Loading…
Loading…
Tender Value
₹21.8 L
EMD Value
₹43,670
Closing Date
22 Sept 2026, 3:00 pm
CE OP Metro Zone
Mint Compound, Hyderabad
Bifurcation of 11KV Kanajiguda feeder emanating from 33/11KV Tirumalgiri SS by laying of 1.6 KM new 11KV feeder which involves laying of 1.6 KM 3X300 Sq.mm. 11KV XLPE UG cable (Single Run) along with erection of 1No 11 KV feeder VCB at 33/11KV Gunrock SS in Old Bowenpally section of Bowenpally Sub-division of Bowenpally division in Secunderabad Circle under T and D Improvements to original works under General Category
731510
Chief Engineer/Operation/Metro Zone/TGSPDCL:eMZ-20/26-27
OPEN
Electrical Works
HYDERABAD, TELANGANA
1 document required · 1 mandatory
₹773
₹43,670
8 Sept 2026
8 Sept 2026
8 Sept 2026
LOADING & UNLOADING11 KV AB Switch Conventional type 200/400 A
UNLOADING of 11 KV AB SWCH Con 200/400 A
ERECTION OF EQUIPMENT Substations Erection of 11 KVAB Switch including alignment and earthing
AB Switch Coil Earthing GI No. 8 Wire
Painting of operating rods of 33kV, 11kV AB switches with post office red colour (including cost of paint)
S-CI Pipe earthing 100mm dia 2.75m long
ERECTION OF LINES : Providing of earthing with excavation of earth pit (0.6 x0.6x2.4 Mts.) duly filling with bentonite, sand & brick masonry on four sides of the earth pit and plastering to brick masonry work, running of earth wire etc., complete, exclud
S-Earthing GI flat 25x3 mm incl material
ERECTION OF LINES : Providing of RCC collar to existing earth pit.Providing of RCC Collar guarding to the existing earth pits with damaged masonry including dismantling and removing of existing masonry and fixing the RCC collar of 0.60 M dia X 0.50 M he
ERECTION OF LINES : UG Cables Jointing :Outdoor / Indoor end termination 11 KV XLPE UG Cable 3 x 300 Sqmm
Lay-SR 11KV 3x300sqmm UG Cb CC/BT Compsr
Raise-SR 11KV 3x300sqmm UG Cb on support
Supply of 6" B Class GI Pipe with 5mm thickness and weight 20Kg per meter
Supply of RCC cable Joint markers of size 700 X 240 X 75 mm duly engraving with 5 mm thick letters , CPDCL 33000/11000 Cable/Cable joint fixing the 300mm below ground level and 400mm above ground level confirming to IS 5820 2001
LOADING & UNLOADING R.S. Joists 175 x 85 mm
UNLOADING of R.S. Joists 175 x 85 mm
TRANSPORT Transport of steel including line materials such as cross arms, clamps, hardware, cable (loose) and other line materials.Above 10 KM and upto 20 KM
Exca Hard pit w/o blast 0.76X0.76X1.83M
Fabrication of 175x85/150x75mm RS joist pieces upto 12.5 meters length by welding joint together by means of 50x6mm flat and MS channel on either side including the cost of consumable.
Painting of RS Joist, Rail pole including cross arms and clamps with one coat of red oxid and two coats of Al. paint including cost of paint and consumables
Erection of 9/10/11Meter Box pole
Mass concreting of supports erected with CC (1:4:8) using 40 mm, HB G metal including the cost of metal, sand and curing etc. Including the cost of cement
Coping & Muffing-Iron Pole
R.S. joist box poles -Excavation of pit of size 21/2' x 21/2'x5' transportation, loading / unloading erection of pole fixing of cross arms complete painting of one coat of red oxide and two coats of aluminium and coil earthing with GI no. 8 wire and including required bolts and nuts of required size.
Painting of all suppports to a height of 0.3m coping with bituminous paint (black colour) and painting of coping with two coats of white cement (including cost of paint).
LOADING & UNLOADING M.S.Channels, Angles, Flats & Rods etc.,
UNLOADING of MS Channel,Angles,Flats&Rod
TRANSPORT Transport of steel including line materials such as cross arms, clamps, hardware, cable (loose) and other line materials.Above 10 KM and upto 20 KM
Fabrication of Main and Auxiliary structures with welding using raw steel such as RS joist, M.S.Angles, Plates, Channels, including the supply and fabrication of 6mm base plate to the RS-Joist poles excluding cost of Mild Steel and transport charges to substation site.
FABRICATION Fabrication of materials U Clamp 50x6 mm MS Flat
LOADING & UNLOADING 1 KV VCBs along with Panel boards
UNLOADING of 11 KV VCBs&Panel boards
Transport of Cond Drum,VCBs upto 10Km
Construction of Plinth for mounting 11KV VCB of size 1.8mx1.8mx 0.75m(0.3m above GL <(>&<)> 0.45m below GL) with 1:3:6 CC , 40mm HBG metal including plastering and cost of cement
Erection of 11kv VCB
Testing & Commissioning of Equipment
Load-PVC Control Cable 10C
UnLoad-PVC Control Cable 10C
Lay-4C/10C 2.5Sqmm Control Cable
L-Cable Termination to Switchgear
Provide Addl. Feeder on DC Annunciation
Laying of earth mat including excavation of trenches of depth 600mm, welding, connecting to equipment and connecting lightning shield to earth mat and earthing of fence posts, drilling and connecting earth rods including connecting cast iron pipes with the following sizes of MS Flats /GI Flats. including fabrication.75x 8mm MS Flat / GI Flat.
Fabrication and connecting to risers from earth mat to structures, equipment, marshalling boxes, electrical panels, PLCC panels, fencing posts etc.,.M.S./ G.S. Flat 50x6mm / 50 x 8 mm ( Above ground)
Supply <(>&<)> Spreading of 20mm machine crushed metal(HBG) including cost and conveyance of all materials, labour charges etc. complete for finished item of work and as directed by the engineer-in-charge
S-CI Pipe earthing 100mm dia 2.75m long
ERECTION OF LINES : Providing of earthing with excavation of earth pit (0.6 x0.6x2.4 Mts.) duly filling with bentonite, sand & brick masonry on four sides of the earth pit and plastering to brick masonry work, running of earth wire etc., complete, exclud
UNLOADING of 11 KV, 10 KA LAs Line type
LOADING & UNLOADING11 KV, 10 KA LAs Line type -for 100Nos
ERECTION OF EQUIPMENT Substations Erection of 11 KV LAS line type including earthing
S-Al Pad Clamp 75x75x15mm 1 Panther 600A
Connection of equipment to bus and or another equipment with single zebra/Panther conductor including measuring, cutting,clamping and hoisting of suspension insulator assembly to support the conductor wherever necessary.
Previously 28.07.2020 - Excav. of pit in soils except hard rock
S-MS Bolts & Nuts,Washers etc.,
Labour charges for Fixing of all types of clamps
S&F-33/11KV SS Feeder Indicator Board
LOADING & UNLOADING11 KV AB Switch Conventional type 200/400 A
UNLOADING of 11 KV AB SWCH Con 200/400 A
ERECTION OF EQUIPMENT Substations Erection of 11 KVAB Switch including alignment and earthing
AB Switch Coil Earthing GI No. 8 Wire
Painting of operating rods of 33kV, 11kV AB switches with post office red colour (including cost of paint)
S-CI Pipe earthing 100mm dia 2.75m long
ERECTION OF LINES : Providing of earthing with excavation of earth pit (0.6 x0.6x2.4 Mts.) duly filling with bentonite, sand & brick masonry on four sides of the earth pit and plastering to brick masonry work, running of earth wire etc., complete, exclud
S-Earthing GI flat 25x3 mm incl material
ERECTION OF LINES : Providing of RCC collar to existing earth pit.Providing of RCC Collar guarding to the existing earth pits with damaged masonry including dismantling and removing of existing masonry and fixing the RCC collar of 0.60 M dia X 0.50 M he
ERECTION OF LINES : Providing of RCC collar to existing earth pit.Providing of RCC Collar guarding to the existing earth pits with damaged masonry including dismantling and removing of existing masonry and fixing the RCC collar of 0.60 M dia X 0.50 M he
Load-11/33KV XLPE UG cable all size
Unload-11/33KV XLPE UG cable all size
Load-11/33KV XLPE UG Cable for all sizes
Unload-11/33KV XLPE UG Cable all sizes
Transport of Cond Drum,VCBs >10 & <20Km
ERECTION OF LINES : UG Cables Jointing :Outdoor / Indoor end termination 11 KV XLPE UG Cable 3 x 300 Sqmm
ERECTION OF LINES : UG Cables Jointing :Straight through joints11 KV XLPE UG Cable 3 x 185 Sqmm
Supply of RCC cable Joint markers of size 700 X 240 X 75 mm duly engraving with 5 mm thick letters , CPDCL 33000/11000 Cable/Cable joint fixing the 300mm below ground level and 400mm above ground level confirming to IS 5820 2001
Sub Transportation of 9.1 Mts PSCC Poles to location from road side.
Exca Hard pit w/o blast 0.76X0.76X1.83M
ERECTION OF LINES : Erection of pole in position, aligning and setting to work, fixing of cross arms and top clamps, earthing of supports, back filling with earth and stones properly ramming including transport of materials from road side to location ex
Mass concreting of supports erected with CC (1:4:8) using 40 mm, HB G metal including the cost of metal, sand and curing etc. Including the cost of cement
LOADING & UNLOADING11 KV AB Switch Conventional type 200/400 A
LOADING & UNLOADING M.S.Channels, Angles, Flats & Rods etc.,
UNLOADING of MS Channel,Angles,Flats&Rod
FABRICATION Fabrication of materials Back clamps with 50 x 6 mm MS Flat
Crane Charges over and above first hour
Cut-Tree Branch(LT/11/33)&Trnsprt Debris
S-MS Bolts & Nuts,Washers etc.,
Consultan Chrgs for Pursuing Rd Cutting
UNLOADING of 11 KV AB SWCH Con 200/400 A
ERECTION OF EQUIPMENT Substations Erection of 11 KVAB Switch including alignment and earthing
AB Switch Coil Earthing GI No. 8 Wire
Painting of operating rods of 33kV, 11kV AB switches with post office red colour (including cost of paint)
Painting of operating rods of 33kV, 11kV AB switches with post office red colour (including cost of paint)
ERECTION OF LINES : Providing of earthing with excavation of earth pit (0.6 x0.6x2.4 Mts.) duly filling with bentonite, sand & brick masonry on four sides of the earth pit and plastering to brick masonry work, running of earth wire etc., complete, exclud
S-Earthing GI flat 25x3 mm incl material
ERECTION OF LINES : Providing of RCC collar to existing earth pit.Providing of RCC Collar guarding to the existing earth pits with damaged masonry including dismantling and removing of existing masonry and fixing the RCC collar of 0.60 M dia X 0.50 M he
Lay-SR 11KV 3x300sqmm UG Cb CC/BT Compsr
Raise-SR 11KV 3x300sqmm UG Cb on support
CIVIL WORKS :Excavation of pits in all soils except hard rock requiring blasting. 0.75 M x 0.9 M x 1.95 M
Erection of 9/10/11Meter Box pole
Painting of RS Joist, Rail pole including cross arms and clamps with one coat of red oxid and two coats of Al. paint including cost of paint and consumables
LOADING & UNLOADING R.S. Joists 175 x 85 mm
UNLOADING of R.S. Joists 175 x 85 mm
Mass concreting of supports erected with CC (1:4:8) using 40 mm, HB G metal including the cost of metal, sand and curing etc. Including the cost of cement
Fabrication of 175x85/150x75mm RS joist pieces upto 12.5 meters length by welding joint together by means of 50x6mm flat and MS channel on either side including the cost of consumable.
TRANSPORT Transport of steel including line materials such as cross arms, clamps, hardware, cable (loose) and other line materials.Above 20 KM and upto 30 KM
Fabrication of Main and Auxiliary structures with welding using raw steel such as RS joist, M.S.Angles, Plates, Channels, including the supply and fabrication of 6mm base plate to the RS-Joist poles excluding cost of Mild Steel and transport charges to substation site.
Material cost for First coat of 1st Grade Aluminium Paint, brushes etc.
Labour charges for painting including scratching and cleaning of Sub-station structures of 1st coat of Aluminium
(*)Material cost for Second coat of 1st Grade Aluminium Paint, brushes, etc
(*) Labour charges for painting including scratching and cleaning of Sub-station structures of 2nd coat of Aluminium .
Painting of all suppports to a height of 0.3m coping with bituminous paint (black colour) and painting of coping with two coats of white cement (including cost of paint).
Erection of 33kv CT s
Erection of 33kv single phase PT s
Erect-33KV AB Switch in SS
LOADING & UNLOADING 33/11 KV CTs/ PTs
UNLOADING of 33/11 KV CTs/ PTs
LOADING & UNLOADING33 KV AB Switch Conventional type 400/800 A
UNLOADING of 33 KV AB SWCH Con 400/800 A
Erection of HT Metering Box Including Cost of Meter Box
Erect-HT Trivector Meter
Construction of Plinth for mounting HT Trivector meter of size 0.6mx0.3mx 0.9m (0.6m above GL with Brick Masonary <(>&<)> 0.3m below GL with PCC 1:2:4 ) , with 1:2:4 CC bed 3" on top <(>&<)> with 1:4:8 CC bed 4" on bottom including cost of cement
ERECTION OF EQUIPMENT Substations Erection of 33 KV LAS station type including earthing
Cement concrete 1:3:6 ration with 40 MML HBG metal including the cost of all materials and labour complete 1.8 x 1.8 x 0.75 Cum. forVCB plinth
Laying of UG Cable Erection of VCBs33 KV
S-CI Pipe earthing 100mm dia 2.75m long
S-Earthing GI flat 25x3 mm incl material
ERECTION OF LINES : Providing of RCC collar to existing earth pit.Providing of RCC Collar guarding to the existing earth pits with damaged masonry including dismantling and removing of existing masonry and fixing the RCC collar of 0.60 M dia X 0.50 M he
ERECTION OF LINES : Providing of earthing with excavation of earth pit (0.6 x0.6x2.4 Mts.) duly filling with bentonite, sand & brick masonry on four sides of the earth pit and plastering to brick masonry work, running of earth wire etc., complete, exclud
LOADING & UNLOADING 33 KV VCBs along with Panel boards
UNLOADING of 33 KV VCBs&Panel boards
Transport of Cond Drum,VCBs >20 & <30Km
Fabrication and connecting to risers from earth mat to structures, equipment, marshalling boxes, electrical panels, PLCC panels, fencing posts etc.,.M.S./ G.S. Flat 50x6mm / 50 x 8 mm ( Above ground)
Laying of earth mat including excavation of trenches of depth 600mm, welding, connecting to equipment and connecting lightning shield to earth mat and earthing of fence posts, drilling and connecting earth rods including connecting cast iron pipes with the following sizes of MS Flats /GI Flats. including fabrication.75x 8mm MS Flat / GI Flat.
Painting of Name Plates for any equipmen
Lay-4C/10C 2.5Sqmm Control Cable
Excavate-Pit for 33KV VCB
S-GI Bolts & Nuts,Washers etc.,
Alluminum alloy T clamps conforming to A6 of IS 617, 4 bolted with hot dip galvanised bolts and double nuts with spring and flat washers of size M10 x 65 i.e(3/8" x 21/2 " to suit for panther ACSR on all three ways/ on one side and Zebra ACSR on take off side or any other combination for carrying 800 A current rating .
Alluminum alloy Pad clamps conforming to A6 of IS 617, 4 bolted with hot dip galvanised bolts and double nuts with spring and flat washers of size M10 x 65 i.e(3/8" x 21/2 " to suit for twin panther ACSR/Zebra of pad size 100 X 100 X 15mm for carrying 1200 A current rating .
Labour charges for Fixing of all types of clamps
Painting of operating rods of 33kV, 11kV AB switches with post office red colour (including cost of paint)
Erect-24V Batery with Chrgr incl grot-SS
Stringing of bus with panther conductor including jumpering etc., complete to all the equipment in SS fixing to all clamps and e
ERECTION OF LINES : Paving out conductor, providing temporary stays, tensioning, sagging correctly, fixing strain points, transferring to pin points binding, rectification of poles, guys and jumpering etc., including transport of material from road side
LOADING & UNLOADING24 V Battery with charger
Supply <(>&<)> Spreading of 20mm machine crushed metal(HBG) including cost and conveyance of all materials, labour charges etc. complete for finished item of work and as directed by the engineer-in-charge
Supply of Danger boards with clamps
S&F MS Security Fencing Mesh (2"X2")
Fix-150W HP SV/LED/Induction/other lamp
Supply of LC Boards
SupRubber mats( 6’x3’)size for indoorSS
Supply of Gum Boots
S-Discharge Hse Pipe 50L Co2 FireExtgr
CRS Masonary CM(1:6) 2nd Sort
UNLOADING of 24 V Battery with charger
Previously 28.07.2020 - Laying of 2nd cable in excavated trench
Supply of 33KV 3x400Sqmm O/D End Kit
Supply of 33KV 3x400Sqmm Straight through Kit
ERECTION OF LINES : UG Cables Jointing : Straight through joints 33 KV 3 x 400 Sqmm XLPE Cable
ERECTION OF LINES : UG Cables Jointing : Outdoor / Indoor end termination33 KV 3 x 400 Sqmm XLPE Cable
Lay-DR 33KV 3x400sqmm UG Cb CC/BT Compsr
Supply of 150 mm Hume pipe of class NP3 with compresive strength of 35N/mm2 for 28 days curing,barewall thickness of 30mm,1.25kG linear/meter and withstanding capability of 22.50KN/linear meter as per IS 458-1993.
Excavation of earth pit, supply of cast iron pipe with flange on one end (as per ISS7181/86) of nominal dia 125mm and 2.75 meters long in side the pit including supply and fixing RCC collars 0.75 meter dia (OD), 50mm thick and 0.60meters long complete as per APTRANSCO standards
CIVIL WORKS : Excavation of pits in hard rock requiring blasting.0.92 M x 0.92M x 2.3M (3.0" x 3.0" x 7.6")
ERECTION OF LINES : Providing of earthing with excavation of earth pit (0.6 x0.6x2.4 Mts.) duly filling with bentonite, sand & brick masonry on four sides of the earth pit and plastering to brick masonry work, running of earth wire etc., complete, exclud
Mass concreting of supports erected with CC (1:4:8) using 40 mm, HB G metal including the cost of metal, sand and curing etc. Including the cost of cement
Fabrication of 175x85/150x75mm RS joist pieces upto 12.5 meters length by welding joint together by means of 50x6mm flat and MS channel on either side including the cost of consumable.
Erection of 9/10/11Meter Box pole
S-GI Bolts & Nuts,Washers etc.,
ERECTION OF EQUIPMENT Substations Erection of 33 KV AB Switch including alignment and earthing
LOADING & UNLOADING33 KV AB Switch Conventional type 400/800 A
Supply of 9" B Class with 7.3mm thickness and weight 28.8Kg per meter
Hring of Crane for mounting equipment
Testing & Commissioning of Equipment
Coping & Muffing-Iron Pole
Supply of Danger boards with clamps
UNLOADING of 33 KV AB SWCH Con 400/800 A
Consultation charges for providing traffic diversions and meeting other exegencies for excution of work during late night hours and wie hours
Consultan Chrgs for Pursuing Rd Cutting
Laying of 33<(>&<)>11KV UG cable by HDD method with casing HDPE pipe of 160mm PN4 PE 80 as per IS4984
Carrying out the ground penetrating radar survey of route to locate the utilities like cable <(>&<)> pipes etc in Narmal soil <(>&<)> hard rock
Smart RFID markers SM1500 Power RFID based Electronic cable/pipe marker 22.5cms Dia, 15.m Depth Range, 10 Digits Hexadecimal ID code, 134.0KHZ frequency
Raise-DR 33KV 3x400sqmm UG Cb on support
Painting of RS Joist, Rail pole including cross arms and clamps with one coat of red oxid and two coats of Al. paint including cost of paint and consumables
TRANSPORT Transport of steel including line materials such as cross arms, clamps, hardware, cable (loose) and other line materials.Above 10 KM and upto 20 KM
LOADING & UNLOADING R.S. Joists 175 x 85 mm
UNLOADING of R.S. Joists 175 x 85 mm
LOADING & UNLOADING M.S.Channels, Angles, Flats & Rods etc.,
UNLOADING of MS Channel,Angles,Flats&Rod
Supply of RCC cable Joint markers of size 700 X 240 X 75 mm duly engraving with 5 mm thick letters , CPDCL 33000/11000 Cable/Cable joint fixing the 300mm below ground level and 400mm above ground level confirming to IS 5820 2001
Detailed survey of line and cable including peg marking and necessary tree clearance
Cut-Tree Branch(LT/11/33)&Trnsprt Debris
Painting of operating rods of 33kV, 11kV AB switches with post office red colour (including cost of paint)
AB Switch Coil Earthing GI No. 8 Wire
S-Earthing GI flat 25x3 mm incl material
S-CI Pipe earthing 100mm dia 2.75m long
ERECTION OF LINES : Providing of RCC collar to existing earth pit.Providing of RCC Collar guarding to the existing earth pits with damaged masonry including dismantling and removing of existing masonry and fixing the RCC collar of 0.60 M dia X 0.50 M he
Fabrication of Main and Auxiliary structures with welding using raw steel such as RS joist, M.S.Angles, Plates, Channels, including the supply and fabrication of 6mm base plate to the RS-Joist poles excluding cost of Mild Steel and transport charges to substation site.
(*)Material cost for Second coat of 1st Grade Aluminium Paint, brushes, etc
(*) Labour charges for painting including scratching and cleaning of Sub-station structures of 2nd coat of Aluminium .
Material cost for First coat of 1st Grade Aluminium Paint, brushes etc.
Labour charges for painting including scratching and cleaning of Sub-station structures of 1st coat of Aluminium
S-MS Bolts & Nuts,Washers etc.,
Painting of all suppports to a height of 0.3m coping with bituminous paint (black colour) and painting of coping with two coats of white cement (including cost of paint).
PCC with 20mm Metal (1:2:4)
S&Fix-3x300sqmm 11KV UG Cb StrgtThrJoint
Erect-33KV AB Switch in SS
ERECTION OF EQUIPMENT Substations Erection of 33 KV LAS station type including earthing
Cement concrete 1:3:6 ration with 40 MML HBG metal including the cost of all materials and labour complete 1.8 x 1.8 x 0.75 Cum. forVCB plinth
Laying of UG Cable Erection of VCBs33 KV
ERECTION OF LINES : Providing of RCC collar to existing earth pit.Providing of RCC Collar guarding to the existing earth pits with damaged masonry including dismantling and removing of existing masonry and fixing the RCC collar of 0.60 M dia X 0.50 M he
ERECTION OF LINES : Providing of earthing with excavation of earth pit (0.6 x0.6x2.4 Mts.) duly filling with bentonite, sand & brick masonry on four sides of the earth pit and plastering to brick masonry work, running of earth wire etc., complete, exclud
LOADING & UNLOADING 33 KV VCBs along with Panel boards
UNLOADING of 33 KV VCBs&Panel boards
Transport of Cond Drum,VCBs >20 & <30Km
Fabrication and connecting to risers from earth mat to structures, equipment, marshalling boxes, electrical panels, PLCC panels, fencing posts etc.,.M.S./ G.S. Flat 50x6mm / 50 x 8 mm ( Above ground)
Laying of earth mat including excavation of trenches of depth 600mm, welding, connecting to equipment and connecting lightning shield to earth mat and earthing of fence posts, drilling and connecting earth rods including connecting cast iron pipes with the following sizes of MS Flats /GI Flats. including fabrication.75x 8mm MS Flat / GI Flat.
Painting of Name Plates for any equipmen
Lay-4C/10C 2.5Sqmm Control Cable
Excavate-Pit for 33KV VCB
S-GI Bolts & Nuts,Washers etc.,
Alluminum alloy T clamps conforming to A6 of IS 617, 4 bolted with hot dip galvanised bolts and double nuts with spring and flat washers of size M10 x 65 i.e(3/8" x 21/2 " to suit for panther ACSR on all three ways/ on one side and Zebra ACSR on take off side or any other combination for carrying 800 A current rating .
Alluminum alloy Pad clamps conforming to A6 of IS 617, 4 bolted with hot dip galvanised bolts and double nuts with spring and flat washers of size M10 x 65 i.e(3/8" x 21/2 " to suit for twin panther ACSR/Zebra of pad size 100 X 100 X 15mm for carrying 1200 A current rating .
Labour charges for Fixing of all types of clamps
Painting of operating rods of 33kV, 11kV AB switches with post office red colour (including cost of paint)
Erect-24V Batery with Chrgr incl grot-SS
Stringing of bus with panther conductor including jumpering etc., complete to all the equipment in SS fixing to all clamps and e
LOADING & UNLOADING24 V Battery with charger
Supply <(>&<)> Spreading of 20mm machine crushed metal(HBG) including cost and conveyance of all materials, labour charges etc. complete for finished item of work and as directed by the engineer-in-charge
Supply of Danger boards with clamps
S&F MS Security Fencing Mesh (2"X2")
Fix-150W HP SV/LED/Induction/other lamp
Supply of LC Boards
SupRubber mats( 6’x3’)size for indoorSS
Supply of Gum Boots
S-Discharge Hse Pipe 50L Co2 FireExtgr
CRS Masonary CM(1:6) 2nd Sort
UNLOADING of 24 V Battery with charger
Previously 28.07.2020 - Laying of 2nd cable in excavated trench
Supply of 33KV 3x400Sqmm O/D End Kit
Supply of 33KV 3x400Sqmm Straight through Kit
ERECTION OF LINES : UG Cables Jointing : Straight through joints 33 KV 3 x 400 Sqmm XLPE Cable
ERECTION OF LINES : UG Cables Jointing : Outdoor / Indoor end termination33 KV 3 x 400 Sqmm XLPE Cable
Lay-DR 33KV 3x400sqmm UG Cb CC/BT Compsr
Supply of 150 mm Hume pipe of class NP3 with compresive strength of 35N/mm2 for 28 days curing,barewall thickness of 30mm,1.25kG linear/meter and withstanding capability of 22.50KN/linear meter as per IS 458-1993.
Excavation of earth pit, supply of cast iron pipe with flange on one end (as per ISS7181/86) of nominal dia 125mm and 2.75 meters long in side the pit including supply and fixing RCC collars 0.75 meter dia (OD), 50mm thick and 0.60meters long complete as per APTRANSCO standards
CIVIL WORKS : Excavation of pits in hard rock requiring blasting.0.92 M x 0.92M x 2.3M (3.0" x 3.0" x 7.6")
ERECTION OF LINES : Providing of earthing with excavation of earth pit (0.6 x0.6x2.4 Mts.) duly filling with bentonite, sand & brick masonry on four sides of the earth pit and plastering to brick masonry work, running of earth wire etc., complete, exclud
Mass concreting of supports erected with CC (1:4:8) using 40 mm, HB G metal including the cost of metal, sand and curing etc. Including the cost of cement
Fabrication of 175x85/150x75mm RS joist pieces upto 12.5 meters length by welding joint together by means of 50x6mm flat and MS channel on either side including the cost of consumable.
Erection of 9/10/11Meter Box pole
S-GI Bolts & Nuts,Washers etc.,
ERECTION OF EQUIPMENT Substations Erection of 33 KV AB Switch including alignment and earthing
Transport of Cond Drum,VCBs >10 & <20Km
LOADING & UNLOADING33 KV AB Switch Conventional type 400/800 A
S-25W LED fixture set
Supply of 9" B Class with 7.3mm thickness and weight 28.8Kg per meter
Hring of Crane for mounting equipment
Testing & Commissioning of Equipment
Coping & Muffing-Iron Pole
Supply of Danger boards with clamps
UNLOADING of 33 KV AB SWCH Con 400/800 A
Consultation charges for providing traffic diversions and meeting other exegencies for excution of work during late night hours and wie hours
Consultan Chrgs for Pursuing Rd Cutting
Laying of 33<(>&<)>11KV UG cable by HDD method with casing HDPE pipe of 160mm PN4 PE 80 as per IS4984
Carrying out the ground penetrating radar survey of route to locate the utilities like cable <(>&<)> pipes etc in Narmal soil <(>&<)> hard rock
Smart RFID markers SM1500 Power RFID based Electronic cable/pipe marker 22.5cms Dia, 15.m Depth Range, 10 Digits Hexadecimal ID code, 134.0KHZ frequency
Raise-DR 33KV 3x400sqmm UG Cb on support
S-M+3 Tower GALV
Erect- M+3 Tower GALV
S-Mat. for Extn of M+3 Tower by 3M GALV
Erect-Extn of 3M for M+3 Tower GALV
Excvt Pit Hard wt Blst 1.2Mx1.2Mx3.3M
Mass concreting of supports erected with CC (1:4:8) using 40 mm, HB G metal including the cost of metal, sand and curing etc. Including the cost of cement
Paving out conductor, providing temporary stays, tensioning, sagging correctly, transferring to pin points binding, rectification of poles, guys and jumpering etc., including transport of material from road side to location. 11 KV lines : "100 Sqmm Conductor (6 Conductors) - DC"
Formation of Vertical Cut point for 33 KV line excluding pole erection and stays
Formation of (Vertical/ Horizontal) Cut point for 11 KV line excluding pole erection and stays
Painting of RS Joist, Rail pole including cross arms and clamps with one coat of red oxid and two coats of Al. paint including cost of paint and consumables
TRANSPORT Transport of steel including line materials such as cross arms, clamps, hardware, cable (loose) and other line materials.Above 10 KM and upto 20 KM
LOADING & UNLOADING R.S. Joists 175 x 85 mm
UNLOADING of R.S. Joists 175 x 85 mm
LOADING & UNLOADING M.S.Channels, Angles, Flats & Rods etc.,
UNLOADING of MS Channel,Angles,Flats&Rod
Supply of RCC cable Joint markers of size 700 X 240 X 75 mm duly engraving with 5 mm thick letters , CPDCL 33000/11000 Cable/Cable joint fixing the 300mm below ground level and 400mm above ground level confirming to IS 5820 2001
LOADING & UNLOADING Conductor drums
UNLOADING of Conductor drums
Detailed survey of line and cable including peg marking and necessary tree clearance
Cut-Tree Branch(LT/11/33)&Trnsprt Debris
Painting of operating rods of 33kV, 11kV AB switches with post office red colour (including cost of paint)
AB Switch Coil Earthing GI No. 8 Wire
S-Earthing GI flat 25x3 mm incl material
LOADING of 33KV Metal parts-bag of 25no
UNLOADING of 33 KV Metal parts-bagof 25
LOADING & UNLOADING33 KV Pins -35Nos each Bag
UNLOADING of 33 KV Pins
Drill-Hole in HardRock 4Legs Per Tower
S-CI Pipe earthing 100mm dia 2.75m long
ERECTION OF LINES : Providing of RCC collar to existing earth pit.Providing of RCC Collar guarding to the existing earth pits with damaged masonry including dismantling and removing of existing masonry and fixing the RCC collar of 0.60 M dia X 0.50 M he
Fabricate-LT 3Ph 5Wire Side Arm
Fabricate-11KV Side Arm
Formation of (Vertical/ Horizontal) Cut point for 11 KV line excluding pole erection and stays
Formation of (Vertical / Horizontal) Cut point for LT line excluding pole erection and stays Single Circuit
Restring-LT 3-Ph 55Sqmm 5 Conduct
Restring-55 Sqmm SC-3 Conductors
Dismantle-Spun poles 11 Mtrs PSCC
Painting of RS Joist, Rail pole including cross arms, clamps with two coats of Al. paint including cost of paint and consumables."
Fabrication of Main and Auxiliary structures with welding using raw steel such as RS joist, M.S.Angles, Plates, Channels, including the supply and fabrication of 6mm base plate to the RS-Joist poles excluding cost of Mild Steel and transport charges to substation site.
(*)Material cost for Second coat of 1st Grade Aluminium Paint, brushes, etc
(*) Labour charges for painting including scratching and cleaning of Sub-station structures of 2nd coat of Aluminium .
Material cost for First coat of 1st Grade Aluminium Paint, brushes etc.
Labour charges for painting including scratching and cleaning of Sub-station structures of 1st coat of Aluminium
S-MS Bolts & Nuts,Washers etc.,
Painting of all suppports to a height of 0.3m coping with bituminous paint (black colour) and painting of coping with two coats of white cement (including cost of paint).
S&Fix-3x300sqmm 11KV UG Cb StrgtThrJoint
PCC with 20mm Metal (1:2:4)
Dismantling of 100 Sqmm conductor SC
Previously 28.07.2020 - Laying of 2nd cable in excavated trench
Supply of 33KV 3x400Sqmm O/D End Kit
Supply of 33KV 3x400Sqmm Straight through Kit
ERECTION OF LINES : UG Cables Jointing : Straight through joints 33 KV 3 x 400 Sqmm XLPE Cable
ERECTION OF LINES : UG Cables Jointing : Outdoor / Indoor end termination33 KV 3 x 400 Sqmm XLPE Cable
Lay-DR 33KV 3x400sqmm UG Cb CC/BT Compsr
Supply of 150 mm Hume pipe of class NP3 with compresive strength of 35N/mm2 for 28 days curing,barewall thickness of 30mm,1.25kG linear/meter and withstanding capability of 22.50KN/linear meter as per IS 458-1993.
CIVIL WORKS : Excavation of pits in hard rock requiring blasting.0.92 M x 0.92M x 2.3M (3.0" x 3.0" x 7.6")
ERECTION OF LINES : Providing of earthing with excavation of earth pit (0.6 x0.6x2.4 Mts.) duly filling with bentonite, sand & brick masonry on four sides of the earth pit and plastering to brick masonry work, running of earth wire etc., complete, exclud
Mass concreting of supports erected with CC (1:4:8) using 40 mm, HB G metal including the cost of metal, sand and curing etc. Including the cost of cement
Fabrication of 175x85/150x75mm RS joist pieces upto 12.5 meters length by welding joint together by means of 50x6mm flat and MS channel on either side including the cost of consumable.
Erection of 9/10/11Meter Box pole
S-GI Bolts & Nuts,Washers etc.,
ERECTION OF EQUIPMENT Substations Erection of 33 KV AB Switch including alignment and earthing
LOADING & UNLOADING33 KV AB Switch Conventional type 400/800 A
Supply of 9" B Class with 7.3mm thickness and weight 28.8Kg per meter
Hring of Crane for mounting equipment
Testing & Commissioning of Equipment
Coping & Muffing-Iron Pole
Supply of Danger boards with clamps
UNLOADING of 33 KV AB SWCH Con 400/800 A
Consultation charges for providing traffic diversions and meeting other exegencies for excution of work during late night hours and wie hours
Consultan Chrgs for Pursuing Rd Cutting
Laying of 33<(>&<)>11KV UG cable by HDD method with casing HDPE pipe of 160mm PN4 PE 80 as per IS4984
Carrying out the ground penetrating radar survey of route to locate the utilities like cable <(>&<)> pipes etc in Narmal soil <(>&<)> hard rock
Smart RFID markers SM1500 Power RFID based Electronic cable/pipe marker 22.5cms Dia, 15.m Depth Range, 10 Digits Hexadecimal ID code, 134.0KHZ frequency
Raise-DR 33KV 3x400sqmm UG Cb on support
Painting of RS Joist, Rail pole including cross arms and clamps with one coat of red oxid and two coats of Al. paint including cost of paint and consumables
TRANSPORT Transport of steel including line materials such as cross arms, clamps, hardware, cable (loose) and other line materials.Above 10 KM and upto 20 KM
LOADING & UNLOADING R.S. Joists 175 x 85 mm
UNLOADING of R.S. Joists 175 x 85 mm
LOADING & UNLOADING M.S.Channels, Angles, Flats & Rods etc.,
UNLOADING of MS Channel,Angles,Flats&Rod
Supply of RCC cable Joint markers of size 700 X 240 X 75 mm duly engraving with 5 mm thick letters , CPDCL 33000/11000 Cable/Cable joint fixing the 300mm below ground level and 400mm above ground level confirming to IS 5820 2001
Detailed survey of line and cable including peg marking and necessary tree clearance
Cut-Tree Branch(LT/11/33)&Trnsprt Debris
Painting of operating rods of 33kV, 11kV AB switches with post office red colour (including cost of paint)
AB Switch Coil Earthing GI No. 8 Wire
S-Earthing GI flat 25x3 mm incl material
S-CI Pipe earthing 100mm dia 2.75m long
ERECTION OF LINES : Providing of RCC collar to existing earth pit.Providing of RCC Collar guarding to the existing earth pits with damaged masonry including dismantling and removing of existing masonry and fixing the RCC collar of 0.60 M dia X 0.50 M he
Painting of RS Joist, Rail pole including cross arms, clamps with two coats of Al. paint including cost of paint and consumables."
Fabrication of Main and Auxiliary structures with welding using raw steel such as RS joist, M.S.Angles, Plates, Channels, including the supply and fabrication of 6mm base plate to the RS-Joist poles excluding cost of Mild Steel and transport charges to substation site.
(*)Material cost for Second coat of 1st Grade Aluminium Paint, brushes, etc
(*) Labour charges for painting including scratching and cleaning of Sub-station structures of 2nd coat of Aluminium .
Material cost for First coat of 1st Grade Aluminium Paint, brushes etc.
Labour charges for painting including scratching and cleaning of Sub-station structures of 1st coat of Aluminium
S-MS Bolts & Nuts,Washers etc.,
Painting of all suppports to a height of 0.3m coping with bituminous paint (black colour) and painting of coping with two coats of white cement (including cost of paint).
PCC with 20mm Metal (1:2:4)
S&Fix-3x300sqmm 11KV UG Cb StrgtThrJoint
Erect-33KV AB Switch in SS
ERECTION OF LINES : Providing of RCC collar to existing earth pit.Providing of RCC Collar guarding to the existing earth pits with damaged masonry including dismantling and removing of existing masonry and fixing the RCC collar of 0.60 M dia X 0.50 M he
ERECTION OF LINES : Providing of earthing with excavation of earth pit (0.6 x0.6x2.4 Mts.) duly filling with bentonite, sand & brick masonry on four sides of the earth pit and plastering to brick masonry work, running of earth wire etc., complete, exclud
Fabrication and connecting to risers from earth mat to structures, equipment, marshalling boxes, electrical panels, PLCC panels, fencing posts etc.,.M.S./ G.S. Flat 50x6mm / 50 x 8 mm ( Above ground)
Laying of earth mat including excavation of trenches of depth 600mm, welding, connecting to equipment and connecting lightning shield to earth mat and earthing of fence posts, drilling and connecting earth rods including connecting cast iron pipes with the following sizes of MS Flats /GI Flats. including fabrication.75x 8mm MS Flat / GI Flat.
Painting of Name Plates for any equipmen
S-GI Bolts & Nuts,Washers etc.,
Painting of operating rods of 33kV, 11kV AB switches with post office red colour (including cost of paint)
Supply of Danger boards with clamps
S-33KV TreeRetardnt XLPE UG Cb 3x400Sqmm
Previously 28.07.2020 - Laying of 2nd cable in excavated trench
Supply of 33KV 3x400Sqmm O/D End Kit
Supply of 33KV 3x400Sqmm Straight through Kit
ERECTION OF LINES : UG Cables Jointing : Straight through joints 33 KV 3 x 400 Sqmm XLPE Cable
ERECTION OF LINES : UG Cables Jointing : Outdoor / Indoor end termination33 KV 3 x 400 Sqmm XLPE Cable
Lay-DR 33KV 3x400sqmm UG Cb CC/BT Compsr
Supply of 150 mm Hume pipe of class NP3 with compresive strength of 35N/mm2 for 28 days curing,barewall thickness of 30mm,1.25kG linear/meter and withstanding capability of 22.50KN/linear meter as per IS 458-1993.
Excavation of earth pit, supply of cast iron pipe with flange on one end (as per ISS7181/86) of nominal dia 125mm and 2.75 meters long in side the pit including supply and fixing RCC collars 0.75 meter dia (OD), 50mm thick and 0.60meters long complete as per APTRANSCO standards
CIVIL WORKS : Excavation of pits in hard rock requiring blasting.0.92 M x 0.92M x 2.3M (3.0" x 3.0" x 7.6")
ERECTION OF LINES : Providing of earthing with excavation of earth pit (0.6 x0.6x2.4 Mts.) duly filling with bentonite, sand & brick masonry on four sides of the earth pit and plastering to brick masonry work, running of earth wire etc., complete, exclud
Mass concreting of supports erected with CC (1:4:8) using 40 mm, HB G metal including the cost of metal, sand and curing etc. Including the cost of cement
Fabrication of 175x85/150x75mm RS joist pieces upto 12.5 meters length by welding joint together by means of 50x6mm flat and MS channel on either side including the cost of consumable.
Erection of 9/10/11Meter Box pole
S-GI Bolts & Nuts,Washers etc.,
ERECTION OF EQUIPMENT Substations Erection of 33 KV AB Switch including alignment and earthing
Transport of Cond Drum,VCBs >10 & <20Km
LOADING & UNLOADING33 KV AB Switch Conventional type 400/800 A
Supply of 9" B Class with 7.3mm thickness and weight 28.8Kg per meter
Hring of Crane for mounting equipment
Testing & Commissioning of Equipment
Coping & Muffing-Iron Pole
Supply of Danger boards with clamps
UNLOADING of 33 KV AB SWCH Con 400/800 A
Consultation charges for providing traffic diversions and meeting other exegencies for excution of work during late night hours and wie hours
Consultan Chrgs for Pursuing Rd Cutting
Laying of 33<(>&<)>11KV UG cable by HDD method with casing HDPE pipe of 160mm PN4 PE 80 as per IS4984
Carrying out the ground penetrating radar survey of route to locate the utilities like cable <(>&<)> pipes etc in Narmal soil <(>&<)> hard rock
Smart RFID markers SM1500 Power RFID based Electronic cable/pipe marker 22.5cms Dia, 15.m Depth Range, 10 Digits Hexadecimal ID code, 134.0KHZ frequency
Raise-DR 33KV 3x400sqmm UG Cb on support
S-M+3 Tower GALV
Erect- M+3 Tower GALV
S-Mat. for Extn of M+3 Tower by 3M GALV
Erect-Extn of 3M for M+3 Tower GALV
Excvt Pit Hard wt Blst 1.2Mx1.2Mx3.3M
Mass concreting of supports erected with CC (1:4:8) using 40 mm, HB G metal including the cost of metal, sand and curing etc. Including the cost of cement
ERECTION OF LINES : Paving out conductor, providing temporary stays, tensioning, sagging correctly,fixing strain points, transferring to pin points binding, rectification of poles, guys and jumpering etc., including transport of material from road side
Formation of Vertical Cut point for 33 KV line excluding pole erection and stays
Formation of (Vertical/ Horizontal) Cut point for 11 KV line excluding pole erection and stays
Painting of RS Joist, Rail pole including cross arms and clamps with one coat of red oxid and two coats of Al. paint including cost of paint and consumables
TRANSPORT Transport of steel including line materials such as cross arms, clamps, hardware, cable (loose) and other line materials.Above 10 KM and upto 20 KM
LOADING & UNLOADING R.S. Joists 175 x 85 mm
UNLOADING of R.S. Joists 175 x 85 mm
LOADING & UNLOADING M.S.Channels, Angles, Flats & Rods etc.,
UNLOADING of MS Channel,Angles,Flats&Rod
Supply of RCC cable Joint markers of size 700 X 240 X 75 mm duly engraving with 5 mm thick letters , CPDCL 33000/11000 Cable/Cable joint fixing the 300mm below ground level and 400mm above ground level confirming to IS 5820 2001
LOADING & UNLOADING Conductor drums
UNLOADING of Conductor drums
Detailed survey of line and cable including peg marking and necessary tree clearance
Cut-Tree Branch(LT/11/33)&Trnsprt Debris
Painting of operating rods of 33kV, 11kV AB switches with post office red colour (including cost of paint)
AB Switch Coil Earthing GI No. 8 Wire
S-Earthing GI flat 25x3 mm incl material
LOADING of 33KV Metal parts-bag of 25no
UNLOADING of 33 KV Metal parts-bagof 25
LOADING & UNLOADING33 KV Pins -35Nos each Bag
UNLOADING of 33 KV Pins
Drill-Hole in HardRock 4Legs Per Tower
S-CI Pipe earthing 100mm dia 2.75m long
ERECTION OF LINES : Providing of RCC collar to existing earth pit.Providing of RCC Collar guarding to the existing earth pits with damaged masonry including dismantling and removing of existing masonry and fixing the RCC collar of 0.60 M dia X 0.50 M he
Fabricate-LT 3Ph 5Wire Side Arm
Fabricate-11KV Side Arm
Formation of (Vertical/ Horizontal) Cut point for 11 KV line excluding pole erection and stays
Formation of (Vertical / Horizontal) Cut point for LT line excluding pole erection and stays Single Circuit
Restring-LT 3-Ph 55Sqmm 5 Conduct
Restring-55 Sqmm SC-3 Conductors
Painting of RS Joist, Rail pole including cross arms, clamps with two coats of Al. paint including cost of paint and consumables."
Fabrication of Main and Auxiliary structures with welding using raw steel such as RS joist, M.S.Angles, Plates, Channels, including the supply and fabrication of 6mm base plate to the RS-Joist poles excluding cost of Mild Steel and transport charges to substation site.
(*)Material cost for Second coat of 1st Grade Aluminium Paint, brushes, etc
(*) Labour charges for painting including scratching and cleaning of Sub-station structures of 2nd coat of Aluminium .
Material cost for First coat of 1st Grade Aluminium Paint, brushes etc.
Labour charges for painting including scratching and cleaning of Sub-station structures of 1st coat of Aluminium
S-MS Bolts & Nuts,Washers etc.,
Painting of all suppports to a height of 0.3m coping with bituminous paint (black colour) and painting of coping with two coats of white cement (including cost of paint).
S&Fix-3x300sqmm 11KV UG Cb StrgtThrJoint
PCC with 20mm Metal (1:2:4)
Superintending Engineer
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Bid - 11KV KanajigudaFeeder.doc
TENDER_DOCUMENT • 1.17 MB
BOQ-Kanajiguda Feeder.xlsx
TENDER_DOCUMENT • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .