Providing and Fixing Wooden Partition and Interior Furnishing Work for Office of The Executive Engineer, WD-I in Div-V Building (1st floor) at Altinho Panaji .

Providing & Fixing partitions with frame work of 4"x4" matti wood spaced horizontally & vertically @ 1.20m C/C and top fixed with of 19mm thick marine ply on both sides and ply laminated above table desk top with Pine wood laminate of 1mm thick of approved design including providing & fixing 20mm thick first class I.T.W Beading/lipping for edges including French polishing etc. complete as per the drawing. ( 19mm thick Marine ply shall conform to IS 710-1976 & 1mm thick laminate of suede (SF) surface shall conform to IS 2046-1995. All the above materials shall be of first quality)

Providing and fixing of Low/ Full height cupboard of various sizes with 19mm thick marine ply and shelf with equal depth fixing with top finished with 1mm thick laminate matt finish with 5mm thick teak wood beading. M.S chrome plated buff finished handle including melamine polish etc complete as per Architectural drawing

Providing and fixing 20 mm thick bison board panelling with necessary screws etc. complete

Steel work in built up tubular (round square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL TATA. VIZAG JSW APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc. including cutting hoisting fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc. complete.

PARTITION:-;Providing & fixing Partitions Yashashri make or equivalent made out of frame support structure in 2x 1 M.S. sq tube & walls paneled by 20mm x 155mm x 1.2mm Upvc multi cavity section fixed on structure with hidden screwing system. Door frame & shutter made out of 50mm x 50mm x 2.5mm & 31mm x 150mm x 1.5mm Upvc multi cavity section. Some portion of partition can be made by 4mm fixed glass. The average weight of Partition is 17 kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods

TURNWINDOWS:-;Providing & fixing Single or multi shutter turn windows Yashashri make or equivalent made out of upvc multi- cavity frames Sections of 60mm x 60mm x 2.5mm reinforced with G.I channel and double multi-shutters Division are made by using shash mullion having 50mm x 64mm x 2.5mm multi- cavity upvc section reinforced with G.I. channel and shutters are made out of 50mm x 64mm x 2.5mm upvc section Reinforced and welded in corners with EPDM Gaskets and using suitable glass bead with perfect hardware like hinges handles stays & 4mm clear Glass. Some portion of windows can be made fixed glass. The average weight of Turn window is 11.5 kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods.

Providing and fixing 19 mm thick block board partition and 1mm laminate of required design on both sides including providing and fixing beading for edges including polishing etc. complete. All above material shall be of first class quality.

Providing of office table of Godrej or equivalent make, made up of metallic structure and top of plywood fixed with laminate. (Size- 1.36m x 0.68m)

Supply of High back executive chair of Nilkamal or equivalent make.