Main Road Lighting work from Gupta Chauraha (HighwayCity Scheme) to Chakeri mod and from Alaknanda mod to Alaknanda Railway.

PART - A

Supply & Fixing of Street Light Fitting with mandatory driver set having die cast aluminium body and lenses 110 to 130 watt. Confirming to IP 66 protection having company LOGO engraved complete in all respect including labour as per direction of E/I. SI. No. 1424/2018 Cat-AAA. 15400-16500 system lumens High Power LED with Lenses, >1101m/W, PF>0.95 THD<10% at full load, CRI>70, Potted driver set (Not Circuitory) Phase to Phase Protection at 440V & > 300V auto cut and re-start feature, with 5 years warrantee. Make Havells, Philips, Bajaj.

S/B of 600mmx600mmx6mm G.I plate vertically for earthing with it top at least 3 mtr below G.L. complete with 20mm dia G.I. pipe and funnel for watering and 1 earthing lead of 1 No 8 to 10 SWG G.I. wire in 15mm dia G.I. pipe, plate up to switch board 30Cm C.I. frame with hinged cover masonry housing Alternate layers of charchole/coke and solt etc. as per direction of E/I. Complete in all respects. S.I.No-702/18.

S/F of 63 Amp 415 V metal clad TPN rewireable type switch fuse unit on angle iron bracket/Pole complete in all respects as per direction of E/I. SI. No. 316/18. CAT-B.

S/F of 40A TPN of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contractors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc, in case of TPN, complete in all respect as per direction of Engineer-in-charge. SI. No. 807/18 e(ii).

Supply & Fixing of Suspension type clamp made of 'Al' alloy and shall be capable of holding AL alloy messenger wire of compacted dia. The eye hook shall be made of forged or mild steel the clamp shall be provided with black weather resistant plastic coating of at least 1mm thickness to prevent insulation of phase conductor from chafing due to rubbing against the clamp it shall provided sufficient flexibility to allow the movement of clamp at both, straight and angle location its hard ware shall have good finished and all ferrous fitting eye hook bolts nut and washer shall be galvanized with zinc and it also includes all the cost of material T&P etc. required for proper completion of work as per direction of E/I.

Supply & Fixing of Dead end type clamp made of 'Al' alloy and U-bar shall be capable of holding AL alloy messenger wire of compacted dia. The eye hook shall be made of forged or mild steel the clamp shall be provided with black weather resistant plastic coating of at least 1mm thickness to prevent insulation of phase conductor from chafing due to rubbing against the clamp it shall provided sufficient flexibility to allow the movement of clamp at both, straight and angle location its hard ware shall have good finished and all ferrous fitting eye hook bolts nut and washer shall be galvanized with zinc and it also includes all the cost of material T&P etc. required for proper completion of work as per direction of E/I.

S/F of distribution board box for 3 phase ten way connection made of fiber sheet 450x300x200mm size complete with bus bar 25x5mm, neutral bus bar 20x5mm, along with clamps holes etc including the cost of material I T&P etc for proper completion of work. (PSR)

S/L of following size "Al" conductor P.V.C. insulated armoured served sheathed cable 1100V grade at a depth of 750mm. Below ground level over a cushion of 75mm. Thick sand alround and protected with burnt bricks on side an top on surface the cable run shall be fixed on MS clamp of suitable size, approved make as direction of E/I. complete in all respects. 501/2018.