ANNUAL MAINTENANCE CONTRACT FOR YEAR 2023-24 OF EESLs SUB VENDOR EON MAKE LED LIGHTS INSTALLED AT VIDYADHAR NAGAR, MURLIPURA AND MALVIYA NAGAR ZONE ARC 2023-24

Amount

Vidhyadhar Nagar Zone Murlipura Zone & MalviyaNagar Zone

EON Make LED Lights (190W, 110W, 70W, 18W etc.) VD zone: 5500 Points Murlipura: 5500 Points MalviyaNagar : 2000 Points

Technical Specifications of PCB/Drivers

110Watt Potted Driver Vin: 220-240VAC Fin: 50Hz I in: 0.54A max Pin ;110w max THD;<10% PF in ; >0.95 Vout; 39-44VDC Iout: 2.47ADC Pout(max); 106W ta: 0-50C tc; 85C PCB Luminaire efficacy >=120 lm/ wt with High Power LEDs with secondary lens on each LED Make : Philips, Bajaj, Surya, Wipro, CG, Havells, HPL, Lighting Science, Schreider, Keselec, Instapower, orient

95Watt Potted Driver Vin: 220-240VAC Fin: 50Hz I in: 0.45A max Pin ;95w max THD;<10% PF in ; >0.95 Vout; 44-50 VDC Iout: 1.82A DC Pout(max); 90W ta: 0-50C tc; 85C PCB Luminaire efficacy >=120 lm/ wt with High Power LEDs with secondary lens on each LED Make : Philips, Bajaj, Surya, Wipro, CG, Havells, HPL, Lighting Science, Schreider, Keselec, Instapower, orient

70Watt Potted Driver Vin: 220-240VAC Fin: 50Hz I in: 350mA Luminous Flux: 8000Lm PF in ; >0.95 THD;<10% CCT; 5700K CRI;7Q ta: -10-50C PCB Luminaire efficacy >=120 lm/ wt with High Power LEDs with secondary lens on each LED Make : Philips, Bajaj, Surya, Wipro, CG, Havells, HPL, Lighting Science, Schreider, Keselec, Instapower, orient

18Watt Potted Driver Vin: 220-240VAC Fin: 50Hz I in: 0.09A max Pin ;18w max THD;<10% PF in ; >0.95 Vout; 22-24VDC Iout: 660mADC Pout(max); 15.5W ta: 0-50C PCB Luminaire efficacy >=120 lm/ wt with High Power LEDs with secondary lens on each LED Make : Philips, Bajaj, Surya, Wipro, CG, Havells, HPL, Lighting Science, Schreider, Keselec, Instapower, orient

Note : 1. All Taxes & on site maintenance Labour rates are included in Estimated rates. 2. Contractor should be resolved the complaints as per the complaints received from call center & direction of concerned site engineer. 3. Contractor Should be deposite the sample of PCB & driver( which is using for maintanence) of each type with dully signed by contractor, JEN, AEN & XEN and will be stored regularly monthaly basis in zone store. 4. Contractor has to be maintain the origionality of all fixtures with proper plates & drivers. 5. Contractor should be resolved the complaints before 48 hrs otherwise penulty will be duducted 50/- per point per day.

GOPINATH SANITARY AND ELECTRICALS

M/S DILIP SINGH ELECTRICAL WORKS

Jyoti electronics