REPAIR TO SANITARY FITTINGS, FLOORING, CHAJJA AND ROOF TREATMENT MD ACCN UNDER AGE B/R II AT NEW CANTT PRAYAGRAJ

Amount

Dismantling, floor hearth or wall tiling including cement mortar bedding and removing rubbish complete all as specified and directed.

M&L for non skid, ceramic coloured tiles of premium or first quality, 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for non skid ceramic coloured digital tiles first and premium quality, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured digital tiles 300 mm x 450 mm or 300 mm x 600 mm first and premium quality, 7 to 8 mm thick in vertical surfaces skirting, dados, risers to steps, etc and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed.

M&L for vitrified Ceramic light shade double charged tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F vitrified tiles, coloured, double charged, superior quality 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in vertical surfaces such as dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Cleaning and removing all scale and dirt etc from water storage tank of size exc 250ltr but n.exc 500 ltrs capacity and from mouth of circulating pipes etc and writing date of cleaning of the tank with paint 75 mm height in DD/MM/YY pattern and refixing the cover after cleaning all and specified and directed.

Cleaning and removing all scale and dirt etc from water storage tank of exc 500ltr but n.exc 1000 ltrs capacity and from mouth of circulating pipes etc and writing date of cleaning of the tank with paint 75 mm height in DD/MM/YY pattern and refixing the cover after cleaning all and specified and directed.

S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms) complete all as specified and directed.

S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 15 mm bore (minimum weight 142 gms), complete all as specified and directed.

S&F in repair Brass spindles for 15mm size bib taps, Stop cocks etc complete all as specified and directed.

S&F in repair central hole wash hand basin mixer 15mm dia ,chromium plated brass with casted swinging spout including plugging and securing to walls complete all as specified and directed. Make: Jaguar Cat Part No. CON-319KNB or Equivalent make as specified in P.S.

S&F in repair plastic water closet seat white/coloured, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F single piece WC of size 360x460x685mm with PP soft close seat cover, Hinges, Dual flush cistern fitting, fixing of accessories complete all as specified and directed. Make: Jaguar Cat Part No. SLS-WHT-6851S110PP or Equivalent make as specified in P.S.

S&F in repair PVC flush pipe, 32mm dia for low level flushing cistern complete all as specified and directed.

S&F in repair PVC hinging device for seat cover of EWC complete all as specified and directed.

S&F in repair two way bib taps with wall flange 15mm bore, fancy type, quarter turn, brass chromium plated, long body with capstan head and cup screwed down, screwed for iron pipe or for brass ferrule including accessories complete all as specified and directed. Make: Jaguar Cat Part No. ARI-39041BN or Equivalent make as specified in P.S.

S&F in repair bib taps with wall flange ( weight of each bib tap should not less than 0.575kg) 15mm bore, fancy type, quarter turn, brass chromium plated, long body , screwed down, screwed for iron pipe or for brass ferrule including accessories complete all as specified and directed.

S&F in repair angle valve with wall flange (weight of each should not be less than 0.40kg) 15mm bore, fancy type, quarter turn, brass, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions complete all as specified and directed.

All as per Srl item No.18 here-in-above but two way complete all as specified and directed. Make: Jaguar Cat Part No.CON-041KN or Equivalent make as specified in P.S.

S&F rubber door seal 5mm thick,32mm wide, with Aluminium strip of size 19mm thick fixed with machine steel screw with washer complete all as specified and directed

S&F in repair 15 mm dia hand shower size 120mm round shape Multi flow with cascade effect ABS body & face plated chrome with rub it cleaning system complete all as specified and directed.

S&F in repair wall mixer, brass chromium plated, with Telephonic shower and flexible pipe, wall flanges, fancy type and fixed complete all as specified and directed. Make: Jaguar Cat Part No. FLR-CHR-5217N or Equivalent make as specified in P.S.

S&F in repair Tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified. Make: Jaguar Cat Part No. ACN-1111SM or Equivalent make as specified in P.S.

S&F in repair Brass chromium plated shower rose 150mm x150mm size with 300mm long shower arm complete all as specified and directed. Make: Jaguar Cat Part No.BOS-34 or Equivalent make as specified in P.S.

S&F in repair sheet glass shelf assembly 60cm long, 12cm wide, made out of 5.5 mm thick glass with CP bracket guard and railing, fancy type, fixed to plug with CP screws and cup washer complete all as specified and directed.

S & F in repair corner glass self assembly complete all as specified and directed. Make: Jaguar Cat Part No. ACN-1173 or Equivalent make as specified in P.S.

Supply only 32mm bore PTMT waste pipe of best quality, 600mm long for sink/ WHB etc complete all as specified and directed.

S & F in repair 32mm bore Stainless steel waste coupling for SS sink / WHB etc with rubber washer ,plug etc complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exc 1.50 Sqm but n. exc 4sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area n exc 1.50 Sqm but each complete all as specified and directed.

Taking down shutters of any description not exc. 1.0 Sqm each leaf complete all as specified and directed.

Taking down shutters of any description exc. 1.0 sqm but not exc. 2.0 Sqm each leaf complete all as specified and directed.

Refixing shutters in the same opening of any description not exc. 1.0 Sqm each leaf including easing and adjusting complete all as specified and directed.

Refixing shutters in the same opening of any description nexc. 1.0 sqm but not exc. 2.0 Sqm each leaf including easing and adjusting complete all as specified and directed.

S&F factory made Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, supplying and fixing in opening with fittings as per specification & drawing complete.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for Top & bottom rails. MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in frame at site as per specification & shown on drawing in SSR-Part II complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ chowkhat of size 50 X 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note:- (i) M.S. hold fast/ lugs or stainless steel dash fasteners shall be paid separately. (ii) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified & directed. Note: stainless steel butt hinges and necessary stainless steel screws shall be paid separately

S&F 30mm thick factory made wire mesh solid WPC door shutter consisting of density 650 Kg /Cum manufactured by an ISO-9001-2015 certified Company , door to be panelled with stainless steel mosquito Mesh and XTN aluminium mesh for additional strength and safety purpose, confirming to IS:4020. The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm x 25mm x 2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardware’s should be fixed with 19 x 6mm size steel screws etc. complete all as specified & directed & manufacturer's specification.

S& F ACECO 4000 Series double shutter (glazed and gauged) steel windows and ventilators with guard bars, fabricated from roll formed sections made of mild steel sections including 5 mm thick plain glass as in glazing for glazed shutters and stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete for gauged shutters, fitting and fixtures complete all as specified & directed.

S&F 35mm thick Glazed and skeleton window shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers . fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified & directed.

S&F 100mm long Aluminium anodised butt hinges complete all as specified and directed.

S&F 125mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

Supply only 75mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handle, fabricated type, anodised, fixed with screws complete all as specified and directed.

S&F 100mm size extruded aluminum alloy handle, fabricated type, anodised, fixed with screws complete all as specified and directed.

S&F 100mm long aluminum anodized barrel tower bolt of extruded section, fixed with screws complete all as specified and directed.

S&F 150mm long aluminum anodized barrel tower bolt of extruded section, fixed with screws complete all as specified and directed.

S&F 200mm long aluminum anodized barrel tower bolt of extruded section, fixed with screws complete all as specified and directed.

S&F 200mm long aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections suitable for use with pad lock complete all as specified and directed.

S&F 300mm long aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections suitable for use with pad lock complete all as specified and directed.

S&F Steel ventilators, fixed type, with glazing bars complete all as specified and directed

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F window guard bars, plain let in and fixed independently in wooden frames L or T section support for shelves etc., and similar articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed

M&L for applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete.

Hacking out old broken glass (any thickness size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with wooden beads complete all as specified and directed.

M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for 4mm thick figured glass pin head type and glazing with oil putty or wooden beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed.

Supply and fix/fabrication in repair kitchen cabinet & wardrobe/ cupboard made out of 16 to 18 mm thick PVC board plain sheet complete. Make: Rajshree or equivalent all as specified and approved by Accepting Officer. Note: Kitchen accessories ie baskets, cutlery baskets, fittings and fixture will be measured and paid separately as supply only

S&F in repair kitchen cabinet & wardrobe/ cupboard made out of 16 to 18 mm thick PVC board laminated sheet complete all as specified and directed.

S&F of 1st class hard wood leaping,6mm thick,18/19mm wide fixed with nails to timber surfaces complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finished or electro galvanised with width of flap 30mm (when open) complete all as specified and directed.

S&F magnetic catches with steel body 'H' type fixed to shutter complete all as specified and directed.

S&F 100mm size fancy type polished steel handle, fixed with screws complete all as specified and directed.

S&F in repair 2nd class hard wood plain fillets square rectangular or triangular in section, sectional area not exc 03 sq cm, wrought on exposed faces fixed with nails complete all as specified and directed.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified and directed.

M&L for E-board tiles ceiling on GI powder coated channel/Tee/Grid frame work with the following specification including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0/Cement mortar 1:3 complete all as specified and directed with following:- (a) M&L plugging to wall around the rooms & supplying & fixing GI powder coated angle of size 25x25mm. (b) S&F 1.60 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling with dash free fasteners. (c) S & F GI powder coated tee as in main & cross members at 595 mm centre to centre supported suspenders alongwith adjustable clamp to maintain level. (d) S & F E-board ceiling tiles of size 595 mm x 595mm x 4mm thickness, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE.

S&F in repair unbreakable chrome finish corner shelves 300mm/ 200mm size complete all as specified and directed.

S&F in repair 2nd class hard wood plain fillets square rectangular or triangular in section, sectional area exc 6 sqcm but not exc 13 sq cm, clean sawn on exposed faces fixed with nails complete all as specified and directed.

S&F in repair 2nd class hard wood plain fillets square rectangular or triangular in section, sectional area exc 13 Sqcm but not exc 25 sq cm, clean sawn on exposed faces fixed with nails complete all as specified and directed.

M&L for preparation of newly wood or wooden based materials surface of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old wood or wooden based materials surface of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in repair galvanise mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repair 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections suitable for use with pad lock complete all as specified and directed.

S&F in repair 125mm size extruded aluminium alloy handle, fabricated type, anodised, fixed with screws complete all as specified and directed.

S&F in repair 150mm long aluminium anodized barrel tower bolt of extruded section, fixed with screws complete all as specified and directed.

S&F floor door stopper overall length of cover plate 150 mm of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed.

S&F hasp and staple of aluminium anodised, including bolt to hinge plate and fixed with screws 125 mm long complete all as specified and directed.

S&F in repair 300 mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate, complete all as specified and directed.

M&L for running welding at site in repairs exc 6mm but n exc 9mm in length ,thickness of Metal to be welded not exe 06mm complete all as specified and directed.

M&L for welding at site in repairs exc 2.5cm but n exc 5cm in length in length ,thickness of Metal to be welded not exe 06mm complete all as specified and directed.

S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap white, including connection to trap and cistern, flush pipe including white plastic water closet seat cover, closed pattern with flat bottom & cover and aluminium anodised hinging device and making good disturbed surface of floor complete all as specified and directed.

S&F in repair PVC valve less symphonic action, low level flushing cistern of 10 lit capacity including siphon float valve, rubber cone and flush pipe etc complete all as specified and directed.

S&F in repairs complete PVC assembly/ Kit for PVC flushing cistern of any shape or make or capacity complete all as specified and directed.

S&F vitreous china wash basin, white, flat back type of size 550x400mm including brackets including cutting for and pinning in ends of brackets in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed.

S&F in repair vitreous china counter top wash basin, white, oval shape of size 600x400x185mm fixed on granite including cutting for and pinning in ends in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed. Make: Hindware cat part No. 10038 or equivalent make as specified in P.S.

S&F in repair standard PTMT grating doom round 125mm size with waste hole(minimum wt 40 gms) complete all as specified and directed.

S&F PVC connections 15mm bore size 450mm long of pressure rating 6 kg/sq cm with CP brass nuts complete all as specified and directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) squatting pan including connection to trap and to flushing pipe, anti-syphonage pipe etc. complete including making good to floor complete all as specified and directed.

M&L treating ends of posts, back of chowkhats, etc. area tarred exc 0.1 Sqm but n. exc. 0.5 sqm each with tar or coal tar black paint including preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described complete all as specified and directed.

M&L mild steel work as in bands, straps, supports or stays for rain water, ventilating pipes including bolts, if required, hooks (stay) heavy for large gates, hooks and pintle hinges, large hasp and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F in repair brass CP towel ring 20cm dia, fancy type, superior quality, fixed with screws complete all as specified and directed. Make: Jaguar Cat Part No. ACN-1121BN or equivalent make as specified in P.S.

S&F in repair health faucet with 1m long flexible pipe with wall hook complete with all fittings complete all as specified and directed. Make: Jaguar Cat Part No.ALD-565 or equivalent make as specified in P.S.

S&F in repair soap dish brass chromium plated Round/oval shaped fixed to wall with PVC gutty and CP screws complete all as specified and directed. Make : Prestige cat part no. B09MQMRJPN equivalent make as specified in P.S.

S&F in repair stainless steel sink with drainage board, made out of 1.00 mm thick stainless steel sheet conforming to AISI 304 with plug, washers, waste pipe, cast iron cantilever brackets, connecting union over all size 950 mm X 510 mm with bowl size 410 mm x 410mm x 230 mm complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack (utensil rack) of size 600mmx750mmx250mm, made out of 0.63mm thick stainless steel sheet, approved design and fixed to wall with brass screws and PVC gully including all necessary fittings like nuts and bolts etc complete all as specified and directed.

S&F in repair pillar taps 15mm bore (weight should not be less than 0.665kg), fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply only pillar taps 15mm bore (weight should not be less than 0.665kg), fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair stop valves 15mm (weight should not be less than 0.575kg) bore concealed type cast copper alloy, chromium plated, fancy type with long shank and cup screwed down, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs stop valve cast copper alloy (weight should not be less than 0.400kg) screwed down, high pressure with crutch or butterfly handles, screwed down, screwed both ends for iron pipes or for unions, 20 mm dia of pipe complete all as specified and directed.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed

Taking up or down 15mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and directed.

Taking up or down 20mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and directed.

S&F 15mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

S&F 20mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

Refixing old steel tubing and connection in new or old position in wall/ceiling/floor etc bore of pipe 15mm dia complete all as specified and directed.

Refixing old steel tubing and connection in new or old position in wall/ceiling/floor etc bore of pipe 20mm dia complete all as specified and directed.

S&F in repair rotational moulded, multilayer HDPE water storage tank of 500 ltrs capacity white colour three layer (Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank nipple, 20 mm dia PTMT float valve epoxy coated aluminium rod with high density plastic float ball( of minimum weight 210 gms) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F in repair rotational moulded, multilayer HDPE water storage tank of 1000 ltrs capacity white colour three layer cylindrical vertical with closed top, ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank nipple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball of minimum weight 210 gms and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F in repair overhead PVC water tank cover of capacity 500/1000 ltrs including fixing the cover with PVC hinges and locking system to the existing tank complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to trenches, floor complete all as specified and directed.

S&F in repair PVC (SWR) bend any radius suitable for 110mm bore with access door PVC pipe jointed with solvent complete all as specified and directed.

S&F in repairs aluminium (Die cast) body Door closer hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repair aluminium Lock,4 Lever,100mm long fixed to aluminium doors complete all as specified and directed

S&F in repair double action floor spring hydraulically regulated made up of aluminium alloy sheet foundation box with stainless steel cover fixed to Aluminium doors complete all as specified and directed.

S&F in repairs steel window handles left/right, and peg stay including welding to base plate as required pin and handle/brackets complete all as specified and directed.

Supply only galvanised Iron, medium grade Reducer socket,20 x 15 mm bore complete all as specified and directed.

S&F in repair 25mm dia stainless steel, fancy type drapery rod bright polished including end brackets and end knobs fixed with brackets complete all as specified and directed.

S&F in repairs flushing jet for pedestal pattern W.C including flexible pipe and brass Chromium plated nuts, complete all as specified and directed.

S&F in replacement of CP telescopic channel of size exc 45cm but n.exc 50cm long, heavy duty to match with existing size and shape complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc.

M&L for rendering 15mm thick in CM 1:6 on other fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed

M& L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed

Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material upto a distance n.exc 100m where directed complete all as specified and directed

Demolition of mud in roof, any thickness including plastering and leaping ( where full thickness recovered or only a part there of disposal off rubbish upto a distance n.exc 100m, where directed complete all as specified and directed.

M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in roof curbing, padding over roof slab complete all as specified and directed. Note - Average thickness shall not exceed 40mm complete all as specified and directed.

M&L for rendering 10 mm thick on concrete surface when concrete is green on roof surface in cement mortar 1:3 complete all as specified and directed

M&L for preparation of existing roof surfaces and roof treatment with reinforced elastomeric liquid waterproofing membrane of 400-micron thickness in four layer(100 micron each layer) having SRI of 1 30, tested as per ASTM E 1980 (with Solar Reflectance and Thermal remittance tested as per ASTM C 1549 and ASTM C 1371 , respectively). The coating should have water absorption less than 1% as per IS: 101 (P-7/Sec-1) 1989, with the ability to resist heat upto 120 00 as per IS: 101 (P-7/Sec-3) 1990 having volatile organic compounds less than 50 gm/litre as per ASTM D 3960 and should have excellent resistance to transmission of ponded water up to 2.5 bars of pressure for 7days. It should also be resistant to Ammonia solution, Sodium nitrate, Sodium hydroxide, along with water and soap solution as per IS: 101 (P-7/Sec-2)1990. The waterproofing membrane will be laminated with 25-40 micron thick transparent Nano modified composite cross linking polymeric coating with a minimum of 40% solid content as per IS: 101 (P -8/Sec6)1993 and also should pass Impact test as per IS: 101 (P-5/Sec-3) 1988 along with having dust and water repellent & anti-graffiti property passing scratch hardness test of 500g as per IS: 101 (P-5/Sec-2) 1988. It should also pass Cross Cut Adhesion test as per IS: 101 (P-5/Sec-2) 1988. The Polymeric coating should have a self cleaning and easy-to-clean property with excellent weather stability and DPR (Dirt pickup ratio). Surface preparation includes pressure wash cleaning to remove all dust, fungus, etc.The work will be done under the supervision of the Engineer-in-charge by Graco airless machine. The coating thickness and the methodology of application shall strictly be carried out by the authorised vender/ manufacturers with all specifications and as approved by GE. (Make: Dr. fixit, Pidilite, Sika, Star shield)Note :- Roof treatment shall be carried out by the manufacturer in presence of the Engr-in-charge. The manufacturer shall give a guarantee for the performance & durability for 10 years. Tenderer is deemed to quote the rate accordingly.

Siddhi Constructionn

YASH ENTERPRISES

M/S Garg Sons

Channa Brothers and Co.