Repair and Renovation of Centralized facilities in Dhanvantri Library in connection with NAAC Accreditation of Jammu University

Amount

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of 1.0 mm thick (avg.) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, two or more coats of approved brand and manufacture including applying additional coats wherever required to achieve even shade and colour.

Distempering (one coat) with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work (Make Asian/Nerolac).

Renewing glass panes, with putty and nails wherever necessary including raking out old putty Float glass panes of thickness 5.0 mm (weight not less than 12.5 Kg/sqm)

Repairs to plaster of thickness 12mm to 20 mm in patches including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish outside the University Campus. With cement mortar 1:4 (1 cement : 4 fine sand)

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades size as approved by Engineer-in-Charge in skirting, risers of steps andexcept burgundy, bottle green, black of any dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 sand) and jointing with grey cement slurry @ 3.3kg per sqm including coarse pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing wooden moulded beading to door and window frames with steel screws, plugs and priming coat on unexposed surface etc. complete:2nd class teak wood of size 50 x 12 mm including applying a priming coat of wood primer and then painting with synthetic enamal paint (Two or more coats) of approved brand and manufacture (Make Asian/Nerolac).

P/F solid plastic seat with lid for pedestal type W.C. pan complete (Parry ware /Hind ware/Cera) White colour

Providing and fixing PTMT angle stop cock 15mm nominal bore, weighing not less than 85gms.

P/F of PVC waste pipe for sink/urinal or wash basin including P.V.C. waste fitting complete Semi Rigid Pipe 32/40 mm

Providing and fixing C.P Brass phase for pillar cock/bib cock (ISI Make) 15 mm nominal bore

Providing and fixing uplasticized PVC connection pipe with brass unions 45 cm length 15 mm nominal bore

P& F CP jet with PVC pipe to be fixed with WC of approved quality.

Providing and fixing PTMT bib cock of approved quality and colour (Make Prayag/Steelbull) 15 mm nominal bore, 86 mm long, weighing not less than 88 gms.

--------do--------- 15 mm nominal bore 122 mm long, weighing not less than 99 gms.

Providing and fixing PTMT pillar cock of approved quality and colour (Make Prayag/Steelbull) 15 mm nominal bore, 107 mm long, weighing not less than 110 gms.

Providing and fixing PTMT grating of approved quality and colour (Make Prayag/Steelbull) 100 mm diameter circular type

Providing and fixing PTMT Angle valve of approved quality and colour (Make Prayag/Steelbull) 15 mm nominal bore

Providing and fixing the following accessories for repair work. PVC Cistern long Bend of standard size

----------do---------- G.I Nipple 15 x 75mm

-----------do---------- G.I Tee 15 mm nominal bore

----------do----------- G.I Elbow 15 mm nominal bore

-----------do---------- C.P waste Coupling 32/40 mm dia

-----------do---------- PVC Cistern Handle

Providing and fixing 750x600 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

providing and fixing low level pvc flushing cistern with all manually controlled device (handle lever) confirm to Is; 7231 (Parryware /Hindware/Cera) 10 liter capacity – white in colour

Supply of labour for different works Carpenter II Class

----------do--------------- Welder II Class

--------------do------------- Mazdoor

Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. Complete 150 x 10 mm

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. Complete 125 mm

Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :Twin rubber stopper

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer in- plate etc.With Stainless Steel cover plate minimum 1.25 mm thickness

Rattan Chand

M/S DALJEET SINGH