Chandigarh

Active

Works

Public Health Products

Providing and Laying of T.T. Water connection along with Renovation of Toilet and Bathroom attached with Mess at 3rd Floor in Regional Institute of English, Sector-32, Chandigarh

Chandigarh Administration

Chandigarh

Amount: ₹5.9 LCloses: 23 Sept 20263d left

Timeline

Published17 Sept 2026
Closes23 Sept 2026
Bid Opening24 Sept 2026

Tender Value

₹5.9 L

EMD Value

₹11,900

Closing Date

23 Sept 2026, 5:00 pm3d left

Tender Inviting Organisation

Name

Executive Engineer

Address

Executive Engineer Project Public Health Division No.1 Chandigarh

Work Description

Providing and Laying of T.T. Water connection along with Renovation of Toilet and Bathroom attached with Mess at 3rd Floor in Regional Institute of English, Sector-32, Chandigarh

Tender Information

Tender ID

2026_CHD_95539_1

Reference Number

PH1/2026/470

Tender Type

Open Tender

Product Category

Public Health Products

Form of Contract

Percentage

Period of Work

60 days

Location

Chandigarh

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Scanned copy of Online UTR No.and Transaction Slip Receipt for Rs.11900Works completed during last 7Yrs, Performance Certificates, Annual Financial Turn Over for the last 3yrs, Affidavit reg.non blacklisted as mentioned in the tender documents.

Documents Required

2 documents required · 2 mandatory

Fee/PreQual/Technical

RequiredScannedcopyof OnlineUTR No.andTransactionSlipReceiptfor Rs.11900Aff.regnonblacklistedEnlistment. (.pdf)

Finance

RequiredFinancial bid (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹11,900

Important Dates

Last Activity

17 Sept 2026

Published

17 Sept 2026

Bid Opening

24 Sept 2026

Download Starts

17 Sept 2026

Download Ends

23 Sept 2026

Submission Starts

17 Sept 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (89 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Excavating trenches by mechanical/ manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
1.1	All kinds of soil	-	-	-	-
1.2	Pipes, cables etc, not exceeding 80 mm dia.	399.9	Mtr	209.78	₹83,891.02
2Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
2.1	1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	0.75	Cum	7,665.78	₹5,749.34
2.2	1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)	0.48	Cum	6,342.6	₹3,044.45
3Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
3.1	Cement mortar 1:4 (1 cement : 4 coarse sand)	0.56	Cum	9,092.05	₹5,091.55
4	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Size 300 x 600 mm)	32.13	Sqm	1,233.72	₹39,639.42
5Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 21.70 MB

Work Item Documents

BOQ_117359.xls

BOQ • 0.38 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Excavating trenches by mechanical/ manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
1.1	All kinds of soil	-	-	-	-
1.2	Pipes, cables etc, not exceeding 80 mm dia.	399.9	Mtr	209.78	₹83,891.02
2Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
2.1	1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	0.75	Cum	7,665.78	₹5,749.34
2.2	1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)	0.48	Cum	6,342.6	₹3,044.45
3Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
3.1	Cement mortar 1:4 (1 cement : 4 coarse sand)	0.56	Cum	9,092.05	₹5,091.55
4	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Size 300 x 600 mm)	32.13	Sqm	1,233.72	₹39,639.42
5Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Excavating trenches by mechanical/ manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :

1.1

All kinds of soil

1.2

Pipes, cables etc, not exceeding 80 mm dia.

399.9

Mtr

209.78

₹83,891.02

2Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

2.1

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

0.75

Cum

7,665.78

₹5,749.34

2.2

1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

0.48

Cum

6,342.6

₹3,044.45

3Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

3.1

Cement mortar 1:4 (1 cement : 4 coarse sand)

0.56

Cum

9,092.05

₹5,091.55

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Size 300 x 600 mm)

32.13

Sqm

1,233.72

₹39,639.42

5Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: