SPECIAL REPAIRS TO BLDG NO P-180 AT MES COMPLEX BRICHGUNJ MIL STN SRI VIJAYA PURAM

Taking down chowkats or frames with shutters area n.exc 1.5 Sqm each(without taking off shutters from the frame) complete all as specified and as directed

Taking down chowkats or frames with shutters area exc 1.5 Sqm but n.exc. 4.0 Sqm each(without taking off shutters from the frame) complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows and other Frames/chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 650 kg/Cum, screw withdrawal strength of 2200 N (face) and 1100 N (Edge), minium compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of bearing termite/ borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in- Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately.) Note:- For WPC soild door/Windows frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.)

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows and other Frames/chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 650 kg/Cum, screw withdrawal strength of 2200 N (face) and 1100 N (Edge), minium compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of bearing termite/ borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in- Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately.) Note:- For WPC soild door/Windows frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.)

S&F Factory made single extruded WPC (Wood Polymer Composite) Solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) and 900 N (Edge), minimum compressive strength 50 N/mm2, modulud of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded door Shutter, 28 to 30 mm thick (Stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face with Particle board Core, in frame at site as per specification & drawing complete all as specified and as directed.

S&F Factory made Wire gauzed PVC solid wood grain printed door shutter 30mm thick (style) i.e panel will be of wire gauze in lieu of single prelam PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S Solid tube and this tube shall be welded to M.S tubes. The wire gauze shall be stretched to tighten firmly consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles with suitable PVC sheet beading, and joined together with solvent cement, in the frame at site as per specification & drawing in SSR complete all as specified and as directed.

S&F Powder coated aluminium (minimum thickness of powder coating is 50 microns) Door/ Window/ Ventilator/ partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, handles, locking arrangement etc, including builders hardware like aluminium aldrop, tower bolts, handles of required size and type complete with standard aluminium sections, all as specified and as directed by Engineer-in-Charge. (Aluminium sections shall be of make Jindal/ Hindalco/ Indalco). (Note:- Weight of various aluminium sections shall only be considered for measurement for payment. Weights of builders hardware like aluminium alddrop, tower bolts, handles of required size and type shall not be considered. However cost of rubber packing given in the item shall be deemed to be included in the quoted rate. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable wil be measured and paid separately as supplied only.)

S&F Powder coated aluminium (minimum coating of powder coating 50 micron) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

S&F Powder coated aluminium (minimum coating of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.