Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹18,174
Closing Date
19 Apr 2025, 11:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
Srinivas T
Replacement of existing Age old/Sluggish 13 Nos of 11kV 20/25 kA Switchgears(MCVCB) by 11kV 31.5kA Switchgears(MCVCB) for Bank-1 at 66/11 kV Hunasuru S/s in Hunasuru Tq Mysuru Dist under Hootagally Operation Division, KPTCL on PTK basis (Reserved for SC category)
KPTCL/2024-25/SS/WORK_INDENT2197
KPTCL/2024-25/SS/WORK_INDENT2197
Reserved
Sub-Station
Two Tender Document System(Two Cover)
KPTCL CEE Transmission Zone Office Mysuru
12 documents required · 12 mandatory
Valid Caste Certificate in support of reserved tender participation
Valid Karnataka Residential Certificate
valid Super grade Electrical Contractor License issued by the Government of Karnataka as on the date of opening of techno-commercial bid (refer 2.3 of ITT)
Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years as per 3.10(iv) of ITT.
3.6: Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under:Assessed Available Tender Capacity: (AxNx5-B)Where A-Maximum value of works executed (KPTCL & Non-KPTCL) in any one year during the last five years (updated to FY 2024-2025) taking into account the completed as well as works in progress. N-Number of years prescribed for completion of the works for which tenders are invited.B-Value, at FY 2024-2025 price level of existing commitments (KPTCL & Non-KPTCL)and on-going works (KPTCL & Non-KPTCL) to be completed during the next 1(One)year.Note:(i)The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.(ii)A self-declaration is to be uploaded by the Tenderer stating that the information with regard to assessed available tender capacity (Works on Hand) furnished are correct.
Even though the Tenderers meet the above criteria, they are subject to be disqualified if they have:- Made misleading or false representations in the forms, statements and attachments submitted in proof of the qualification requirements and/or- Record of poor performance such as abandoning the works, not properly completing the contract, inordinate delays in completion, litigation history, or financial failures etc. and/or- Participated in the previous Tender for the same work and had quoted unreasonably high Tender prices and could not furnish rational justification.
Bidder shall ensure that soft copies of Power of Attorney, Letter of Undertaking, No Deviation CERTIFICATE as revised in Annexure , Any other undertaking / agreement (if applicable) are to be uploaded besides submitting the Originals to the office of the Chief Engineer, Electy., Operation, KPTCL, Mysuru, after the last submission date and on or before the date and time of opening of techno commercial bids
Bidder shall ensure that soft copies of i. Letter of undertaking for Non performance ii. Letter of undertaking for Risk and Cost iii. Letter of undertaking for Litigation iv. Letter of undertaking to source the supply of equipment material from KPTCL approved Vendors only (if applicable) are uploaded besides submitting the Originals to the office of the Chief Engineer, Electy., Operation, KPTCL, Mysuru, after the last submission date and on or before the date and time of opening of techno commercial bids as per 3.10(xviii) of ITT
i. Letter of undertaking to source the equipment/material for the work from the approved Vendors who meet the eligibility clauses regarding restrictions on procurement from a country which shares a land border with India (Annexure-XVI) ii. Letter of undertaking as per clause No.1.5 of Annexure-XVII iii. Letter of undertaking as per clause No.1.6 of Annexure-XVII (if applicable) are uploaded besides submitting the Originals to the office of the Chief Engineer, Electy., Operation, KPTCL, Mysuru, after the last submission date and on or before the date and time of opening of techno commercial bids.
ESI certificate
EPF Certificate
Shall upload valid GST Certificate and PAN copy
Minimum Average Annual Turnover (MAAT) of the bidder for best one(01) year out of last preceding five financial years, shall not be less than Amount Put to Tender as per 3.2(a) of std tender documents(ITT).
₹500
₹18,174
5 Apr 2025
5 Apr 2025
21 Apr 2025
17 Apr 2025
8 Apr 2025
Replacement of existing Age old/Sluggish 13 Nos of 11kV 20/25 kA Switchgears(MCVCB) by 11kV 31.5kA Switchgears(MCVCB) for Bank-1 at 66/11 kV Hunasuru S/s in Hunasuru Tq -Supply Portion
4core x 6sqmm Copper Control cable (New Cable)
Replacement of existing Age old/Sluggish 13 Nos of 11kV 20/25 kA Switchgears(MCVCB) by 11kV 31.5kA Switchgears(MCVCB) for Bank-1 at 66/11 kV Hunasuru S/s in Hunasuru Tq-Erection and decommissioning
Switchgear: 11 kV MCVCB, 500 MVA, 31.5 kA, 1600A Feeder Panel (Scada Compatible)
Releasing & Re-erection of Breaker for Reaarangment work as explained in Annexure
Releasing & Relaying of 3C x 240 Sqmm 11kV XLPE UG Cable
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
4core x 6sqmm Copper Control cable (New Cable)
Supply and fixing of
6 sqmm lugs and ferrules for Copper Control cable
Grounding of equipment with 50 x 6 mm G.I. Flat and connecting Equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and conn...
11 kV MCVCB, 500 MVA, 31.5 kA, 1600A
Feeder Panel (Scada Compatible)
Testing & Commissioning:
Releasing & Reerection of Breaker
for Reaarangment work as explained in Annexure
Decomissioning of existing 11kV Indoor / Outdoor Switchgear.
De-wiring 11kV Indoor/Outdoor Switchgear
Loading of 11 kV Switchgears
(Loading at Hunsuru S/s)
UnLoading of 11 kV Switchgears
(Unloading at Store)
Transportation of released Breakers etc from 66/11kV Hunsuru S/s to Divisional Major works store, Hootagalli Mysore.
Replacement of existing Age old/Sluggish 13 Nos of 11kV 20/25 kA Switchgears(MCVCB) by 11kV 31.5kA Switchgears(MCVCB) for Bank-1 at 66/11 kV Hunasuru S/s in Hunasuru Tq -Civil Portion
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and laying to required line and slope roofing with semicorrugated ( Trafford ) asbestos cement sheet 6mm. thick fixed with galvanised iron J or L hooks, bolts and nuts 8mm. dia C.I plain and...
Providing and fixing ridges, hips with asbestos cement sheet roofing with G.I. J or L hooks, bolts and nuts 8mm. dia G.I.plain and bitumen washers, serrated or plain wings, adjustable ridges, includin...
Removing and refixing of AC sheet of existing switch gear shelter
Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm
including the cost of materials, labour charges, required tools and plants etc., complete....
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
BOQ.zip
Others - BOQ • 1.72 MB
Work on Hand details format (Tender).doc
Techno-Commercial Worksheet • 0.06 MB
Volume II A & B.zip
Technical Information / Worksheet • 20.14 MB
TENDER DOC HUNSUR.pdf
Tender Document • 1.90 MB
NIT HUNSUR.pdf
Instructions to Tenderers • 0.76 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .