, LG FOR DETAILED SPECIFICATIONS OF AC PLEASE REFER TO SL. NO. 7 - SPECIFICATIONS - PAGE 7 OF TENDER DOCUMENT.

ADDITIONAL COPPER PIPE, DRAIN, PIPE AND POWER CABLE

SUPPLY & CONSTRUCTING CEMENT ROAD: EXISTING GROUND TO BE BROUGHT TO GOOD LEVEL PCC 40 MM JELLY TO BE USED NOT LESS THAN 6" FOR BETTER BASEMENT SUPPORT, ON TOP 10MM TMT BARS TO BE USED AND GAP 12" x 12" BU USING M25 READY MIX CONCRETE TO BE USED TO FORM A ROAD WITH NECESSARY CURB STONE WITH WATER PROOF PRIMER PUTTY AND WEATHER PROOF OUTDOOR PAINT APEX ULTIMA ON BOTH SIDE ROAD. PAINT COLOUR WILL BE DECIDED BY C-DOT

FALSE CEILING: SUPPLY AND FIXING OF ARMSTRONG FALSE CEILING (2' x 2') AT A HEIGHT OF 10 FEET. MAKE: ARMSTRONG MODULAR CEILING TILES WITH FINE FISSURED REGULAR EDGES OF SIZE ( 600MM x 600MM x 16MM) SUPPLY OF ARMSTRONG 24MM FALSE CEILING GRID SYSTEM

UPVC SLIDING WINDOWS: REMOVING THE EXISTING M.S. WINDOWS AND NECESSARY CIVIL WORK AND SUPPLY AND FIXING OF UPVC 3 TRACK SLIDING WINDOWS (i.e) 2 TRACK WITH CLEAR GLASS AND 1 TRACK WITH MESH) MAKE: ANY ISI APPROVED SAMPLE GLASS THICKNESS: 5 MM(IS 2553:1990) FRAME: 92MM TO 112MM

TOTAL

CRS AND COMPANY

mahesh belle

HAB GROUP

Bidder Name

CRS AND COMPANY

HAB GROUP

mahesh belle