Construction of Proposed Escape Head Regulator off taking at RD 63800 mtr (R S) (u s) of Aqueduct at RD 64108 mtr of Kandi Canal Stage 2, Hoshiarpur

Amount

Dismantling brick work tile, masonry or tile lining In cement

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil. In Ordinary soil by Mechanical Means of Depth 3 m to 6 m

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade M20 and Height upto 5m with Batching Plant Transit Mixer and Concrete Pump

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade M25 and Height upto 5m with Batching Plant Transit Mixer and Concrete Pump

Dressing side slopes and preparation of sub grade for lining.

Dressing bed and preparation of sub grade for lining.

Putting 1:3 (Cement:water) cement slurry with cement @ 2.25 kg per sqm on prepared bed and side slopes before laying concrete on bed and side slopes

Cement concrete lining 75mm. thick or less laid manually for irrigation channels, using cement concrete M-15 with cement content 325 kg/cum mixed in an automatic computerized Batching & Mixing Plant and transported to the site in transit mixers with an average lead of 1Km(FOR TRAPEZOIDAL SECTION AND CUP SECTION OF ALL RADII)

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Cement concrete 1:2:4 With stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type

Weaving wire netting for wire crates including binding sides and partitions to make crate of 15 cm x 15 cm or 25 cm x 7.5 cm mesh.

Filling stones or spalls into crates and hand packing

Stone or Kankar block pitching On slopes of guide bandh and protection works

Providing 7 watt LED based SPV Street lighting system with 160 Wh lithium ferro phosphate battery.

Providing skin plate of gates (8 mm) of desired shape and size complete in all respect and to entire satisfaction of engineer in charge.

Providing and fixing of structural steel work complete in all respects and to entire satisfaction of engineer in charge.

Providing & Fixing MS Plate of various sizes complete in all respect and to entire satisfaction of engineer in-charge.

Steel casting as per I.S. specification & grade complete in all respects and to entire satisfaction of engineer-in-charge.

Providing & Fixing MS Pipe of various sizes complete in all respect and to Entire satisfaction of engineer in-charge.

CR.Sr.no13 Providing & Fixing of Galvanizesd nut & bolt of all length & size

Providing chequred plate 8mm thick of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge.

Drilling/Boring hole including rimming complete in all respects and to entire satisfaction of Engineer-in-charge

Providing of hollow bulb seal( Side Seal ) and fixing of position including prepration of the surface complete in all respect and entire satisfaction of engineer in charge

Providing and Fixing in Position of flat/wedge seal including preparion of surface complete in all respects and to entire satisfaction of Engineer-in-charge size 80x12mm.

Supply of Multipurpose synthetic Grease Complete in all respects and to entire satisfaction of engineer-in-charge.

Supply of Multigrade Mobile oil 10w-40 or 10w-50 Complete in all respects and to entire satisfaction of engineer-in-charge.

Providing High Speed Diesel

Labour for Oiling and greasing of gates

Fillet Welding with high strength steel rods complete in all respects and to entire satisfaction of enginer incharge (i) 6 mm wide.

CI Housing Cover with worm & worm wheel assembly shaft ,Handle GM Bust with triple start threading inside for spindle complete including labour charges

Providing and Fixing MS Spindle of 1.5 Ton Capacity

Providing and Fixing GI pipe of 1.5" dia complete in all respects and to entire satisfaction of Engineer-in-charge

Commissioning and testing of gates at site complete in all respect and to entire satisfaction of engineer in charge.

Cranes 35 tonnes

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Finishing with epoxy paint two or more coat at all locations prepared and applied as per manufacturer specifications complete.

Supply of boulder stone as per PWD specification from govt. approved quarry to stack and yard with an average lead upto 78 km from Mirthal including carriage loading unloading etc. complete in all respect.

The Lambra Co Operative L and C Society Ltd