Himachal

Cancelled

Works

Civil Works

Provision for ETP/STP (Efflu/swewrage treatment plant) of 150KLD capacity at Chambaghat, Distt. Solan HP

Public Works Department

Solan, Himachal Pradesh

Amount: ₹1.2 CrCloses: 23 Apr 2026Closed

Timeline

Published17 Apr 2026
Closed23 Apr 2026
Cancelled4 May 2026

Corrigenda

Corrigendum

1 updatesLatest on 9 Aug 2026

Cancellation Details

Cancellation of Tender

Cancellation of TenderProvision for ETP/STP (Efflu/swewrage treatment plant) of 150KLD capacity at Chambaghat, Distt. Solan HPReason: Due to admistrative reasons/issuesDocument: cancelled_1.pdf

Published 4 May 2026

Tender Value

₹1.2 Cr

EMD Value

₹2.4 L

Closing Date

23 Apr 2026, 10:00 amClosed

Tender Inviting Organisation

Name

Executive Engineer HPPWD Solan

Address

near new bus stand Solan

Work Description

Construction of structural/civil work including design, supplying, installing, testing and commissioning of sewerage treatment plant of 150 KLD capacity

Tender Information

Tender ID

2026_PWD_134487_1

Reference Number

solan23.04.2026

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Percentage

Period of Work

60 days

Location

Solan

Source Website

Subscribe to view

Eligibility / Pre-Qualification

as per SBD

Documents Required

13 documents required · 13 mandatory

Fee/PreQual/Technical

Required1. Cost of tender and earnest money indicate in Schedule F General Rule NO. 24.1 (.pdf)

Required2. Contractors registration refers general rules and directions No 24.3 of SBD. (.pdf)

Required3. GST registration refers general rules and Directions no 24.4 of SBD. (.pdf)

Required4. Work done certificate and work in hand certificate refer in general rules No 24.5 schedule F Note (.pdf)

Required5. List of machinery, tool plant shown in schedule F with reference to clause 24.6 of SBD affidavit (.pdf)

Required6. Affidavits of correctness of all the documents are submitted is true by the Contractor. (.pdf)

Required7. Others documents. (.pdf)

Required9. Contractor should have to submit the proof of EPF as mentioned in SBD Clause 22 A. (.pdf)

Required10. Work done condition one similar nature of work not less than 40 percent of the estimated cost as (.pdf)

Required12. Contractor should submit mobile number and Email address (.pdf)

Required13. Fill Form NO 8 of SBD as per Directions and Rules No 24.8 and upload PDF documents. (.pdf)

RequiredBid capacity as per SBD 26.2(a) (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹2.4 L

Important Dates

Last Activity

4 May 2026

Published

17 Apr 2026

Bid Opening

23 Apr 2026

Download Starts

17 Apr 2026

Download Ends

23 Apr 2026

Submission Starts

17 Apr 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (29 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Bar Screen Supply, Installation of Manual Bar Screen made of MSEP flat 40x5 mm size, with clear opening of 10 mm, for trapping large size floating impurities from incoming sewage (there will be two bar screen in bar screen chamber of RCC as per direction of Engineer in Charge and as per HP.PWD. specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.	-	set	-	-
2	Air diffusers FOR Effluent Collection tank Supply, installation, testing and commissioning of coarse bubble diffusers system with HDPE/PP (10 kg/cm2 rating ) pipe grid as per direction of Engineer in Charge and as per HP.PWD. specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.	-	set	-	-
3	Raw Effluent Pumps Supply, installation, testing and commissioning of centrifugal submersible raw Effluent lifting pumps to pump effluet from equalisation tank to Flocuulator with casing of cast iron, make: KSB, Grund fos or Kirloskar complete with pressure gauge, NRV and control valve capable of delivering 5 KL per hour Effluent water at minimum head of 15 m & solid handling capacity of 35 mm with low & high level sensors/switches for Auto ON/OFF, continuous duty, suitable for operation on 415 volt 50 Hz, 3 phase AC supply having a minimum horse power rating necessary to drive the above pump - 2 Lots having 2 Pumps each (1W + 1S) as per direction of Engineer in Charge and as per HP.PWD. specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.	-	set	-	-
4	Chemical Dosing Systems For Lime / Alum / Sod. Thio Sulphate Supply, installation, testing and commissioning of dosing pump of Milton/ Prominent/ Minidose / Unitech/ Unitech make,of capacity 100 litre per hour and head 2.0 kg per cm2 , operated on Sodium Thio Sulphate Solution , Alum, Lime . The unit shall consist of 03 no. 500 litters HDPE/ LDPE tank for solution preparation with complete set of pipes, valves and fittings i/c connections as required as per direction of Engineer in Charge and as per HP.PWD. specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.	-	set	-	-
5	Chemical Dosing Systems For Poly Electrolite Supply, installation, testing and commissioning of electro-magnetic dosing pump of Milton/ Prominent/ Minidose / Unitech/ Unitech make,of capacity 6 litre per hour and head 3.0 kg per Sq.cm , operated on Sodium Thio Sulphate Solution . The unit shall consist of one no. 500 litters HDPE/ LDPE tank for solution preparation with complete set of pipes, valves and fittings i/c connections as required.	-	set	-	-
6	Flocculator Supplying, installing, testing and commissioning of MSEP Flocclutaor for 3 KLPH Capacity with Slow speed Agitator of SS 304 for floculation complete with single phase motor for flash mixer.	-	set	-	-
7	Primary Tube settler Supply Installation Testing and commissioning of Primary Tube settler MOC MSEP 5 MM Capacity 3 KLPH with Sludge seperator media of PP/PVC for for solid and liquid separation to be installed in Primary tube settler tank as required as per direction of Engineer in Charge and as per HP.PWD. specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.	-	set	-	-
8	Air diffusers FOR Sewage Collection Tank Supply, installation, testing and commissioning of coarse bubble diffusers system with HDPE/PP (10 kg/cm2 rating ) pipe grid with as required as per direction of Engineer in Charge and as per HP.PWD. specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.	-	set	-	-
9	Raw sewage Pumps : Supply, installation, testing and commissioning of centrifugal submersible raw Sewage lifting pumps to pump effluet from equalisation tank to Anoxic Tanks with casing of cast iron, make: KSB, Grund fos or Kirloskar complete with pressure gauge, NRV and control valve capable of delivering 10 KL per hour Effluent water at minimum head of 15 m & solid handling capacity of 35 mm with low & high level sensors/switches for Auto ON/OFF, continuous duty, suitable for operation on 415 volt 50 Hz, 3 phase AC supply having a minimum horse power rating necessary to drive the above pump - 2 Lots (1W + 1S)as required as per direction of Engineer in Charge and as per HP.PWD. specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.	-	set	-	-
10	Air Diffusion System for MBBR Reactor Supply, installation, testing and commissioning of fine bubble diffusers with Silicon Membrane, having suitable dimensions complete with Aeration grid make it retrievable & to provide clog-free oxygen for MBBR as per requirement for 150 KLD system as required as required as per direction of Engineer in Charge and as per HP.PWD. specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.	-	set	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Cancellation Documents

cancelled_1.pdf

pdf • 0.22 MB

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.54 MB

Work Item Documents

BOQ_198984.xls

BOQ • 0.30 MB

SBD.pdf

Tender Documents • 3.17 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Bar Screen Supply, Installation of Manual Bar Screen made of MSEP flat 40x5 mm size, with clear opening of 10 mm, for trapping large size floating impurities from incoming sewage (there will be two bar screen in bar screen chamber of RCC as per direction of Engineer in Charge and as per HP.PWD. specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

set

Air diffusers FOR Effluent Collection tank Supply, installation, testing and commissioning of coarse bubble diffusers system with HDPE/PP (10 kg/cm2 rating ) pipe grid as per direction of Engineer in Charge and as per HP.PWD. specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

set

Raw Effluent Pumps Supply, installation, testing and commissioning of centrifugal submersible raw Effluent lifting pumps to pump effluet from equalisation tank to Flocuulator with casing of cast iron, make: KSB, Grund fos or Kirloskar complete with pressure gauge, NRV and control valve capable of delivering 5 KL per hour Effluent water at minimum head of 15 m & solid handling capacity of 35 mm with low & high level sensors/switches for Auto ON/OFF, continuous duty, suitable for operation on 415 volt 50 Hz, 3 phase AC supply having a minimum horse power rating necessary to drive the above pump - 2 Lots having 2 Pumps each (1W + 1S) as per direction of Engineer in Charge and as per HP.PWD. specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

set

Chemical Dosing Systems For Lime / Alum / Sod. Thio Sulphate Supply, installation, testing and commissioning of dosing pump of Milton/ Prominent/ Minidose / Unitech/ Unitech make,of capacity 100 litre per hour and head 2.0 kg per cm2 , operated on Sodium Thio Sulphate Solution , Alum, Lime . The unit shall consist of 03 no. 500 litters HDPE/ LDPE tank for solution preparation with complete set of pipes, valves and fittings i/c connections as required as per direction of Engineer in Charge and as per HP.PWD. specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

set

Chemical Dosing Systems For Poly Electrolite Supply, installation, testing and commissioning of electro-magnetic dosing pump of Milton/ Prominent/ Minidose / Unitech/ Unitech make,of capacity 6 litre per hour and head 3.0 kg per Sq.cm , operated on Sodium Thio Sulphate Solution . The unit shall consist of one no. 500 litters HDPE/ LDPE tank for solution preparation with complete set of pipes, valves and fittings i/c connections as required.

set

Flocculator Supplying, installing, testing and commissioning of MSEP Flocclutaor for 3 KLPH Capacity with Slow speed Agitator of SS 304 for floculation complete with single phase motor for flash mixer.

set

Primary Tube settler Supply Installation Testing and commissioning of Primary Tube settler MOC MSEP 5 MM Capacity 3 KLPH with Sludge seperator media of PP/PVC for for solid and liquid separation to be installed in Primary tube settler tank as required as per direction of Engineer in Charge and as per HP.PWD. specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

set

Air diffusers FOR Sewage Collection Tank Supply, installation, testing and commissioning of coarse bubble diffusers system with HDPE/PP (10 kg/cm2 rating ) pipe grid with as required as per direction of Engineer in Charge and as per HP.PWD. specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

set

Raw sewage Pumps : Supply, installation, testing and commissioning of centrifugal submersible raw Sewage lifting pumps to pump effluet from equalisation tank to Anoxic Tanks with casing of cast iron, make: KSB, Grund fos or Kirloskar complete with pressure gauge, NRV and control valve capable of delivering 10 KL per hour Effluent water at minimum head of 15 m & solid handling capacity of 35 mm with low & high level sensors/switches for Auto ON/OFF, continuous duty, suitable for operation on 415 volt 50 Hz, 3 phase AC supply having a minimum horse power rating necessary to drive the above pump - 2 Lots (1W + 1S)as required as per direction of Engineer in Charge and as per HP.PWD. specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

set

Air Diffusion System for MBBR Reactor Supply, installation, testing and commissioning of fine bubble diffusers with Silicon Membrane, having suitable dimensions complete with Aeration grid make it retrievable & to provide clog-free oxygen for MBBR as per requirement for 150 KLD system as required as required as per direction of Engineer in Charge and as per HP.PWD. specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

set