LLH-Infrastructure Facilities for Staff including Lockers, Benches, Changing Area and earmarked for PwD Staff on Ground Floor and Mezzanine Floor.

A1-Non schedule items (including GST)

Providing and fixing partition to be made of framed alumunium tube 2 inch x 2 inch with 12 mm ply fixed both side finished with 4 mm HPL sheet applied both side with all harder finished etc

French polishing two or more coat on wood complete in all respect. The rate includes the cost of labour , materials , tools & amp plants , required material to complete the work in all respect.

Manufacturing supplying fitting and fixing flash door with frame (size 5inch x 3inch 3 sal wood) of thickness 35 mm and finished with veneer/laminates etc.the plyboard to be used should confirmed ISI 701 including all the hardware materials like door handle,inch (size 5 inches), tower boult, door stopper, schrues, modern mortise lock would be either of Hettich/hafele make and to be approved by the engginer in charge before fixing.

Design & supply of detailed GAD, structural and architectural drawings of "LLH- Provision of Steel Mezzanine Floor in Repair Bay and Construction of Locker Room etc. Complete in all respect as per instruction of Engineer-in-charge. Whenever required design & drawing of suitable 4 type of foundation shall be given. The rate includes supply print out of all required drawings on tracing paper with 05copies of colour print, 01 copy of RTF, design booklet/report(s) in 03 set and one soft copy on pendrive. Design & drawings shall be technically vetted from Govt. Engineering college or any other reputed institution as per direction of Engineer-in-charge. The design & drawing should be prepared on the basis of relevant I.S. Code. Approx. 0.28% of total sum of DSR-2023.

Preparation and submission of Final report giving complete and comprehensive record of investigations, laboratory test reports and calculations in approved format.

A2-Non schedule items

Supply, fabrication, and installation of Stainless Steel Locker of overall size 914 mm (H) x 558 mm (L) x 508 mm (D), manufactured from heavy duty SS 304 grade sheet of suitable gauge, with smooth polished/powder-coated finish, consisting of double doors with central partition. Each side shall be divided into two compartments proportionately as per revised size, with stiffeners 1 for strength and ventilating slots as required. The locker shall be provided with high-quality locking arrangement conforming to Godrej standard system (or equivalent), complete with hinges, handles, and locking hasps. The unit shall be mounted on 150 mm high SS tubular legs with base plates for firm support. Work shall include supply of all materials, consumables, labour, welding, grinding, polishing, finishing, tools & tackles, transportation, and installation at site, all complete as per drawing, specification, and direction of the Engineer-in-Charge.

Supply, fabrication, and installation of Stainless Steel Bench of size 3048 mm (L) x 483 mm (W) x 457 mm (H), fabricated from heavy duty SS 304 grade sheet and square tubular 2 sections of suitable gauge, with top made of polished stainless steel sheet duly reinforced with stiffeners for adequate strength, mounted on SS tubular legs with base plates for firm support, edges rounded and joints ground smooth, including all materials, consumables, labour, welding, polishing, finishing, tools & tackles, transportation and installation at site, all complete as per drawing, specification and direction of the Engineer-in-Charge.

B1-Schedule Items as per CPWD DSR-2023

C2-As per CPWD's-Horticulture-2020