Construction of Additional Accommodation 10 Rooms (Double storeyed) for upgradation of Govt High School Sanasar to Higher Secondary School Sanasar Zone Batote Distt Ramban

Amount

Earth work in excavation by manual means over areas (Exceeding 30 cm and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : All Kind of Soil

Hand Packed Stone filling inculding supply of stones

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Crushed

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level. 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) with 20% boulder

Centering and shuttermg including strutting, propping etc. and removal of form for Foundations: footings, bases of columns etc. for mass concrete

Centering and shuttermg including strutting, propping etc. and removal of form for Foundations: Lintels, beams, plinth beams, girders, bressumers and centilevers.

Centring and shuttermg including strutting, propping etc. and removal of form for Foundations: Suspended floors, roofs, landings, balconies and access platform.

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in superstructure upto floor level

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood

Providing and fixing 35mm panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,all complete as per direction of engineer- in charge. Second class deodar wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. coir veneer board (conforming to IS 14842) 12mm thick

Providing and fixing 35mm glazed shutters for doors, windows and clerestory windows using 1 Okg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class deodar wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 1 Omm diameter bolts, nuts and wooden plugs and em beddings in cement concrete block 30x1 Ox15 em 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size )

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)

12mm Cement Plaster of mix 1 : 6 ( 1 cement : 6 fine sand)

Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 (1 cement: 4 coarse sand) : 25 mm thick

Renewing glass panes, with wooden fillets wherever necessary Glass panes weighing 10 kg I sqm

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/1O sqm

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Reinforcement for RCC work incld straightning, cutting, bending, placing in position & binding all complete (Thermo-mechanically treated bars)

Strctural steel work riveted or bolted in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Providing corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required. 0.63mm thick with zinc coating not less than 27 5gm/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G. I. limpet and bitumen washers complete

Providing and fixing hard board ceiling, sheet of approved quality with necessary nails etc. complete (frame work to be paid for separately) Standard Quality board 6mm thick

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position Second class kail wood

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complet.Fixed to openings I wooden frames with rawl plugs screws etc.

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. Complete 250x16 mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour o shade with necessary screws etc. complete : 150x10 mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 200x10 mm

Providing and fixing aluminium hanging floor door stoppe lSI marked anodised (anodic coating not less than grad AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete Twin rubber stopper

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand . : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mmthick with 20mm nominal size stone aggregate. Crushed

Providing and fixing glass strips in joints of terrazo I cement concrete floor

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth

Carriage of Sand to the site of work by mechanical transport including loading , unloading & stacking complete lead upto 147 km & manual labour 1km

Carriage of stone aggregate to the site of work below 40 mm thick by mechanical transport including loading, unloading & stacking complete lead upto 35 km & manual labour 1km

Carriage of bricks to the site of work by mechanical transport including loading, unloading & stacking complete lead upto 147km & manual labour 1km

Carriage of Cement to the site of work by manual labour including loading, unloading & stacking complete lead upto 1 km

Carriage of Steel to the site of work by manual labour including loading, unloading & stacking complete lead upto 1 km

Bashir Ahmed Wani

Dilber Sohil

M/S MOHD RAFIQ SOHIL

Shah Nawaz

Saima Majeed W/o Kaiser Mir

Choor Singh

MOHD NAFICE MIR

Mohd. Ashraf Zargar

M/s Mohd Firdoos Rather

M/s Tanveer Ahmed Contractor