Loading…
Loading…
Tender Value
₹59.4 L
EMD Value
₹1.2 L
Closing Date
8 Jun 2026, 11:00 amDue tomorrow
Executive Engineer
SCO No 35 2nd Floor Sector 17E Chandigarh
Special Repair and Upgradation of Olympian Balbir Singh Senior Hockey stadium at Mohali Punjab Electrical works only Internal and External Electrical Services
2026_CEPW_169054_1
Tender Notice No11
Open Tender
Electrical Works
Executive Engineer Electrical Division
Please refer Tender documents.
2 documents required · 2 mandatory
₹5,000
Yes
₹1.2 L
Yes
29 May 2026
29 May 2026
8 Jun 2026
29 May 2026
8 Jun 2026
29 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1Providing Campus Lighting:- | ||||||
| 1.01 | Supply and Erection of 70 Watt LED Street Light fitting (including LED driver) suitable for energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and Toughened glass having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK07, THD< 10%, CRI minimum 70, High power LED with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, efficacy of LED fixture minimum 120 lumens per watt, complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to CM Punjab vide letter No. AT-2021/GL 1410-1422 Dated 06/05/2021. Besides this the Lighting Fixture manufacturer should have inhouse auredited LAB. | 35 | Each | 3,800 | ₹1,33,000 | BI01010001010000000000000515BI0100001119 |
| 2 | Supply and Erection of Decorative Pole 6 Meter long with Decorative bracket. Architectural Lighting Pole is design to create a distinctive atmosphere in town & cities by using the most advanced technology to develop innovative lighting solutions. Poles can stylishly convey the identity of any landscape. Our poles can be designed to suit single or multi arms brackets in order to install one or more light sources. Product Description:- • Pole made of Galvanized and steel types. • Pole design parameters vary depending on the type of bracket and loading factor. • Conical pole are welded using saw welding technique by certified welders by using automatic machine with precision welding. • Other Welding using special v groove technique by certified welders using high end MIG welding processes. • Built-in control box with service door and safety rope. • Service door is contoured to the shape of the pole with rubber gasket. • The control gear tray is prewired with MCB, terminal connectors for loop-in / loop-out arrangement. • The foundation bolt holes in the base plate are designed to be elongated for fine adjustments / alignment of the pole during installation. • Base plate made of steel grade E250 & foundation bolt of grade 4.6 including RCC Foundation of size 2x2x4 mm depth. complete in all respects as approved and desired by the Engineer in-charge at site. | 39 | Each | 25,240 | ₹9,84,360 | BI01010001010000000000000515BI0100001120 |
| 3 | Supply and Erection of 50/60w LED Decorative drop down light made of cast Aluminium span Aliminium clear Acrylic(A9) housing fitted with clear/Polycarbonate diffuser Aluminium heat sink. Input power 60w with THD less tha 10%with driver efficiency greater than 55%, operating voltage range 100-270 V with output open circuit protection, short circuit protection and over voltage protection with internal surge protection 5KV and output surge protection 10 kv. Luminous flux 3000/4000/5700 k. IP Grade 66, Minimum CRI 70. LED Life 50000 Hrs min. Complete in all respects as approved and desired by Engineer In charge at site. | 39 | Each | 10,140 | ₹3,95,460 | BI01010001010000000000000515BI0100001121 |
| 4DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES: Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:- | ||||||
| 4.01 | Double Walled Corrugated HDPE Pipe 50/ 38mm (Outer/ Inner dia.) | 2,600 | P Mtr | 133.79 | ₹3,47,854 | BI01010001010000000000000515BI0100001123 |
| 5XLPE INSULATED UN-ARMOURED CABLES (LOOSE):-Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- | ||||||
| 5.01 | Overall size 16sq.mm (4Core) Un-armoured (Loose) | 3,000 | P Mtr | 200.17 | ₹6,00,510 | BI01010001010000000000000515BI0100001125 |
| 6G.I. EARTHING: Earthing earth rod 20 mm dia for providing earth connections upto line earth with G.I. Wire 8 S.W.G. (4mm dia.). The rod shall be tapered at one end and flatted on other end. The hole size 10mm dia shall be drilled on the flatened side for facilitating connection with G.I. wire and thimble etc. The rod shall be erected in ground upto complete length vertically:- | ||||||
| 6.01 | GI Earth rod 20 mm dia. 3 mtr. Long | 75 | P Mtr | 1,274.74 | ₹95,605.5 | BI01010001010000000000000515BI0100001127 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.54 MB
SBD_compressed.pdf
Tender Documents • 24.95 MB
BOQ_344258.xls
BOQ • 0.42 MB
Download all tender documents and submit your bid