NIT NO: 830/TC/2026-27

NIT SCHEDULE FOR CONSTRUCTION OF 50 BEDED GIRLS HOSTEL BUILDING I/c Water Supply, Sanitary Fittings, Boundry Wall, "F" Type Qtr, Guard Room approach Road & Electrification work at Govt POLYTECHNIC College BALOD (C.G.)

PAC RS 251.81 Lacs

Sr No Department SOR Year Item No Particulars Unit Rate Qty. Amount

1 P.W.D. Building 2015 1.1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. 1.1.1 In all types of soils Cum 185 1561.72 288918

P.W.D. Building 2015 1.6 Extra for every additional lift of 1.5 m or part thereof In all types of soils Cum 26.5 214.85 5694

P.W.D. Building 2015 1.17 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M Cum 65 690.5600000000001 44886

P.W.D. Building 2015 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, ncluding dressing etc.complete. Cum 371 1638.5550000000003 607904

P.W.D. Building 2015 3.1.3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 3.1.3 - 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). Cum 2970 223.913 665022

P.W.D. Building 2015 3.1.5 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). Cum 4073 0.23 937

P.W.D. Building 2015 3.2.1 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work 3.2.1- 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size) Cum 4163 377.75 1572573

P.W.D. Building 2015 3.2.1 + 3.4 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size) Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: Cum 4260.5 375.52 1599903

P.W.D. Building 2015 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete: Kg 54.5 73380.46 3999235

P.W.D. Building 2015 2.1.1 2.1 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: 2.1.1 Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. Sqm 139 1705.72 237095

P.W.D. Building 2015 2.1.4 Edge of slab, breaks in floor and walls upto 200mm. metre 34 53.5 1819

P.W.D. Building 2015 2.1.3 Window sills, anchor blocks, string course, bends, copings, bed plates and like. sqm 184 2.78 512

P.W.D. Building 2015 2.1.8 Beams, lintels, cantilevers & walls Sqm 202 1118.55 225947

P.W.D. Building 2015 2.1.13 Weather shade, chhajja, Cornices and mouldings sqm 294 4.69 1379

P.W.D. Building 2015 2.1.15 Stair cases of all types excluding spiral and folded plate type, including risers and landings Sqm 230 36.31 8351

P.W.D. Building 2015 2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape Sqm 297 844.36 250775

P.W.D. Building 2015 2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) Sqm 235 1529.695 359478

P.W.D. Building 2015 7.5.4 7.5 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: 7.5.4 Cement Mortar 1:6 (1 cement : 6 coarse sand) Cum 3263 193.89 632663

P.W.D. Building 2015 3.13 Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including form work. Cum 4237 7.2 30506

P.W.D. Building 2015 3.15 Applying a coat of hot bitumen VG-10 using @ 1.7kg/ sqm on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. Sqm 93.5 144.06 13470

P.W.D. Building 2015 7.5.4 + 7.6 7.5 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: 7.5.4 Cement Mortar 1:6 (1 cement : 6 coarse sand) Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth Cement Mortar 1:6 (1 cement : 6 coarse sand) Cum 3384 285.68 966741

P.W.D. Building 2015 F.F. Cum 3505 56.53 198138

P.W.D. Building 2015 7.11 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level upto plinth level: Sqm 382 291.35 111296

P.W.D. Building 2015 7.2 Extra for providing and placing in position hopping 25x1.60 mm or 2 Nos 6mm dia MS bars reinforcement at every third course of half brick masonry. Sqm 62.5 393.11 24569

P.W.D. Building 2015 8.51.2 8.51 Providing and fixing 38 mm thick wooden shelves supported on 40x40x6 mm T or L in brackets fixed at suitable distance in 75x75x150mm blocks of cement concrete 1:2:4: 8.51.2 Bijasal, Haldu, Benteak, Khair Sqm 2955 91.2 269496

P.W.D. Building 2015 9.16 Providing and fixing M.S. frames of doors, windows, ventilators and cupboards joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Kg 73.5 1445.33 106232

P.W.D. Building 2015 8.14.2 Providing and fixing flush door shutters, core of block board construction with frame of first class hard wood and well matched first class Indian teak ply veneering on one face and commercial ply veneering on the other face of the shutter with vertical grains, cross bands and face veneering excluding hinges. 8.14.2 35 mm. thick (single leaf) Sqm 1688 144.49 243899

P.W.D. Building 2015 8.15 Extra for double leaf shutter instead of single leaf. Sqm 52 11.34 590

P.W.D. Building 2015 8.18.3 Providing and fixing lipping with second class teak wood lipping on all edges of shutters. 8.18.3 35 x 6 mm size RM 54.5 441.5 24062

P.W.D. Building 2015 8.139.1 Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. 8.139.1 250 x10mm Each 97 77 7469

P.W.D. Building 2015 8.139.2 200 x 10mm Each 70.5 51 3596

P.W.D. Building 2015 8.140.1 Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete. 8.140.1 150 mm Each 24.5 132 3234

P.W.D. Building 2015 8.125.1 Providing and fixing aluminium door mounted door stopper with necessary nickel plated iron screws etc complete. 8.125.1 100 mm long Each 45 81 3645

P.W.D. Building 2015 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. Kg 67.5 1629.55 109995

P.W.D. Building 2015 11.1.2 Providing and making 6mm thick cement plaster of mix: 11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand) Sqm 87 1479.5200000000002 128718

P.W.D. Building 2015 11.1.1 In Cement mortar 1:3 (1 cement : 3 fine sand) Sqm 93 15.22 1415

P.W.D. Building 2015 11.2.4 Providing and making 12mm thick cement plaster of mix: 11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) Sqm 91.5 1839.3 168296

P.W.D. Building 2015 11.2.1 In cement Mortar 1:3 (1 cement : 3 fine sand) sqm 115 35 4025

P.W.D. Building 2015 11.3.4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: 11.3.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) Sqm 107 4076.7699999999995 436214

P.W.D. Building 2015 12.76.1 amm Providing and laying glazed vitrified floor tiles(GVT/PGVT) with digital printof random design with water absorption less than 0.05% and conforming to IS : 15622-2017 of l st qunlity of approved make in all colours, shades and size mentioned below (+/- 10 mm ),laid on 20 mm thick cement mortar 1:4( 1 cement and matching pigments etc. complete. Size600x600mm thickness 9to 10mm Sqm 964 914.5 881578

P.W.D. Building 2015 12.7.1 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete. 12.7.1 Size upto 200x300mm Sqm 587 436.13 256008

P.W.D. Building 2015 12.9.2 Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. 12.9.2 Size above 300x300mm Sqm 728 151.08 109986

P.W.D. Building 2015 12.9.1 Size 300x300mm Sqm 692 100.51 69553

P.W.D. Building 2015 14.59 amm Providing and applying Polymam c cement primer on all surface applied @ 0.80 litrs/1O sqm as per relevant I S. code 1 5489:1974 (product such as Birla xvhite primacoat/activcoat, Asian Trucare , Dulux interior cement primer, Opus Cali sta /11 O ) with all tool tackles and labour etc. complete for the work . Sqm 29 5751.33 166789

P.W.D. Building 2015 14.63 amm Providing and applying Economy Plastic emulsion paint w5th roller application minimum' three coats appied 1.25 lit / 10 Sqm up to final firñsh as per relevant I.S. Code 154 89 -2013 Type - I Class D & C (Glossy and Semi Glossy Finish) of required shade (product such as Tractor ernul sion , Du1u.x Promise, Nerolac Bueaty Silver, Berger bisorJbreeze , Opus 130/ Style Paint) ‘inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required xvith all tools tackles and labour corriplete for the xvork . ( Vith 2 Year Sqm 74 4059.73 300420

P.W.D. Building 2015 14.68 amm Providing and applying on exterior surface with PREMItJM Exterior emulsion paint of required shade to give protective and water proof finish minimum 3 coats applied 1.40 lit / 10Sqm up to final finish as per relevant I.S Code 15489:2013 Type -2 Class D , C (Glossy /Semi Glossy finish ) (Product such as Asian Apex ,Dulux Weather Shield Prima E900 , Berger Weathercoat Antidust , Nerolac Everlas Excel , Nippon Sumo Etra, Opus True flex) inclusive of providing abro tape on edges and articleand cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work.(With 3Year Warranty.) Sqm 84 1691.6 142094

P.W.D. Building 2015 14.72 amm Providing and applying satin/matt finish Enamel paiint rriimimum 2 coats in all surface applying (@i O.75 lit/ 1 O Sqm up to required finish as per relevant I.S. code 2932' 2O1 3 of (Product such as Asian satin Enamel. Dulux Promise Premium Enamel, Nerolac Synthetic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour ctc. complete for the work. Sqm 120 600.62 72074

P.W.D. Building 2015 8.137.1 Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 8.137.1 300mm Each 238 128 30464

P.W.D. Building 2015 12.65.2 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum ompressive strength of 250 kg/sq.cm 12.65.2 Pigment Coloured (rubber mould) precast interlock concrete blocks Sqm 632 83.76 52936

P.W.D. Building 2015 8.132.1 Providing and fixing stainless steel butt hinges IS : 12817 marked with necessary stainless steel screws etc complete. 8.132.1 150x2.5mm (heavy) Each 97.5 192 18720

P.W.D. Building 2015 9.57.1 9.57 Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete 9.57.1 SS Grade 204 Kg 467 180 84060

P.W.D. Building 2015 9.18.3 Providing and fixing in position doors, windows and ventilators frames made of cold rolled pressed steel sheet framed profiles made from commercial M.S. Sheets conforming to I.S. 513 of 1973 and as per general specifications of I.S 4351 including hinges jamb, lock jamb, steel butt hinges, base tie, joints mitred and welded with 10cm long legs of size 15x3mm M.S. flat, embedded in cement concrete blocks 15x10x10cm size of grade M-10 or rawl plugs and screws or with fixing clips or with bolts and nuts including neatly compacted filling M-10 cement concrete in profile section applying a priming coat of red oxide zinc chromate primer. 9.18.3 Single rebate/ mullion 100mmx50mm size, 1.25mm thick sheet. metre 391 35.8 13998

P.W.D. Building 2015 9.18.5 Double rebate 115mmx50mm size, 1.6mm thick sheet metre 528 5.2 2746

P.W.D. Building 2015 8.148.2 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge 8.148.2 Extruded section Profile size 42x50 mm. metre 196 9.9 1940

P.W.D. Building 2015 8.149.2 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. 8.149.2 30 mm thick door shutters with styles and rails of size 60x30 mm sqm 2488 3.15 7837

P.W.D. Building 2015 8.13.2 Providing and fixing flush door shutters, conforming to IS 2202 (Part 1), interior grade, commercial type, core of block board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains, cross bands and face veneers on both faces of shutters excluding hinges. 8.13.2 35 mm. thick (single leaf) sqm 1370 14.52 19892

P.W.D. Building 2015 8.13.5 8.13.5 25 mm. thick (double leaf for cupboard shutters with piano type hinges sqm 1092 2.83 3090

P.W.D. Building 2015 9.47.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: 24.50 9.47.1 For fixed portion kg 331 389.72 128997

P.W.D. Building 2015 9.47.2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/neoprene gasket required (Fittings shall be paid for separately). Kg 338 506.27 171119

P.W.D. Building 2015 12.37.3 Chequerred precast cement concrete tiles 22mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tile including cleaning of joint etc complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : 12.37.3 Dark shade using ordinary cement sqm 518 6.06 3139

P.W.D. Building 2015 12.38.5 15mm thick Marble stone slab flooring over 18mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including grinding rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above) 12.38.5 Udaipur green marble sqm 1497 2.93 4386

P.W.D. Building 2015 12.39.5 15mm thick Marble stone slab in, tread & risers of steps, skirting, dado, walls and pillars on 12mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) and jointed with grey cement slurry including matching pigment, rubbing and polishing etc. complete. (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 M). 12.39.5 Udaipur green marble sqm 1576 0.96 1513

P.W.D. Building 2015 8.126.2 Providing and fixing powder coated aluminium sliding door bolts with 16mm rod, necessary M.S. nuts bolts and screws etc complete. 8.126.2 250x16mm each 150 11 1650

P.W.D. Building 2015 8.127.2 Providing and fixing powder coated aluminium door latch with 12mm rod, necessary M.S. nuts bolts and screws etc complete. 8.127.2 250x12mm Each 54.5 9 491

P.W.D. Building 2015 8.128.2 Providing and fixing powder coated aluminium tower bolts (Barrel type) with necessary M.S. screws etc complete. 8.128.2 200 x10mm Each 60 10 600

P.W.D. Building 2015 8.129.1 Providing and fixing powder coated aluminium door handles 2.5mm thick with necessary M.S. screws etc complete. 8.129.1 150 mm Each 32 20 640

P.W.D. Building 2015 8.130.2 Providing and fixing hanging powder coated aluminium door stopper with necessary M.S. screws etc complete. 8.130.2 Double Each 38.5 8 308

P.W.D. Building 2015 13.24 + 13.25 13.24 Providing and fixing one side polished 25 mm thick RAJIM SAND STONE shelves fixed in walls in cement mortar 1:3 (1 cement : 3 coarse sand) including finishing complete. 13.25 Both side polished sqm 414 15.68 6492

P.W.D. Building 2015 9.37 Providing and fixing M.S. fan clamp/hook for ceiling fan made out of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop. each 97 8 776

P.W.D. Building 2015 8.1.2 Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position. 8.1.2 Sal, bijasal, benteak, khair, haldu cum 61051 0.05 3053

P.W.D. Building 2015 9.51.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): 9.51.2 With float glass panes of 5 mm thickness sqm 708 117.3 83048

P.W.D. Building 2015 18.1.3 Providing and fixing water closet squatting pan (Indian type W.C. pan ), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required : 18.1.3 White Orissa pattern W.C. pan of size 580x440 mm each 2899 4 11596

P.W.D. Building 2015 18.17.2 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : 18.17.2 White Size 550x400 mm each 1408 4 5632

P.W.D. Building 2015 18.22.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : 18.22.1 345x445 mm bowl depth 200 mm. each 6298 2 12596

P.W.D. Building 2015 19.7.1 Providing and fixing on wall surface G.I. pipes medium class complete with G.I. fittings and clamps, including cutting, making good the walls etc. and testing of joints complete: 19.7.1 15 mm dia. nominal bore metre 149 60 8940

P.W.D. Building 2015 19.7.3 19.7.3 25 mm dia. nominal bore metre 258 45 11610

P.W.D. Building 2015 19.9.1 Providing and laying in trenches G.I. pipes medium class complete with G.I. fittings including excavation of trenches, refilling the same and testing of joints complete: 19.9.1 15 mm dia. nominal bore metre 131 45 5895

P.W.D. Building 2015 19.9.3 19.9.3 25 mm dia. nominal bore metre 222 40 8880

P.W.D. Building 2015 19.10.1 Making connection of G.I. distribution branch in G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: (dia of main line to be measured) 19.10.1 25 mm nominal bore each 200 18 3600

P.W.D. Building 2015 19.15 Providing and fixing stainless steel drain jali of approved make/quality. each 51 59 3009

P.W.D. Building 2015 19.16.1 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 19.16.1 25 mm nominal bore each 436 4 1744

P.W.D. Building 2015 19.16.3 19.16.3 40 mm nominal bore each 596 4 2384

P.W.D. Building 2015 19.43 Cutting holes more than 20x20 cm and upto 30x30 cm in walls including making good the same : each 125 8 1000

P.W.D. Building 2015 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Liter 7.3 8000 58400

P.W.D. Building 2015 19.48 Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : each 4644 8 37152

P.W.D. Building 2015 19.49 Constructing masonry Chamber 90x90x100 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : each 8013 4 32052

P.W.D. Building 2015 20.1.1 Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 20.1.1 100 mm diameter Mtr. 162 40 6480

P.W.D. Building 2015 20.1.2 150 mm diameter Mtr. 262 80 20960

P.W.D. Building 2015 20.2.1 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete 150mm thick as per standard design: 20.2.1 100 mm diameter S.W. pipe metre 357 40 14280

P.W.D. Building 2015 20.2.2 150 mm diameter S.W. pipe Mtr. 436 80 34880

P.W.D. Building 2015 19.13.2 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: 19.13.2 Bib cock (350 grams) each 237 6 1422

P.W.D. Building 2015 19.13.3 Stop cock (350 grams) each 237 8 1896

P.W.D. Building 2015 18.76.1 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 18.76.1 75 mm dia pipe. Mtr. 182 365.6 66539

P.W.D. Building 2015 18.76.2 110 mm dia pipe. Mtr. 267 210 56070

P.W.D. Building 2015 18.77.1.1 18.77 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 18.77.1.1 Tee/ Tee with door/ Bend 45°/ Bend 90° 75 mm each 113 100 11300

P.W.D. Building 2015 18.77.1.2 110 mm each 154 140 21560

P.W.D. Building 2015 18.77.2.2 Double "Y" with or without door 110 mm each 224 50 11200

P.W.D. Building 2015 18.77.3.2 Vent covel 110 mm each 44 14 616

P.W.D. Building 2015 18.77.5 "P" trap 110mmx110mm long each 227 14 3178

P.W.D. Building 2015 18.77.6 Nahani trap 110x75mm each 90.5 40 3620

P.W.D. Building 2015 20.31 Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. each 1709 6 10254

P.W.D. Building 2015 19.14.1 19.14 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: 19.14.1 Bib cock (400 grams) each 382 34 12988

P.W.D. Building 2015 19.14.3 Long body bib cock (500 grams) each 426 2 852

P.W.D. Building 2015 19.14.5 Two way bib cock (800 grams) each 708 2 1416

P.W.D. Building 2015 19.14.6 Stop cock (concealed) (600 grams) each 494 54 26676

P.W.D. Building 2015 19.14.7 Angle valve for basin mixer and geyser points (450 grams) each 382 22 8404

P.W.D. Building 2015 19.14.14 Soap dish plate each 163 20 3260

P.W.D. Building 2015 19.14.15 Shower rose (revolving type) (150mm) each 269 16 4304

P.W.D. Building 2015 19.14.16 Towel rail (600mm long x 20mm dia) each 338 18 6084

P.W.D. Building 2015 19.14.19 Health foscet (hand jet) with flexible connection pipe (for WC) set 774 2 1548

P.W.D. Building 2015 11.5 Neat Cement punning. Sqm 33 35.04 1156

P.W.D. Building 2015 11.9 Extra for providing and mixing water proofing materials in cement plaster work in proportion as recommended by manufacturer Kg 43.5 8.64 376

P.W.D. Building 2015 20.14.1 Supplying and fixing C.I. cover without frame for manholes : 20.14.1 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. each 1222 1 1222

P.W.D. Building 2015 20.7.1 20.7 Constructing brick masonry manhole with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 ( 1 cement : 4 coarse sand), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation in cement concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : 20.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : each 6703 8 53624

P.W.D. Building 2015 20.11.1 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design: 20.11.1 With 20x20 mm square bar each 168 5 840

P.W.D. Building 2015 14.5.1 White washing with lime to give an even shade. 14.5.1 On new work (Three or more coats) sqm 14 24.39 341

P.W.D. Building 2015 12.3.1 12.3 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement 12.3.1 40 mm thick Sqm 222 24.39 5415

P.W.D. Building 2015 14.62 amm Providing and applying Distemper or lite economy Plastic emulsion paint having VOC content less than 5Ogms/ lit Minimum two coats up to ftnal finish applied 1 .25 Kg/ 10Sqm as per relevant I S. Code 428-2000 (product such as Tractor Uno, Dulux Duval, Berger Bison, Opus Style/lite economy emulsion product such as Asian Tact or Spark ,Dulux Pomi se sheen, Neroloc Litil Master, Berger Bison Lite, Nippon Superio.) inclusive of providing abro tape on edges and article and cleaning of door, windows, n«r and surface as required with all tools tackles and labour complete for the xvork. Sqm 64 547.107 35015

P.W.D. Building 2015 14.58 amm 14.58 providing and applying water proofing cement paint mimimum 2 coats applied @ 3.84 kg/10 sqm up to required finish as per relevant I.S. cade 5410.2013 of requred shade (product such as snowcem plus j.k. shri cement paints , century cement paints, apex paints, maxcoat cement paint ) with all tool tackles and labour etc. complete for the work. Sqm 53 1172.765 62157

P.W.D. Building 2015 9.6.2 9.6 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer 9.6.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Kg 68 1361.4 92575

P.W.D. Building 2015 21.1.1.3 Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge upto 90 metre depth below ground level 21.1.1 All types of soil 21.1.1.3 150 mm dia. Metre 339 100 33900

P.W.D. Building 2015 21.1.2.3 21.1.2 Rocky strata including Boulder 21.1.2.3 150mm dia 396 80 31680

P.W.D. Building 2015 21.18 Providing and fixing filter of minimum 100 litre capacity for roof top rain water harvesting through tube well consisting of two layered HDPE tank with five layers (each layers of minimum 100 mm) consist of coarse sand, 4mm, 6mm, 8mm & 12 mm gravels with stainless steel wire mesh fixed between each layer with suitable length and sufficient numbers of 110 mm dia PVC pipe pieces in the bottom of tank to support the above layer including fixing of inlet and out let P.V.C. pipe of required diameter upto 2 metre length on each side, Cement Concrete plateform of required size complete as directed by Engineer in charge. (excluding cost of tubewell and inlet and outlet pipe beyond 2 metre) Metre 18.5 1000 18500

P.W.D. Building 2015 21.2.2.3 Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge beyond 90 metre & upto 150 metre depth below ground level. 21.2.2 Rocky strata including Boulders. 21.2.2.3 150 mm dia. metre 424 116 49184

P.W.D. Building 2015 21.5.3 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer –in-charge. 21.3.3 150 mm nominal size dia. metre 1304 100 130400

P.W.D. Building 2015 21.9 Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. cum 1048 2.4 2515

P.W.D. Building 2015 21.17 Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot for drilling of tube well within the selected habitation, including photography, interpretation of resistivity data and submission of report in the desired format along with resistivity readings, necessary graph and photographs. (only successful point is payable) point 1502 2 3004

P.W.D. Building 2015 18.1.1 18.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required : 18.1.1 White Long pattern W.C. pan of size 580 mm Each 2459 12 29508

P.W.D. Building 2015 18.4.1 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : 18.4.1 White pedestal type each 2882 2 5764

P.W.D. Building 2015 18.9.1 Providing and fixing ISI marked plastic seat with lid for pedestal type W.C. pan complete: 18.9.1 White/ black each 620 2 1240

P.W.D. Building 2015 18.17.1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : 18.17.1 White Size 550x450 mm each 1430 14 20020

P.W.D. Building 2015 18.21.2 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink with drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : 18.21.2 1040x510 mm bowl size 460x410x200 mm each 8539 3 25617

P.W.D. Building 2015 18.25.2 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 18.25.2 40 mm dia each 88.5 3 266

P.W.D. Building 2015 18.29 Providing and fixing 600x450 mm beveled edge 4mm mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. each 599 14 8386

P.W.D. Building 2015 18.78.2 18.78Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 18.78.2 110 mm each 61 50 3050

P.W.D. Building 2015 18.78.1 75 mm each 57 30 1710

P.W.D. Building 2015 19.5.1 19.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. CONCEALED WORK including cutting chases and making good the walls etc., 19.5.1 15 mm nominal outer dia .Pipes. Mtr. 133 50 6650

P.W.D. Building 2015 19.5.2 20 mm nominal outer dia .Pipes. Mtr. 167 40 6680

P.W.D. Building 2015 19.5.3 25 mm nominal outer dia .Pipes. Mtr. 213 110 23430

P.W.D. Building 2015 19.5.4 32 mm nominal outer dia .Pipes. Mtr. 284 40 11360

P.W.D. Building 2015 19.18.1 19.18 Providing and fixing gun metal non- return valve (horizontal type) of approved quality (screwed end) : 19.18.1 25 mm nominal bore each 688 12 8256

P.W.D. Building 2015 19.18.4 50 mm nominal bore each 993 6 5958

P.W.D. Building 2015 19.47 Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : each 754 8 6032

P.W.D. Building 2015 20.3.1 20.3 Providing and fixing square-mouth S.W. gully trap grade 'A'’ complete with C.I. grating brick masonry chamber with well burnt modular clay bricks crushing strength not less than 35kg/cm2, water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 20.3.1 100x100 mm size P type each 1339 10 13390

P.W.D. Building 2015 3.2 Excavation in Soil (by Mechanical Means.) Excavation for roadway in soil using mechanical means including loading in tipper for carrying of cut earth to embankment site and unloading with all lifts and lead upto 1000 meters as per relevant clauses of section 300. cum 95 800 76000

P.W.D. Road 2015 4.1 Granular Sub-base as per Table:- 400-1 Construction of granular sub-base by providing graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401 B) for lower sub base with (i) Grading-V material cum 1372 1110 1522920

P.W.D. Road 2015 6.6(1) Providing and laying cement concrete for plain concrete /reinforced concrete i/c form work ,shuttering complete in as per drawing and specification for village roads (i) P.C.C M-10 cum 2789 336 937104

P.W.D. Road 2015 6.7 Providing and laying Un-reinforced cement concrete withot dowel bars including formwork and expansion , contraction & longitudinal joints as per design and as per IRC:62 over a prepared -base, as per approved mix design and finishing to lines and grade as per drawing for pavement thickness less than 200mm in low volume road (ii) With Cement concrete grade M-30 and minimum cement content @ 375 kg/cum. cum 4391 600 2634600

P.W.D. Road 2015 3.12 Construction of embankment with Material Obtained from Borrow Pits/Borrow Area (Construction of embankment with approved material/selected soil having C.B.R.>5 (unless specified otherwise in the contract) obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2) cum 223 2117.4 472180

P.W.D. Road 2015 4.13 Construction of Shoulders (Construction of shoulders as per clause 408 with selected soil from borrow pits / borrow areas having CBR not less than 12 and shall have L.L. and P.I. not more than 25% and 6% espectively, inclusive of all leads and lifts, including clearing and scrapping of existing surface, providing required cross fall, compacting. watering rolling and royalty charges etc. complete. B) With smooth wheeled roller cum 277 486 134622

P.W.D. Road 2015 R-SOR It No. 9.1 P. No. 39 Excavation for Structures Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfdling with approved material as per Clause 304, loading the unserviceable material in tipper and unloading with all leads & lifts as directed by Engineer-in-Charge. I) Ordinary soil (ii) up to 3.0m depth cum 146 3.41 498

P.W.D. Road 2015 R-SOR It - 9.4 P. No. 39 Providing and laying Reinforced Cement Concrete pipe NP 3 / prestressed concrete pipe on first class bedding Laying einforced cement concrete pipe NP3 /prestressed concrete pipe complying to IS:458, with ends casted as per the requirements of flush jointing of pipes for culverts on first class bedding of granular material including joints duely filled and finished with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets. (A) 600 mm dia Metre 1893 40 75720

P.W.D. Road 2015 R-SOR It No. 3.20 (ii) P. No. 13 Construction of RCC open drain 0.60m or 0.45 M (inside dimension) and average depth from inlet to outlet 0.60 m. or 0.45 m. (maintaining slop as per site condition) with 120 mm thick RCC M-25 walls, 120 mm thick RCC M-25 bottom slab, over 100 mm thick (Av) leveling course in PCC M-15 including excavation , dressing of sides and bottom, provision of HYSD reinforcement consisting 8 mm dia horizontal bars @ 150 mm c/c and U-shaped 8 mm dia bars @ 150 mm c/c including cutting , bending and binding wire, placing in position , providing shuttering and concreting by using concrete mixer, compaction by vibration etc complete as per drawings and technical specifications. m 2592 78 202176

P.W.D. Building 2015 7.11.2 + 7.12 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level upto plinth level: 7.11.2 Cement Mortar 1:4 (1 cement : 4 coarse sand) 7.12 Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level: sqm 393 101.76 39992

P.W.D. Building 2015 14.56 Providing and applying 2mm thick white cement based polymeric Exterior grade Putty with minimum 3 coats applied @ 5.4 kg/ 10Sqm as per relevant IS code 17545:2021 (Product such as Birla wall care, Asian trucare, JK wall putty, Berger Bison wall putty) to make the surface smooth and even with all tools tackles and labour etc. complete for the work. Sqm 86 442.76 38077

1 PWD ELECT 2020 1.7 Wiring for light/ fan/ exhaust fan / call bell point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) (1.7.1) Short Point Point 266 62

2 PWD ELECT 2020 1.7.2 Medium Point Point 424 95

3 PWD ELECT 2020 1.7.3 Long Point Point 588 193

4 PWD ELECT 2020 1.8 Wiring for twin control light point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Point 420 2

5 PWD ELECT 2020 1.9 Extra for providing and fixing light plug point on board in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) point wiring with modular type 3 pin 5/6 amp socket outlet and 5/6 amp switch including cost of base and cover plate and G. I. box etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Point 216 118

6 PWD ELECT 2020 1.10 Wiring for light plug point with 3x2.5 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 6 Amp switch and 3 pin 6 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) (1.10.3) Long Point Point 922 15

7 PWD ELECT 2020 1.10.4 Extra Long Point I Point 1302 12

8 PWD ELECT 2020 1.10.5 Extra Long Point II Point 1657 9

9 PWD ELECT 2020 1.10.6 Extra Long Point III Point 1995 10

10 PWD ELECT 2020 1.11 Wiring for power plug point with 3x4 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 16 Amp switch and 6 pin 16 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) (1.11.3) Long Point Point 1350 3

11 PWD ELECT 2020 1.11.4 Extra Long Point I Point 1807 4

12 PWD ELECT 2020 1.11.5 Extra Long Point II Point 2315 4

13 PWD ELECT 2020 1.11.6 Extra Long Point III Point 2825 2

14 PWD ELECT 2020 1.12 Wiring for power plug point with 3x6 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 32 Amp SPMCB "C" curve and 6 pin 20 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) (1.12.3) Long Point Point 1705 1

15 PWD ELECT 2020 1.12.4 Extra Long Point I Point 2326 1

16 PWD ELECT 2020 1.12.5 Extra Long Point II Point 3016 1

17 PWD ELECT 2020 1.12.6 Extra Long Point III Point 3708 1

18 PWD ELECT 2020 1.13 Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, wire in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) (1.13.1) 3 X 1.5 sq. mm in 20mm conduit Metre 92 400

19 PWD ELECT 2020 1.13.2 3 X 2.5 sq. mm in 20mm conduit Metre 111 509

20 PWD ELECT 2020 1.13.3 6 X 2.5 sq. mm in 25mm conduit Metre 172 275

21 PWD ELECT 2020 1.13.4 9 X 2.5 sq. mm in 32mm conduit Metre 238 167

22 PWD ELECT 2020 1.13.5 12 X 2.5 sq. mm in 32mm conduit Metre 288 85

23 PWD ELECT 2020 1.13.6 3 X 4 sq. mm in 25mm conduit Metre 145 625

24 PWD ELECT 2020 1.13.7 3 X 6 sq. mm in 25mm conduit Metre 182 35

25 PWD ELECT 2020 1.13.13 6 X 6 sq. mm in 32mm conduit Metre 312 55

26 PWD ELECT 2020 1.13.14 6 X 10 sq. mm in 40mm conduit Metre 515 354

27 PWD ELECT 2020 3.11 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, multi strand wire in the existing surface/ concealed, FRLS PVC conduit / PVC casing caping as per specification and IS: 694 (2010) (3.11.12) 2 x 2.5 sq. mm Metre 39 120

28 PWD ELECT 2020 3.14 Supplying and drawing UTP 4 pair Cat 6 LAN wire in existing surface/ concealed Steel/FRLS PVC conduit as per specification Metre 19 850

29 PWD ELECT 2020 1.15 Supplying and fixing of following sizes FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with accessories in concealed complete as per specification and IS: 9537 (2000 Part 5) (1.15.2) 25 mm Metre 53 560

30 PWD ELECT 2020 5.4 Supplying and fixing following modular switch, socket, other accessories on the existing modular plate & switch box including connections but excluding modular plate etc. as per specification. (5.4.8) Fan regulator (one module size) electronic stepped type moving all rounds Each 186 78

31 PWD ELECT 2020 5.4.9 Fan regulator (two module size) electronic stepped type moving all rounds Each 223 7

32 PWD ELECT 2020 5.4.14 RJ-45 {CAT6} LAN, I/O Box Each 0.0 20

33 PWD ELECT 2020 5.4.22 Batten/ angle holder Each 41 78

34 PWD ELECT 2020 5.4.18 25/32 amp A.C. Starter switch Each 246 4

35 PWD ELECT 2020 5.4.23 Blanking plate Each 28 122

36 PWD ELECT 2020 5.6 Providing and fixing composite unit for computer points having modular type 1 No 6 pin 16 amp socket outlet, 1 No 16 amp switch, 3 Nos 3 pin 6 amp socket outlets, 3 Nos 6 amp switches, suitable G.I. box, base and cover plates, earthing the sockets and switch box including etc. as per specification. Each 816 40

37 PWD ELECT 2020 5.7 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts A.C. supply, complete as per specification. (5.7.2) Deluxe Each 107 4

38 PWD ELECT 2020 5.9 Providing and fixing round/ hexagonal fan box (125mm dia) depth 75mm (max.) with 12mm dia steel bar hook, 1.6mm thick MS sheet cover, in RCC slab etc. as per specification. Each 42 85

39 PWD ELECT 2020 6.1 Supplying, installation, testing and commissioning of following sizes ceiling fan including wiring the down rods of standard length up to 30 cm with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, earthing etc. complete as required. P.F. should be greater than 0.9, with BEE Star rating from 3 star and above, IS: 374:2019 including all amendments. (6.1.3) 1200 mm sweep Each 1697 81

40 PWD ELECT 2020 6.1.4 1400 mm sweep Each 1773 4

41 PWD ELECT 2020 6.6 Supplying, installation, testing and commissioning of following sizes heavy duty (continuous running) 1400 rpm exhaust fan in existing opening in wall including earthing etc. complete as per specification. P.F. should be greater than 0.9 (6.6.1) 300 mm sweep Each 2446 14

42 PWD ELECT 2020 6.6.2 380 mm sweep Each 2858 4

43 PWD ELECT 2020 6.11 Supplying and fixing following sizes of down rod of 15/20mm dia M.S. pipe of thickness 2 mm to ceiling fan including painting with matching colour etc. as per specification. (6.11.2) 60 cm long Each 40 75

44 PWD ELECT 2020 6.11.1 45 cm long Each 31 10

45 PWD ELECT 2020 6.12 Providing and fixing phenolic laminated sheet cover of 180 mm dia 3 mm thick on the fan box etc. as per specification. (If provided at the time of installation of ceiling fan) Each 56 85

46 PWD ELECT 2020 6.19 Supplying, installation, testing and commissioning of following LED tube light fitting including batten with Electronic Driver Heat sink Capacitor complete with all other accessories on surface/ in false ceiling, including connection, earthing etc complete as per specification and IP20, P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. (6.19.3) 18/20 watt {4 feet} Each 443 82

47 PWD ELECT 2020 6.16 Supplying, installation, testing and commissioning of following sleek LED panel down lighters (luminaries) in round/ square shape complete with electronic driver heat sink capacitor and all other accessories on surface/ in false ceiling etc. as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. (6.16.1) 24 watt, size 300 x 300mm Each 1775 3

48 PWD ELECT 2020 6.17 Supplying, fixing, testing and commissioning of following LED lamps with inbuilt electronic driver heat sink and all other accessories in existing holder/ luminaries as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. (6.17.5) 12 Watt Each 215 63

49 PWD ELECT 2020 6.17.6 15 Watt Each 249 11

50 PWD ELECT 2020 6.21 Supplying, installation, testing and commissioning of following LED tube light fitting {Inverter Type: with builtin battery backup} including batten with Electronic Driver Heat sink Capacitor complete with all other accessories on surface/ in false ceiling, including connection, earthing etc complete as per specification. IP20, P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. (6.21.1) 20 watt Each 997 56

51 PWD ELECT 2020 6.27 Supplying, installation, testing and commissioning of following LED Bulk Head fitting complete with Electronic Driver Heat sink Capacitor and all other accessories, including connection, earthing etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. IP65 (6.27.1) 10 watt Each 1140 1

52 PWD ELECT 2020 6.28 Supplying, installation, testing and commissioning of following 230/250 volts LED street light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Separate housing for driver etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt. (6.28.7) 60 watt Each 3622 21

53 PWD ELECT 2020 6.28.6 45 watt Each 2729 3

54 PWD ELECT 2020 6.50 Providing and fixing wooden board of suitable size (18''x 24'') for energy meter etc complete as per specification. Each 123 2

55 PWD ELECT 2020 7.9 Providing and fixing metal clad, SP&N switch fuse unit (re-wirable), 230/250 volts, with porcelain re-wireble fuses including drilling holes on the board, connections, earthing the body etc. as per specification. (Thimbeling shall be paid separately). (7.9.1) 32 amps Each 978 2

56 PWD ELECT 2020 7.8 Supplying and fixing metal clad busbar chamber made of 2.0 mm thick CRCA MS powder coated sheet with 4 strip copper busbars of following capacity and length, complete with all accessories, including earthing the body etc. as per specification. (7.8.1) 100 amps x 300mm long Each 1729 1

57 PWD ELECT 2020 7.10 Providing and fixing metal clad, TP&N switch fuse unit (re-wirable), 415/500 volts, with porcelain re-wireble fuses including drilling holes on the board, connections, earthing the body etc. as per specification. (Thimbeling shall be paid separately). (7.10.3) 100 amps Each 3493 1

58 PWD ELECT 2020 7.17 Providing and making interconnection in cubical panel between BBC and switchgears with following size FRLS PVC insulated copper conductor wire lead of length upto 50cm including providing copper thimbles on both ends as per specification (To be measured separately for each phase/ neutral). (7.17.1) 10 sqmm (32 amp) Each 76 24

59 PWD ELECT 2020 7.19 Fabrication, supply, installation, testing and commissioning of cubicle type compartmentalized wall/ floor mounted power cum control panel board of specified size and following depth made out of not less than 2 mm thick CRCA MS powder coated sheet with suitable size compartments for bus bars, switchgears and necessary cutouts for voltmeters, ammeters etc as per specifications including powder coating painting but without busbars, switchgears and other accessories etc complete as per specification. (7.19.1) Upto 300 mm deep sqm 6818 2.25

60 PWD ELECT 2020 7.20 Supply, installation, testing and commissioning of 4 pole (3 phase + neutral) aluminium bus bars in existing cubicle type compartmentalized wall/ floor mounted panel board along with suitable size and shape insulators, necessary bolts and nuts etc complete as per specification. (7.20.2) 200 amp (30x5mm) Metre 907 1.4

61 PWD ELECT 2020 9.1 Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as per specification, IS/ IEC: 60947-2 and Ics = 100 % Icu. (9.1.1) 3 pole MCCB, 25-63A, Fixed Thermal Release, 10KA Each 1483 8

62 PWD ELECT 2020 9.1.6 3 pole MCCB, 160A, Adjustable Thermal - Magnetic Release, 25KA Each 7623 1

63 PWD ELECT 2020 9.7 Supplying and fixing on surface/ recess prewired following way, 240 volts SP&N, MCB distribution board of sheet steel phosphatized and powder painted complete with loose wire box, terminal blocks, tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate, duly prewired with suitable size FRLS PVC insulated copper conductor up to terminal blocks including interconnections, earthing etc. as per specification. (But without MCB/ RCCB/ Isolator) (9.7.6) 2 + 12 way, Double door Each 2895 1

64 PWD ELECT 2020 9.3 Supplying and fixing on surface/ recess following way, 240 volts SP&N MCB distribution board consumer unit of sheet steel phosphatized and powder painted, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, including interconnections, earthing etc. as per specification. (But without MCB/RCCB/Isolator) (9.3.2) 2 + 8 way Each 785 1

65 PWD ELECT 2020 9.4 Supplying and fixing on surface/ recess horizontal type following way, 415 volts, TPN MCB distribution board of sheet steel phosphatized and powder painted, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, including interconnections, earthing etc. as per specification. (But without MCB/RCCB/Isolator) (9.4.4) 4 way Double door Each 1716 2

66 PWD ELECT 2020 9.4.2 6 way Single door Each 1599 1

67 PWD ELECT 2020 9.4.5 6 way Double door Each 2038 2

68 PWD ELECT 2020 9.4.6 8 way Double door Each 2547 3

69 PWD ELECT 2020 9.10 Supplying and fixing SP MCB, 240 volts, 'B' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. (9.10.1) 6 amps to 32 amps Each 151 146

70 PWD ELECT 2020 9.11 Supplying and fixing SP MCB, 240 volts, 'C' curve, suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. (9.11.2) 6 amps to 32 amps Each 148 4

71 PWD ELECT 2020 9.12 Supplying and fixing DP MCB, 240 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. (9.12.3) 40 amps Each 645 2

72 PWD ELECT 2020 9.14 Supplying and fixing TP MCB, 440 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. (9.14.5) 63 amps Each 996 8

73 PWD ELECT 2020 9.16 Supplying and fixing TP&N MCB, 440 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. (9.16.3) 40 amps Each 1275 2

74 PWD ELECT 2020 10.15 Providing and fixing following rating current transformer in existing cubical panel including, connections, testing and commissioning etc. as per specification. (10.15.3) 200/5 amps Each 347 3

75 PWD ELECT 2020 10.17 Providing and fixing penal mounting 230 volt LED type indicating lamp in existing cubical panel including, connections, testing and commissioning etc. as per specification. Each 94 6

76 PWD ELECT 2020 10.23 Providing and fixing panel mounting digital type VAF (Volt-amp-frequency combined) Multi Function meter of size 100x100 (NS) in existing cubical panel including connection, testing and commissioning etc. as per specification. Each 1201 1

77 PWD ELECT 2020 11.1 Supplying, installation, testing and commissioning following rating single phase, 230 volts OFF-LINE UPS (sine wave) with built-in battery including connection as per specification. (11.1.2) 1.00 KVA Each 4333 2

78 PWD ELECT 2020 11.1.3 1.50 KVA Each 8379 1

79 PWD ELECT 2020 12.3 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe, with charcoal and salt as per specification and IS Code 3043: 1987(R 2016) Set 6209 2

80 PWD ELECT 2020 12.4 Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as per specification. Metre 77 24

81 PWD ELECT 2020 12.19 Providing maintenance free earthing with following size GI pipe including making bore pit of minimum 150mm dia, providing and laying approved make Earthing Electrode of Pipe-in-Pipe technology as per IS 3043(R 2016) -1987 made of corrosion free G.I. Pipes having outer pipe of 80mm dia and inner pipe of 50mm dia and filling with specified qty highly conductive compound around pipe and above that with soft soil in bore pit complete and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. as per specification: (12.19.2) With 2 metre long GI Pipes and 25 kg back filling compound. Each 8222 2

82 PWD ELECT 2020 12.6 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode at 0.5 Metre depth below ground level including excavation and refilling the trench etc. as per specification. Metre 752 10

83 PWD ELECT 2020 12.11 Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as per specification. Metre 947 1

84 PWD ELECT 2020 14.2 Supplying and laying HDPE pipe of 4kg/Sqcm in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification. (14.2.2) 75 mm outer dia Metre 174 110

85 PWD ELECT 2020 14.3 Supplying and laying following size medium class G.I. pipe in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification. (14.3.2) 80 mm internal dia Metre 527 35

86 PWD ELECT 2020 15.3 Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade in existing RCC/ HUME/ STONEWARE/ METAL/ HDPE pipe as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1). (15.3.12) 3.5 x 35 sq. mm. Metre 134 110

87 PWD ELECT 2020 15.11 Supplying and hanging following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade on GI bearer wire (binded at every metre) including cost of bearer wire complete as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1). (15.11.3) 2 x 10 sq. mm. on 8 SWG GI bearer wire Metre 103 95

88 PWD ELECT 2020 15.11.19 4 x 16 sq. mm. on 8 SWG GI bearer wire Metre 136 65

89 PWD ELECT 2020 15.11.12 3.5 x 35 sq. mm. on 7 SWG GI bearer wire Metre 185 55

90 PWD ELECT 2020 15.29 Supplying, fixing and cramping suitable size and all type Copper ferule/ lugs to following size 1.1 KV grade power cable core / lead, pressed with high pressure cramping tool including connection to switch gear/ MCCB etc as per specification. . (15.29.2) 10 sq. mm Each 21 36

91 PWD ELECT 2020 15.23 Supplying and making end termination with brass compression gland and aluminum lugs for following size armoured aluminum conductor power cable of 1.1 KV grade as per specification. (15.23.13) 3½ X 35 sq. mm (28 mm) Each 153 8

92 PWD ELECT 2020 24.23 Supplying, installation, testing and commissiong of following size drinking water cooler storage type ISI marked, eco friendly non CFC refrigarant, water tank and cooler cabinet sheet material- stainless steel {grade AISI 304} with thickness>= 0.8 mm, with PUF insulation including all accessories connection etc complete as per specification. (24.23.2) 60/120 Ltrs/hr Each 34581 1

93 PWD ELECT 2020 24.24 Supplying, installation, testing and commissiong of following capacity of RO purification system with UF/UV/TDS controler and UV lamp {IS 14724 Ultra voilet disinfection} and minimum three stage purification, automatic on/off, output water conferming standard IS 10500 with inbuild storage tank including all accessories connection etc complete as per specification. (24.24.2) 50 Ltrs/hr output capacity Each 39021 1

94 PWD ELECT 2020 30.1 Earth work in all type soil except soft rock / hard rock with all lead and 1.5 metre lift, dressing, stacking excavated strata including refilling of excavated soil in trench / pit to ground level complete as per specification. cum 168 4.6

95 PWD ELECT 2020 23.3 Supplying, installation, testing and commissioning of submersible pump set for water supply system with submersible motor directly coupled to multi-stage submersible pump of specified discharge capacity, head, delivery size in existing bore well including 2 sets of suitable size holding clamps made out of 50 mm X 6 mm MS flat, connection with suitable submersible cable of standard length etc. as per specification and IS: 694 (2010). Note: submersible Cable should be rust proof, safe from oil / Grease and under water Chemical / abrasion Resistant. (23.3.2) 1.5 HP, single phase Each 17589 1

96 PWD ELECT 2020 23.6 Supplying and fixing following dia HDPE pipe PE-80 Grade (8kg/sqcm) in single length in the suction/ delivery line of water supply pump etc. as per specification. (23.6.1) 32 mm outer dia Metre 55 120

97 PWD ELECT 2020 23.11 Supply, installation, testing and commissioning of 1-3 HP 1 phase submersible motor starter cum control wall/ floor mounted type made out of not less than 1.6 mm thick MS sheet and comprising of following panel mounting switchgears there in including connection inter-connection etc. as per specification. a) Phase indicating lamps with fuses and toggle switches 1 set b) 1/2/3 HP 1 phase DOL starter with over load and no volt relay 1 No c) 25 A "C" curve DPMCB 1 No d) Voltmeter 0-250 V 1 set e) Ammeter 0-10 A 1 set Each 4030 1

98 PWD ELECT 2020 23.12 Supplying and fixing M.S. clamp 50 cm long made of 50mmx5mm thick M.S. Flat for holding the pipes and submerable pump set as per specification. Metre 291 2

99 PWD ELECT 2020 23.13 Supplying and fixing 300 mm dia 2 mm thick M.S. sheet cover with 3 cm edge in two past on tube well bore pipe as per specification Each 388 2

100 PWD ELECT 2020 23.14 Supplying, laying and fixing following size submersible cable along with GI/PVC/HDFC pipe line or laid in ground etc as per specification and IS: 694 (2010). Note: Cable should be rust proof, safe from oil / Grease and under water Chemical / abrasion Resistant. (23.14.3) 3x4.0 sqmm Metre 90 170

101 PWD ELECT 2020 23.15 Supplying and making water proof joint with heat shrinkable joint kit including copper ferrules for following size of 3 core submersible copper conductor cable of 1.1 KV grade as per specification. (23.15.3) 3x4.0 sqmm Each 264 2

102 PWD ELECT 2020 23.16 Supplying and laying of approved make stainless steel wire rope of 6 mm dia for support of submersible pump set complete with tying to pump set and pump holding clamp. Metre 16 120

103 PWD ELECT 2020 27.10 Supplying , installation , testing and commissioning of 2 MP Bullet Camera weather & dust proof IP based Fixed Lens day/night Camera (IP67 , IK 10) , 2 MP CMOS Image Sensor ,H.265 and H.264 triple-stream WDR(120dB), Day/Night, UL ,CE FCC Certified as per the specifications. Each 5094 8

104 PWD ELECT 2020 27.19 Supplying , installation , testing and commissioning of 16 Channel NVR 2 Sata port Up to 16 channel IP camera input , Max 200Mbps incoming bandwidth ,Smart H.265+/H.265/Smart H.264+/H.264 dual codec decoding , Up to 8MP resolution preview and playback , Support 2 SATA HDDs up to 6 TB each, 2 USB(1 USB3.0, 1 USB2.0) , 1 HDMI / 1 VGA simultaneous video output ,ONVIF Version 2.4 conformance , Alarm In / out 4/2 , Two way talk 1 Channel Input, 1 Channel Output RCA , 1 RJ-45 port (10/100/1000Mbps) as per the specifications. Each 12252 1

105 PWD ELECT 2020 27.25 Supplying , installation , testing and commissioning of 4 Port POE Switch 10/100 4 Port PoE with 2 10/100 Mbps Uplink ,Power Budget 60 Watt , Max 30 watt per port as per the specifications. Each 2773 1

106 PWD ELECT 2020 27.27 Supplying , installation , testing and commissioning of 8 Port Giga PoE Switch 10/100/1000 8 Port with 2 GigaJ 45 uplink, PoE switch ,AI Extend , AI Vlan as per the specifications. Each 6711 1

107 PWD ELECT 2020 27.39 Supplying , installation , testing and commissioning of 8 TB Surveillance Hard disk drive Complete as required Each 21655 1

108 PWD ELECT 2020 27.44 Supplying , installation , testing and commissioning of 4U Indoor Rack Wallmount 4U 400D With Front Glass Door Lock & Key 550 4U - (fan; cable manager; PDU) complete as required. Each 3132 1

109 PWD ELECT 2020 27.45 Supplying , installation , testing and commissioning of 6U Indoor Rack Wallmount 6U 450D With Front Glass Door Lock & Key 550 6U - loaded with cable manager + PDU + Fan complete as required. Each 3507 1

110 PWD ELECT 2020 27.49 Supplying, installation, testing and commissioing of following size LED Monitor, table/wall mount with inbuild speaker minimum 5Wx2,with minimum 1 No of HDMI and USB port including remote control, connecting cable, batteries, and all accessories, connection etc complete as per specification. (27.49.2) 43 inch Each 43178 1

111 PWD ELECT 2020 27.73 Supply, installation and testing for HDMI cable. Metre 462 12

Say Rs. In Lacs 251.81 Lacs

Sub Engineer P.W.D. (B&R) Balod Sub Divisional Officer P.W.D. (B&R)Sub-Division No. 1 Balod Executive Engineer P.W.D. Balod Division Balod

OFFICE OF THE EXECUTIVE ENGINEER E/M DIVISION PWD DURG (C.G.)

TERMS & CONDITIONS

Name of work :- CONSTRUCTION OF 50 BEDED GIRLS HOSTEL BUILDING I/c Water Supply, Sanitary Fittings, Boundry Wall, "F" Type Qtr, Guard Room approach Road & Electrification work at Govt POLYTECHNIC College BALOD (C.G.)

1. Electric installation shall be carried out in accordance with the General specification for Electrical Works (Part - I Internal) & (Part - II External) 1972 of C.P.W.D. adopted by E-In-C M.P.W.D. Bhopal & also : Confider with Indian Electrical Rule 1956 as amended. up to Date .

2. Civil contractor should sublet the Electrical Work to only those Electrical contractor who are Registered in PWD for Electrical Work as following class

(I) "D" Class Electrical Contractor - Up to 1.00 Crore

(II) "C" Class Electrical Contractor - Up to 2.00 Crore

(III) "B" Class Electrical Contractor - Up to 10.00 Crore

(IV) "A" Class Electrical Contractor - Unlimited

3. Contractor will submit along with final bill.

(a) Completion Certificate

(b) Completion Plan drawn to a suitable scale on tracing cloth with ink. Indicating Location of main switch, D.B. Circuit fitting and their Location

4. The Contractor will be fully responsible for any accident damages and losses occurred due to negligence of Work. The amount of the losses and damages etc. will be recovered from the Contractor.

5. The Contractor shall have his own tools and plants. Helmet, hand gloves, firs aid box and other safety measures. In good working condition for staff. No Extra payment shall be made for this arrangement and no Claims shall be paid by the department.

6. The Contractor himself shall be fully responsibility for any accident casualty of the staff if occurs due to Electrical fault of any other reason during the work and no claim will be paid for such accident of causality by the

7. The Contractor will be fully responsibility for taking all of safety measures during ontract period.

(a) Electrical power supply arrangement temporarily at site will be made by contractor No payment will be made by PWD Department.

(b) Earthing system should be installed in presence of A.E. (E &M)/Sub Engineer PWD (E.& M)

8. Earth continuity conductor of required size & material should be installed with entire run of wiring. Earth nut bolt must be provided at all switch boards All metallic parts Ceiling fan tube fitting socket out let should be essentially connected to earth.

9. All connection of ceiling fan tube fixture street light fixture shall be made by 3 core PVC/ Rubber sheathed cable of required.

10. The Civil contractor should a Electrical Supervisor for Electrical works at site as per Norms of C.G. / M.P Govt. who Electrical Diploma / Degree Holder as Required as per PAC Amount.

NAME OF WORK :- Construction Of 50 Seater Girls Hostel Building I/C Water Supply, Sanitary Fittings, Boundary Wall, "F" Type Qtr, Guard Room Approach Road & Electrification Work At Govt. Polytechnic College Balod Distt- Balod (C.G.)

LIST OF APPROVED MATERIALS FOR ELECTRIFICATION WORK

S.No. Name of Item Make Remark

1 Switches/Sockets (Modular) 1. M.K.(Elements) 2. Hevell's 3. Legrand 4.Schneider 5. Anchor

2 PVC Wires (Fire Ratardant) 1. RR cable 2. Polycab 3. KEI 4. Finolex

3 PVC Pipe & its accessories 1. Preciesion 2. BEC Plast 3.Plaza 4. Polycab

4 MCB/MCCB/DB 1. Schneider 2. L&T 3. Legrand 4.Havells 5 C&S 6. Standard

5 Armoured/Unarmoured Cable (Power Cable HD) 1. R.R. 2. Polycab 3. KEI 4. Finolex

6 Ceiling fan 1200 mm / 1400 mm 1.Bajaj, 2.Havell's, 3.CROMPTON 4.Orient 5. Polar Pazero

7 Fresh air Fan/Exahust fan . 1. Bajaj 2. Crompton 3. Usha 4. Havells

8 LED light (luminaries) LED Bulb & LED Street light fitting 1. Bajaj 2. Crompton 3. Energy Green 4. Philips 5.Wipro, 6. Havells

9 Pump 1. Kirlosker 2. Crompton 3.CRI 4.Texmo

10 CCTV Camera 1. CP Plus 2. Bosch 3.Sony 4.Honeywell

11 CCTV Camera 1. CP Plus 2. Bosch 3.Sony 4.Honeywell