REP TO BOUNDRY WALL, HARDSTANDING DRAIN AND OTHER B/R REPAIR UNDER ZONE-1 AREA AT JAIPUR MIL

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 for raising of height of drain, manhole / wall complete all as specified and directed.

All as per item No 6 herein before but except brick

M & L for stone Walling of squared rubble uncoursed , well bonded, bedded and solidly hearted built in CM 1:4 complete all as specified and directed.

M & L for stone Walling of squared rubble uncoursed , well bonded, bedded and solidly hearted built in CM 1:5 except stone

Taking down cement plaster or cement lime plaster on brick / stone surfaces of wall or ceiling including raking outs joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M & L rendering 15mm thick on Brick masonary surfaces or surface other than fair faces of brick work on wall in CM 1:4 finished even and smooth without using extra cement.

M & L for preparation of new plastered wall surfaces and applying two coats of cement base paint on wall/RCC Jallies complete all as specified and directed.

M & L for preparation of old plastered wall surfaces and applying two coats of cement base paint on wall/RCC Jallies complete all as specified and directed.

M&L for two coat of weather proof exterior emulsion paint (Weather coat smooth) over a coat of priming (Seal-o-Prime) on new plastered surface complete all as specified and directed.

M&L for prepration of old plastered surface and applying two coat of weather proof exterior emulsion paint (Weather coat smooth) complete all as specified and directed.

M&L preparation of old steel surface and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old concrete surfaces of any description over 10cm girth or width, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

All as s per item No 10 above but two coats

M & L 75 mm thick cement concrete type C-2, 1:3:6 (40mm graded aggregate) as plinth protection finishing even and smooth without using extra cement complete all as specified and directed.

Demolition of unreinforced cement concrete in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and directed.

M & L 100 mm thick plain Cement Concrete 1:4:8 type D-2 (40mm graded aggregate) in sub base floor complete all as specified and directed.

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in cement mortar complete all as specified and directed.

M & L for 25 mm thick sand cushion for laying of Paver block complete all as specified and directed

M & L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, with grey cement laid over sand cushion layer complete all as specified and directed(sand cushning to be paid seprately)

All as per item No 17 above but except tiles

M & L precast PCC blocks or slabs (1:2:4) mix type B-1 using 20 mm graded aggregated with plain or interlocking joints, Kerb stone on road side etc as directed complete in walls setting in CM (1:6).

M & L precast PCC blocks or slabs 150 mm thick (1:2:4) mix type B-1 using 20 mm graded aggregated with plain or interlocking joints, Kerb stone on road side etc as directed complete in walls setting in CM (1:6), except blocks

M&L for preparation of new concrete surfaces of any description over 10cm girth or width, not otherwise described and applying two coat of synthetic enamel paint over a coat of primer complete all as specified

Demolition of reinforced cement concrete in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L precast reinforced cement concrete slab type B1, 1:2:4 ( 20mm graded aggregate ) as in landing, drain cover slab ( for manholes etc ) , chajjas , drain cover and shelves and similar articles with plain faces . (Reinforcement shall be measured & paid separatel.)

M&L plain cement concrete type B1 1:2:4 ( 20mm graded aggregate) as in lintels, cills steps, seismic and other similar bands , copings, kneelers, apex stone bed plates , kerb ,water troughs and like including weathering, slightly rounded or chamfered angles and throating as directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

_dittio_ all as per item No 27 above but 6mm to 8mm dia

S&F steel frame of angle section with all requires welding and joints for the in situ casting in RCC drain covers of size as per direction at site complete all as specified and directed.

Demolition of precast RCC slab / jallies including raming of any description any in any position set in cement mortar complete all as specified and directed.

M&L providing precast cement concrete (1:2:4) louvers and jallies 25mm thick (measured solid) including all mouldings but excluding frame & set in CM 1:4

Dismantling of Mangalore pattern roofing tiles with ceiling tiles or slate roofing complete all as specified and directed.

M & L Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and directed.

Dismantling plain or corrugated steel / FRP sheeting any gauge, thickness including nainital or similar pattern roof /wall covering complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description nototherwise provided for

S & F steel work in tubular/ square/ rectangular trusses incl special shaped washer etc, complete using ERW orinduction butt welded tubes conforiming toIS 1161-1979 graded St-240

M&L pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F in repairs 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L- type or J- type or cranked hook bolts

Dismantling posts or struts (wood, steel or R.C.C.) any section embedded in concrete, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling galvanised chain link fencing of any description fixed to any type of fencing posts complete all as specified and directed.

S&F mild steel work such as angle iron in posts & struts in fencing including cutting tops to shape hand rail straight portion , drilled and contersunk for balusters , nosing to steps, struts in fencing including cutting tops to shape as directed , drilling holes, notching for wire etc flat iron fillets ( for securing chain link fencing ) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165

M & L plain Cement Concrete 1:2:4 type D-2 (40mm graded aggregate) in foundation filling mass concreting complete all as specified and directed.

Fixing only mild steel galvanized chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire. Note :- Supply only chain link fencing shall be measured and paid for separately.

Supply only mild steel galvanized chain link fencing 4mm dia of mesh wire, mesh size 100x100mm including line wires complete all as specified and directed.

S&F as in repair galvanized 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanized mild steel wire, staples or steel pins etc as directed.

M & L for Restraining resecuring including making good staples etc complete all as specified and directed.

S&F in repair mild steel round bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for chain link fening ( in new or old )

M & L for prearation of new steel surface and applying two coat of synthetic enamel paint over a coat of red oxide primer, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed.

M & L for prearation of old steel surface and applying two coat of synthetic enamel paint , n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed.

M&L for prearation of new steel surface and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified

Schedule of Credit

UNIVERSAL INFRAPROJECT PVT LTD

M/S MAYANK ASSOCIATE

S.R.Enterprises

M/S JALANDRA CONSTRUCTIONS

Baradwal Construction Company

Smita Constructions

JAGDAMBA CONSTRUCTION COMPANY