Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.1 LAccepted-AOC 018 GROUND FLOOR LEKHRAJ ENCLAVE LEKHRAJ PANNA SECTOR 2 VIKAS NAGAR LUCKNOW UTTAR PRADESH 226022 | LUCKNOW | UTTAR PRADESH | 226022 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹43.6 L+₹3.0 L (7.37%)Rejected-Finance 23 47 25D BHAGABARI ROAD ALLAHPUR ALLAHABAD UP | AGRA | UTTAR PRADESH | 282001 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹53.4 L+₹12.8 L (31.6%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | Rejected-Technical KUTUMB 143 40 VINAYAK NAGAR INDALPUR ROAD NAINI PRAYAGRAJ 211008 | PRAYAGRAJ | UTTAR PRADESH | 211008 | - | Rejected-Technical No in WLR QE Jun 2024 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
12 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (East) Prayagraj
Stanley Road, Teliyarganj, Prayagraj
Upkeep and maint of doors, windows, builders hardware and connected works in JCO/OR MD Accn in Old Cantt Saraswati and Ganga Vihar at Old Cantt Prayagraj.
2024_MES_659572_1
8722/E8
Open Tender
Civil Works
Item Rate
120 days
Prayagraj
As Per NIT
6 documents required · 6 mandatory
₹500
GE (East) Prayagraj
₹90,000
Yes
2 Dec 2024
13 Jun 2024
19 Sept 2024
13 Jun 2024
12 Sept 2024
12 Jul 2024
13 Jun 2024 - 20 Jun 2024
Amount
M&L for brick work with fly ash bricks straight or curved on plan to any radius half brick thick wall built in CM (1: 4).including Demolition of brick work complete all as specified and directed.
M&L brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1: 6 complete all as specified including Demolition of brick work complete all as specified and directed.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (400 X 400 square) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed.
M&L for Coloured Glazed ceramic tiles in vertical surface 450 X 300 X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 10mm thick plaster in cement mortar (1:4) complete all as specified and directed.
Taking down cement plaster on brick or stone walls or ceiling etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified.
M&L for rendering 15 mm thick on fair faces of brick work in CM in 1:4 finished even and fair and mixing with water proofing liquid as per manufacturer instruction (but excluding the cost of water proofing liquid ) external surface complete all as specified and directed.
Supply only Liquid water proofing compound of approved make.
M&L for rendering 10mm thick in CM (1:6) on Brick/ Conc surface finished even and fair on internal surfaces of wall complete all as specified and directed.
M&L for rendering 5 mm thick in CM 1:3 on concrete surface in ceiling complete all as specified and directed.
M&L for preparation of new plastered surface and applying two coat of cement base paint on walls over a coat of primer complete all as specified and directed.
M&L for preparation of new plastered surface and applying two coat of oil bound distemper on walls over a coat of primer complete all as specified and directed.
M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified.
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area not exc 1.5 Sqm each all as specified.
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area exc 1.5 Sqm but n exc 4.00 Sqm each all as specified.
Taking down shutters of any description exc 1.00 Sqm and n. exc 2.00 Sqm each complete all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck indie with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fittied in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing
S&F 125 x 60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete all as specified and directed.
S&F 105 x 60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete all as specified and directed.
M&L cement concrete type C-1 (1:3:6) 20mm graded stone aggregate as in bed blocks for fixing hold fasts and fillling of chowkhats etc. all as specified.
M&L for Rolled mild steel sections conforming to Gde Fe-410-W or Fe-310-W as in framing for cladding, glazing and the like including door frames/ chowkats, cooler stand,gate and door shutter etc fixed with angle cleats and connecting plates, etc complete all as specified and directed.
S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides both face is covered with decorative face veneer with lipping/ frame to match complete all as specified and directed
S&F for 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F 150mm Aluminium handles, cast type, anodised complete all as specified and directed.
S&F 200mm Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.
M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one pink primer complete all as specified.
S&F 100 mm long butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed
M&L for MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
Anodised aluminium frame for doors, windows, ventilators powder coated (Thickness or powder coating not less than 50 micron ) with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
M&L for powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified
S&F 75 mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and directed.
M&L for 4.8 mm thick sheet glass ordinary quality and glazing with beading n exc 0.5 sqm in each pane complete all as specified and as directed.
M&L for 4.8 mm thick frosted sheet glass ordinary quality and glazing with beading n exc 0.5 sqm in each pane complete all as specified and as directed.
Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge.
Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation boards/ slabs/ blankets any thickness incl cover fillets complete all as specified and directed.
M&L for 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework fixed in ceiling complete all as specified.
M&L for Anodised aluminium snap grid frame work size of grid 605x605mm for false ceiling all as specified with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.
S & F PVC Wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.
S&F 140mm Floor door stopper of aluminium alloy body and tongue, with hard drawn steel spring complete all as specified and directed.
S&F 300mm, Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete.
S&F in repair 100 mm aluminium anodised Hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F in repair 75 mm Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F in repair Door Seal length of each door seal is equal to width of door fixed to door bottom rail including all fixing arrangement such as screws ,nails etc complete all as specified.
Taking down Aluminium shutters and dismantling stiles & rails including glass panes/particle board carefully.Refabricating and refixing in frame position using all old material including replacement of required neoprene packing,cleats,screws with necessary Aluminium angle cleat screws etc. complete all as specified and directed by Engineer in charge.
S & F in repair floor door stopper of Aluminium anodised body and tounge anodised with hard drawn steel spring of cover plate length of 150 mm size.
S&F in repair Aluminium die cast body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and directed.
Supply and fix in repairs 250 mm long stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, complete all as specified and directed.
Supply & fix in repair 100mm long hinges extruded aluminium alloy with galvanised mild steel hinge , anodised and fixed, type B-21, complete all as specified and directed.
S&F in repair 100mm size stainless steel handle, fabricated type all as specified and as dierected by Engineer-In-Charge.
S&F in repair 150mm size stainless steel handle, fabricated type all as specified and as dierected by Engineer-In-Charge.
S&F in repair 100 mm long stainless steel barrel tower bolts of extruded section complete all as specified and directed.
S&F in repair 150 mm long stainless steel barrel tower bolts of extruded section complete all as specified and directed.
S&F in repair 200 mm long stainless steel barrel tower bolts of extruded section complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal or wooden frame, glazed with putty or fixed with beads complete all as specified and directed.
S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in Sqm n.exc 0.50 Sqm in each pane complete all as specified and directed.
S&F 4.8 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 in each pane complete all as specified.
S&F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
MDF board, 18 mm thick, interior grade, prelaminated one side with decorative choice lamination, including wooden/ pvc beading, fixed in repair complete all as specified and directed.
Supply and fixing in repair 75 mm dia oval shape stainless steel bright finish handle complete all as specified and directed
S&F in repair 40 mm width Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as sepcified and directed.
100mm Mortice lock, mild steel 4 levers vertical type, size 100 mm complete all as specified and directed.
Magnetic catcher of size 20 mm X 50 mm suitable for cupboard shutter complete all as specified and directed.
Sealing the gap between aluminium frame & adjacent RCC/ Brick/ Stone work by brushing and filling the gap Upto 10 mm depth and 10 mm width by providing weather silicon sealant over backer rod of approved quality complete all as specified and directed as per direction of Engineer-in-charge .
Dismantling boarding any desccription fixed in any position with nails or any other means complete all as specified and directed.
M&L for fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of syn enamel paint on int surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc complete all specified and directed.
M&L for plain fillets. Hard wood square, n.exc 3 sq.cm rectangular or triangular in section, clean sawn, secured with nails or brads complete all as speciied and as directed.
S&F 18 mm thick PVC celuka ply plain white colour both side fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides, top and bottom and shelves inside the cabinets fixed with complete fitting complete all as specified and directed (Density - 575 to 600 Kg/CBM)
Shivagya Engineering (BID ID -3067644)
M/s Rahul Kumar Agrawal (BID ID -3073436)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .