Construction Framed Structure Warehouse at Doabgah Sopore SIDCO

Amount

Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottom lift upto 1.5m including back filling avilable earth in rooms and disposal of surface earth with lead of 100m from site as per directions of Site Engineer.

Providing and laying of stone soling/ boulders (Hand packed) including ramming, dressing and watering & all carriage from source to site.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1:4:8 (1 cement: 4coarse sand: 8 graded stone aggregate 40mm nominal) crushed. Including all carriage from source to site.

Dry random rubble masonry using hard stone in foundation and plinth. Using quarry stone with bond stone including all carriage from source to stite

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, fifnishing and reinforcement. All work upto plinth level 1:1.5:3 (1 cement : 1.5 coarse snad: 3 graded stone agg. 20mm nominal size) including all carriages ftrom source to site.

Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string course, filters, columns, pillars, piers, abutments, posts and struts, etc., upto floor five level excluding cost of centering shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse snad: 3 graded stone agg. 20mm nominal size) including all carriages ftrom source to site.

Reinforced cement concrete work in beams suspended floors, roofs having slope upto 15 degree, landings balconies, shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircase and Spiral Staircases upto floor five level excluding cost of centering shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse snad: 3 graded stone agg. 20mm nominal size) inxcluding all carriages ftrom source to site.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:3:6 (1 cement: 3 coarse sand : 6 graded stone agg. 20mm nominal) crushed. Including all carriage from source to site.

Reinforcement of RCC work including straigtening, cutting, bending, placing in position and binding all complete with TMT Bars.

Centering and shuttering including strutting and propping etc., and including removal of same.:-

a) Foundations, Footings bases of columns etc., for mass concrete.

b) Lintels, Beams, Plinth Beams, Girders, Bressumers and Cantilevers

c) Columns, Pillars, Piers, Abutments, Pots and truts

d) Suspended floors, Roofs, Landings, Balconies and access platform

Filling in Rooms using GSB including levelling watering ramming etc., complete job including all carriage from source to site.

Brick work with FPS bricks of class destination 75 in super structure above plinth upto floor 5th level in cement mortar 1:6 mix ( 1 cement : 6 fine sand). Including all carriage from source to site.

Providing and fixing aluminium chowkats for doors, windows, vetilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up thr gaps at junctions i.e., at top bottom and sides with required EPDM rubber/ neoprene gasket etc., Aluminium sections shall be smooth, rust free, straight, mitre and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ panelling, CP brass/ stainless steel screws all complete as per Architectural drawings and the directions of Engineer-in-Charge. (glazing, panelling to be paid for seperately). powder coated aluminium (minimum thickness of powder coated 50 microns).

15mm plaster in 1:4 mix on brick masonary wllas including all carriages from source to site.

12mm plaster in 1:4 mix on brick masonary wllas including all carriages from source to site.

{Providing and applying plaster of paris putty of 2m thickness over plastered surface to prepare the surface even and smooth all complete.

Providing and fixing shutters of doors, including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required powder coaded aluminium minimum thickness of powder coated aluminium = 50 microns

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade 1 Type 11, in panelling fixed in aluminium doors, windows shutters and partition frames with CP brass/ stainless steel screws etc., complete as per Architectural drawings and directions of Engineer-in-Charge. prelaminated particle board with decorative lamination on both sides.

Providing and fixing shutters of windows & ventolators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required anodised aluminium minimum thickness of powder coated aluminium = 50 microns

Providing and fixing glass panes and glazing clips in steel doors, windows, clerestory windows all complete with 5.5mm thick glass panes.

Cement Concrete flooring1:2:4 (1 cement : 2 coarse sand : 4 graded stone agg.) finished with a flloating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc., complete using 50mm thick 20mm nominal size crushed aggregates. including all carriages from source to site.

Making plinth protection 50mm thick of cement 1:3:6 (1 cement : 3 coarse sand : 6 agg. With nominal size 20mm) over 75mm thick bed of boulders/ stone aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. including all carriages from source to site.

Providing & fixing of vertified double charged floor/ wall tiles in different sizes thickness to be specified by the manufacturer with water adsorption less than 0.08% and conforming to ISI5622 of approved make in all colors and shades laid on 20mm thick bed of cement motar 1:4 mix including pointing the jints with cement and matchig pigment etc., complete size of tile 60x60.

Providing and fixing of 1st quality ceremic glazed tiles conforming to IS : 13553 of minimum thickness 5mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA or equivelent make in all colours, shades except begundy, bottle green, black of any size as approved by ENgineer-in-Charge in skirting, rises of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and joining with grey cement slurry @ 3.3 kg per Sqm including pointing in white cement mixed with matching shade complte. including all carriages from source to site.

Structural steel work welded in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying a acoat of approved steel primer all complete. (TATA, SAIL)

Providing & Fixing colour coated galvanized high rib profile sheets 0.50mm TCT having a crest height of 28 32mm at 195mm pitch & effective width of 975 – 1000mm & length to suit site requirement to the purloins using self drilling and self tapping fasteners & fixing flashing of valleys and ridges of colour coated galvanized plain sheet using self dulling & self tapping fasteners of reputed make as directed. The contractor should give a minimum of 10 years guarantee for sheets against deterioration & leakages across laps, fasteners etc., All types of steel sheets, shall be load tested to satisfy 1.10 times the design wind load & coating thickness to the satisfaction of the Engineer Incharge. Fasteners shall also be load tested including cost & carriage of all involved materials upto site of work complete.

Providing coloured coated galvalume Sheets ridges or hips or valley of width 60cm overall with plain GS sheets fixed with polyner coated J or L hooks, bolts and nuts 8mm dia GI limpet and bitumen washers complete (0.5mm thick with zinc coating not less than 275gms/sqm.)

Providing and fixing ready made galvalume sheet Morkh of required shade & colour of approved brand and manufacture including fixing complet job.

Providing and fixing colour coated galvalume corrogatted sheets in soffit of required shade and colour including all fixtyres complete job.

Finishing walls with textured exterior paint of required shade new work two or more coats applied at the rate 3.28 litre per 10 Sqm ovber and including priming coat of exterior primer applied @ 2.20 kg / 10sqm.

Providing and fixing in position collapsible steel shutters with vertical channels 20x1 0.2mm and braced with flat diagonals 20x5m size with top and bottom rail of L iron 40x40x6m with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles including applying a priming coat of approved steel primer.

Concealed GI B-class (JINDAL, SURYA, ISI etc) pipe including painting with anti corrosive bitumastic paint including cutting chases and making good the wall:-

a) 15mm dia

b) 20mm dia

c) 25mm dia

Providing and fixing fittings of standard quality viz JINDAL, Prakash, SURYA, ISI etc.,

PVC Plain bend 100mm

PVC Plain bend 75 mm

PVC Collar 100mm

PVC Collar 75mm

PVC P-trap 100 mm

PVC P-Trap 75mm

PVC Flow Trap 100mm

PVC Flow Trap 75mm

PVC Door Bend 100mm

PVC Door Bend 75 mm

Providing and fixing vitreous China dual purpose closet suitable for use as squatting pan or European type water closet (AngloIndian WC Pan) with seat lid with CP brass hings and rubber buffers, 10 litre low levelflushing cistern with fitting and brackets, 40mm flush bend 20mm overflow pipe with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherver required. white vitreous China dual purpose WC pan with white solid plastic seat lid with white vitreous china flushing cistern and CP flush bend using (HINDWARE, CERA, KOHLER)

Providing and fixing of following items of approved brand and manufacture viz. (JINDAL, SURYA, ISI etc.)

Union

Providing and fixing of tripple layer water storage tanks of approved quality and make viz. (SINTEX, NATIONAL, PLASTTO etc.,) complete job.

Electric fittings:-

PVC conduit pipes 25mm

PVC bends 25mm dia

Junction boxes 4"thickness

Fan boxes 3"thickness

M/S AL MANSUR CONTRACTORS AND SUPPLIERS

U S CONSTRUCTIONS