Construction of Road from Barkhara-Barmura road to Pitambar-Murara road via Kalita suba under SOPD(G) for the year 2025-26

Heavy dressing of the existing road including dressing high spots and filling low spots, cambaring, watering, rolling with 8 to 10 tonne roller to obtain a specified compaction etc. to obtain a uniform formation surface with cross fall from the road centre line to the outer shoulder edge with allowance made for required quantity of shoulder materials to remain in place to contain the new gravel layer. Works to be carried out in accordance with Technical Specification and as directed by the Engineer.

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting p g to meet requirement of Tables 300.1 and 300.2 (including land compensation of earth) (a) from Private land

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 (a) from Private land

Single bamboo spur and palisading of whole 2nd class bamboo (jati or Bethua) 65 mm to 75 mm dia and closely packed & driven, including fitting, fixing with half bamboo kamis horrizontally in three rows with cane or tying wire complete and struts 1500 mm apart longitudinally and providing brush wood as per drawing and technical specifications Clause 1302.5 I. Driven at least 900 mm below ground and 900 mm above ground on average

Supplying and laying sand filled gunny/plastic bag with coir string and containing sand approximately 0.02 Cum per bag in position as directed by the development.

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor rader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller capacity to achieve the desired density, complete as per Technical Specification Clause 402