Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.0 LAccepted-AOC NO 14 M C RAJA STREET MITTANAMALLI I A F AVADI CHENNAI 600 055 | CHENNAI | CHENNAI | TAMIL NADU | 600055 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹17.7 L+₹56,130 (3.28%)Rejected-AOC | L2 | Rejected-AOC Not being L1 | |
| 3 | L3₹18.0 L+₹89,794 (5.24%)Rejected-AOC | L3 | Rejected-AOC Not being L1 | |
| 4 | L4₹18.2 L+₹1.1 L (6.40%)Rejected-AOC | L4 | Rejected-AOC Not being L1 | |
| 5 | L5₹18.4 L+₹1.2 L (7.15%)Rejected-AOC NO 235 PSK ILLAM SANKARAN NAGAR CHINNAMMAN KOIL STREET AVADI CHENNAI 600 054 | CHENNAI | THIRUVALLUR | TAMIL NADU | 600054 | L5 | Rejected-AOC Not being L1 |
Tender Value
Refer Docs
EMD Value
₹54,000
Closing Date
12 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer, Avadi
Garrison Engineer, Muthapudupet, Avadi, Chennai-55
WELCOME MAINTENANCE TO DC-I AREA AND REPAIR/ IMPROVEMENT TO FIRING RANGES AT 23 ED AF STN UNDER GE AVADI
2022_MES_562539_1
8974
Open Tender
Civil Works
Item Rate
270 days
Garrison Engineer, Muthapudupet, Avadi, Chennai
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Garrison Engineer, Avadi
₹54,000
Yes
11 Jan 2023
11 Nov 2022
20 Dec 2022
11 Nov 2022
12 Dec 2022
26 Nov 2022
Amount
Taking down cement plaster on brick or concrete walls/ ceiling surfaces in patches etc. of any description including racking out joints, hacking for key, scrubbing down with water; rubbish off the premises etc., complete all as specified and as directed.
M&L for rendering 5mm thick on concrete surfaces of ceiling in cement mortar 1:3 including finished even and smooth with out using extra cement all as specified and as directed.
M&L for rendering 10mm thick in CM 1:6 on brick work/concrete wall surfaces and finished even and smooth without using extra cement complete all as specifed and as directed.
Material and labour for Preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer all as specified and as directed.
Material and labour for Preparation of newly plastered surfaces of ceilings and applying three coats of white wash all as specified and as directed.
Material and labour for Preparation of old plastered or unplastered surfaces of walls including brooming down, steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash all as specified and as directed
All as per item No. 6.00 described here-in-before but on ceiling.
Material and labour for Preparation of old plastered or unplastered surfaces of walls including brooming down, steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, washing, rubbing down and stopping of distempered surfaces and applying one coat of oil bound distemper all as specified and as directed.
Material and labour for complete removal of existing treatment including preparation of wall surfaces and applying two coats of oil emulsion distemper over a coat of alkali resistant primer all as specified and as directed.
Material and labour for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint etc., complete all as specified and as directed.
Material and labour for preparation of old painted steel and iron surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint etc., complete all as specified and as directed.
S & F 20mm bore Unplasticised PVC pipes including all fittings of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc.,complete and making good the area to match with existing surface, including taking down complete all as specified and as directed.
Supply and fix in repairs Bib taps standard of PTMT 15mm dia (Minimum weight 90 gms) high pressure screwed down for iron pipe or for brass ferrule complete all as specified and as directed.
S&F in repairs 15mm dia (minimum weight 110 gm) Pillar tap standard of PTMT screwed for iron pipe all as specified.
Supply and fix in repairs, 15mm bore (Minimum weight 90gms) Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed.
S&F in repairs 15mm bore dia (Minimum weight 90gms) angle valve of PTMT any colour high pressure screwed for iron pipe and fixed all as specified.
S&F in repairs Swivel shower of PTMT any colour for fixing with 15 mm pipe ( minimum weight 40 gm) complete all as specified and as directed.
S & F in repair PVC grating round 140mm size PTMT (minimum weight 100 gms) all as specified.
S & F in repair 32mm bore PVC waste pipe pressure rating 6Kg/sq.cm for sink / wash basin 90cm long all as specified.
S & F in repairs PVC connections 15mm size with PTMT nuts of length 450mm all as specified.
S & Fixed in repair PVC valveless syphonic action type, flushing cistern 10 ltr capacity low level, white, with inlet ball valve, float and handle including brackets, flush pipe and all accessories all as specified.
S&F in repairs Vitreous China wash Basin (flat back or angle back type) , of size 550x400mm including brackets, waste coupling PTMT, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified.
S&F fixed 20mm bore Ball valves high pressure of PTMT (Minimum weight 210 gms) with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe and fixed. complete all as specified and directed.
S & F in repairs bib tap chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for union pipe or brass ferrule & fixed to 15mm dia pipe all as directed.
S&F in repair 15mm dia chromium plated pillar taps, cast copper alloy with capstan heads screwed down high pressure, with or without lettered 'Hot' of cold with long screed shanks and fly nuts screwed for iron pipe and fixed with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule and fixed complete all as specified.
S & F 15mm bore dia in repair for Brass CP mixer for mixing hot and cold water screwed down for iron pipe and fixed all as specified.
S & F in repairs of 2-in-1 faucet with 1.5m tube stainless steel and hook complete all as specified and as directed.
S&F in repair brass chromium plated tubular towel rail, 20mm dia D type, 60cm long between flanges for cupboard all as specified.
S & F in repairs Vitreous china water closet pan (pedestal pattern), white including fixing bolts, plastic water closet seat, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified.
S & F in repairs Vitreous china water closet squatting pan of 'Orissa' pattern of size 580x 440mm, white, with "integral foot rests",including provision of lime concrete or lean cement bed and making necessary connection to soil pipes and flushing cistern etc complete all as specified.
S & F in repairs sinks with drainage board made of stainless steel sheet 1mm thick for kitchen fixed with plugs, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting unions to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as directed.
S&F in repairs Stainless steel plate rack of size 900X800X230mm with screws and necessary fittings incl cutting to hole fixed to wall complete all as specified and directed.
Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes for the tanks of capacity exc 250 litres and not exc 500 litres and writing date of cleaning in synthetic enamel paint .
Dismantling floor, hearth or wall tiling including cement mortar bedding,(but not backing) and rubbish off the premises complete all as specified and as directed.
M&L Non skid light coloured ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, in floors etc,confirming to IS: 15622 : 2006 grade B II (a) matt superior finish flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15 mm thick in CM 1:4 as bedding layer for floor finishes complete all as specified and as directed.
M&L Non skid light coloured ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, as in skirting etc,confirming to IS: 15622 : 2006 grade B II (a) matt superior finish flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 10 mm thick in CM 1:3 as bedding layer for floor finishes complete all as specified and as directed.
S & F Glazed ceramic coloured tiles of 300x200x7mm thick tiles on vertical surfaces using glazed economy finish grade B III ceramic tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match over rendering in CM 1:3 , 10mm thick on fair faces of brick/concrete wall surfaces complete all as specified and as directed.
Taking out old serviceable glass of any description, from old wooden or metal frames, or stone, concrete or brick surrounds, any thickness or size; hacking out old putty or removing beads etc. including making good breakages in taking out and removing from site, all as specified and as directed .
S&F 3mm thick plain sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm.m in each pane all as specified and as directed.
S&F 4mm thick figured glass pin headed type and glazing with oil putty in squares not exc 0.5 sqm in each pane all as specified and as directed .
S&F in repair Galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks,or galvanised wire staples complete all as specified and as directed.
S & F in repair 300mm ordinary rat rail rod pattern springs including roller and roller plate complete all as specified & directed.
M & L in repair for 18/19mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work including teakwood lipping 6mm thick fixed with nails fixed for cub board shutter.etc all as specified and as directed .
S&F in repairs particle boards 18/19mm thick interior grade BWR type adhesive, fixed with screw to timber frame in shelves,drawers etc, all as specified and as directed .
S&F in repair for Harrison Curtain rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.in repair all as specified and as directed.
Taking down shutters of any description exc 1 Sqm and nexc 2 Sqm and easing, adjusting and also refixing builders hardware as required and renewal of unserviceable screws and refixing in the same opening incl painting touch up to match with the existing colour complete all as specified and as directed.
Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work, complete all as specified and directed.
M&L Brickwork with fly ash bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed
Demolition of cement concrete of any description and in any position not otherwise specifically provided for in any type floor etc.
M&L for 50 mm thick PCC 1:2:4 , type B1, using 20 mm graded stone aggregate as in floor even and smooth without using extra cement finished all as specified and as directed.
M&L for 100 mm thick PCC 1:2:4 , type B1 using 20 mm graded stone aggregate as in floor even and smooth without using extra cement finished all as specified and as directed.
M&L Rendering 15mm thick on fair faces of brick work or concrete surface, in cement mortar 1:4 finished the surface even and smooth without using extra cement , complete, all as specified.
M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of alkli resistance primer complete all as specified.
Material and labour for River sand and saw dust mixture in proportion (1:4) filled in polythene bag paving and laying over sand cushning on firing range including removel of old damaged sand material and plythene begs to a distance n exc 500mtr away from starting point complete all as directed.
M&L for River sand on firing Range with mixing of saw dust in propotion of (1:4) including laying, levelling and finishing the top surfaceincluding removel of old sand / soil to a distance n exc 500mtr away from starting point complete all as directed.
M & L for pre cast cover slab in RCC 1:2:4, type B1, using 20mm graded stone aggregate for manhole, platform, shelfs etc set in cement mortar 1:4 including necessary form work complete all as specified. Note : Reinforcement will be measured and paid separately.
S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
M/s Omm Muruga Enterprises
PSM ENGINEERS
murugan enterprieses
PSK Enterprises
D Subramani and Sons
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .