Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹1.0 LAccepted-Finance HIMACHAL PRADESH HP | L-1 | Accepted-Finance due to rates are on lesser side | |
| 2 | L-2₹1.1 L+₹7,264 (7.19%)Rejected-Finance | L-2 | Rejected-Finance due to rates are on higher side | |
| 3 | L-3₹1.1 L+₹10,924 (10.8%)Rejected-Finance C O R WALL NEAR GOVT SR SEC SCHOOL SANJAULI IN WARD NO 17 BENMORE | L-3 | Rejected-Finance due to rates are on higher side | |
| 4 | L-4₹1.2 L+₹20,889 (20.7%)Rejected-Finance | L-4 | Rejected-Finance due to rates are on higher side |
| Sl No | Description | Qty | Unit | Govind Singh L3 | Mukesh Kumar L1 | Des Raj Basant L2 | Chetan Sharma L4 |
|---|---|---|---|---|---|---|---|
| 1.00 | Supply & Erection submersible pumping set ofreputed make such KSB/Clama/Jyoti/BS confirming to BIS-8034-1976 and latest with up to date amendmants suitable for opretation on under memtioned characteristic complete as per manufacture standared inculding required accessorias coupled directed to submersible motor suiable for apereation 220 volts single phase 50 H.Z.AC suplly miniemun class B insulation the power of motor 10% in case of minimum power required by the pump in complete range of (-)25 % and ( +) 25% and (+)40% ofduty point head .the motor should be conforming to BIS-325 -1979 and latest with up to date amendements the pump should capable of following performances I) Total no of set required 1 Nos,II) Discharge of each (one LPS) III) Total Head ( 75 to 125) IV) Dia of bore 125 mm Dia V) Heights of above MSL 750 MtrsVI) Dia of R/M 32 mm | 1 | Each | 33,000 ₹33,000 | 31,000 ₹31,000 Lowest | 32,000 ₹32,000 | 32,500 ₹32,500 |
| 2.00 | Supply fixing of suitable control panel of M.S. Sheetof following I) Reputed make suitable starte 1 NosII)Ammeter od reputed makes 1 NosIII) Voltmeter of reputed 1 NosIV ) Phase indicated 1 NosV)Single phase preventor 1SetVI) MCB selector switch 1NosVII) Over Load relay 1 Nos VIII) Capacitor 1 Nos | 1 | Each | 9,500 ₹9,500 | 9,000 ₹9,000 Lowest | 9,500 ₹9,500 | 9,000 ₹9,000 Lowest |
| 3.00 | Providing &fixing joint less flat cable or suitable size 2.50 mm 2 upto required length as per site condition within all lead & ligts | 65 | Per Rmt. | 180 ₹11,700 | 170 ₹11,050 Lowest | 190 ₹12,350 | 180 ₹11,700 |
| 4.00 | Providing & Fixing reqired make cost iron class PN-6 non retuen valve of dia eqal to R/main i.e 32 mm dia within allleads & lift . | 1 | Each | 1,500 ₹1,500 | 1,200 ₹1,200 | 1,195 ₹1,195 Lowest | 1,400 ₹1,400 |
| 5.00 | Providing & Fixing M.S clamps or suitable size made of M.S flat i/c nit,bolts rubber sheet washer comlete in all respect. | 1 | Each | 1,200 ₹1,200 | 1,000 ₹1,000 Lowest | 1,100 ₹1,100 | 1,100 ₹1,100 |
| 6.00 | Providing &lowering of HDPE riser pipes 32 mm dia complete with wire rope support with other accessories with in all leads having 6.00 kg /sq.cm.pressure | 65 | Per Rmt. | 290 ₹18,850 | 240 ₹15,600 Lowest | 265 ₹17,225 | 250 ₹16,250 |
| 7.00 | Excavation in foundation, trenches etc. in all kinds of soil such as pick work, jumper work, blasting work in soft / hard rock, chiselling in soft / hard including wedging out of a rock where blasting is prohibited and stacking the excavated earth up to all lifts, stacking the excavated soil up to all lead clear from the edge of excavation and then returniing the stacked soil in 15 centimeters layers when required in to plinths, sides of foundation etc. consolidating each deposited layer by ramming and waterng and then disposing of all surplus excavated earth as per direction and to the entire satisfation of Engineer- in- charge up to leads and lifts. as per the direction of Engineer in charge | 50.7 | Per Cum | 400 ₹20,280 | 380 ₹19,266 Lowest | 400 ₹20,280 | 750 ₹38,025 |
| 8.00Laying, Jointing of GI pipes of following dia in trenches galvanized mild steel tubes including fittings complete (earth work in trenches to be measured and paid for separately) including and all leads and lifts as per the direction of the Engineer-in-charge and satisfaction of Engineer incharge | |||||||
| 8.10 | 25 mm Dia | 250 | Per Rmt | 34 ₹8,500 | 25 ₹6,250 | 30 ₹7,500 | 20 ₹5,000 Lowest |
| 8.20 | 15 mm dia | 140 | Per Rmt | 22 ₹3,080 | 18 ₹2,520 Lowest | 20 ₹2,800 | 20 ₹2,800 |
Tender Value
₹1.3 L
EMD Value
₹2,642
Closing Date
22 Sept 2025, 5:00 pmClosed
EE JSV Division Tissa
EE JSV Division Tissa
Energisation of hand pumps 1 No under 2HP Submersible single phase at village Banodi
2025_HPIPH_114600_1
EE-JSD-TSA-EA-I-2025- 2107-56 dated- 11-09-2025
Open Tender
Civil Works
Item Rate
90 days
EE JSV Division Tissa
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
EE JSV DIVISION TISSA
₹2,642
31 Oct 2025
12 Sept 2025
23 Sept 2025
12 Sept 2025
22 Sept 2025
12 Sept 2025
Amount
Supply & Erection submersible pumping set ofreputed make such KSB/Clama/Jyoti/BS confirming to BIS-8034-1976 and latest with up to date amendmants suitable for opretation on under memtioned characteristic complete as per manufacture standared inculding required accessorias coupled directed to submersible motor suiable for apereation 220 volts single phase 50 H.Z.AC suplly miniemun class B insulation the power of motor 10% in case of minimum power required by the pump in complete range of (-)25 % and ( +) 25% and (+)40% ofduty point head .the motor should be conforming to BIS-325 -1979 and latest with up to date amendements the pump should capable of following performances I) Total no of set required 1 Nos,II) Discharge of each (one LPS) III) Total Head ( 75 to 125) IV) Dia of bore 125 mm Dia V) Heights of above MSL 750 MtrsVI) Dia of R/M 32 mm
Providing &fixing joint less flat cable or suitable size 2.50 mm 2 upto required length as per site condition within all lead & ligts
Providing & Fixing reqired make cost iron class PN-6 non retuen valve of dia eqal to R/main i.e 32 mm dia within allleads & lift .
Providing & Fixing M.S clamps or suitable size made of M.S flat i/c nit,bolts rubber sheet washer comlete in all respect.
Providing &lowering of HDPE riser pipes 32 mm dia complete with wire rope support with other accessories with in all leads having 6.00 kg /sq.cm.pressure
Excavation in foundation, trenches etc. in all kinds of soil such as pick work, jumper work, blasting work in soft / hard rock, chiselling in soft / hard including wedging out of a rock where blasting is prohibited and stacking the excavated earth up to all lifts, stacking the excavated soil up to all lead clear from the edge of excavation and then returniing the stacked soil in 15 centimeters layers when required in to plinths, sides of foundation etc. consolidating each deposited layer by ramming and waterng and then disposing of all surplus excavated earth as per direction and to the entire satisfation of Engineer- in- charge up to leads and lifts. as per the direction of Engineer in charge
Laying, Jointing of GI pipes of following dia in trenches galvanized mild steel tubes including fittings complete (earth work in trenches to be measured and paid for separately) including and all leads and lifts as per the direction of the Engineer-in-charge and satisfaction of Engineer incharge
25 mm Dia
15 mm dia
P/F MS sheet box for electric meater
Des Raj Basant (BID ID -559102)
Govind Singh (BID ID -559131)
Chetan Sharma (BID ID -559174)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .