Enhancement of LT Distribution Network in BLW/Varanasi.

01- Enhancement of LT Distribution Network in BLW /Varanasi.

Supply of L.T. end termination with brass cable glands & Al. lugs as per requirement suitable for following L.T. XLPE cables: e) 185 Sq.mm. x 4Core.

Labour charges for above cable termination as per site conditions.

Supply, Installation, Testing and Commissioning of 800 KVA ( 11 KV /415 V ) ONAN outdoor type transformer with off load tape changer with cable box termination as per DLW specification No. DLW/CEE/23/8 R.

Supply of 95 sq.mm. 3 core. 11KV (E), HT XLPE cable end termination kit.

Labour charges for above cable joint with above jointing kit.

Supply, fixing & connection of L.T. 415 V cubical Panel of 16 Gauge Steel sheet duly painted with mounting of following accessories for In door type. The panel shall have cable entry 8 through cable alley. All connection with copper conductor & with suitable copper lugs. a)1250 A 4 POLE 50kA ACB(I/C)-- 0 2 nos. b)1250 A 4 POLE 50kA ACB(B/C)-- 0 1 nos. c) 800 A 3 POLE 50kA ACB(O/G)-- 10 nos. d) LED Volt meter with inbuilt Selector switch-- 02 nos. e) LED Ampear meter with inbuilt Selector switch-- 02 nos. f) LED type Energy Meter-- 02 nos. g) CT (1250/5)-- 06 nos. h) LED type PIL-- 06 nos. i)Copper Bus bar suitable for 1250A -- lot j) Earth link, Copper lugs etc.

Supply, fixing & connection of L.T. 415 V cubical Panel of 16 Gauge Steel sheet duly painted with mounting of following accessories for In door type. The panel shall have cable entry through cable alley. All connection with copper conductor & with suitable copper lugs. a)1250 A 4 9 POLE 50kA ACB(I/C)-- 0 2 nos. b)1250 A 4 POLE 50kA ACB(B/C)-- 0 1 nos. c) 400 A 3 POLE 36kA MCCB(O/G)-- 06 nos. d) 250A 3 POLE 36 KA MCCB-- 04 nos. e) LED Volt meter with inbuilt Selector switch-- 02 nos. f) LED Ampear meter with inbuilt Selector switch-- 02 nos. g) LED type Energy Meter-- 02 nos. h) CT (1250/5)-- 06 nos. i) LED type PIL-- 06 nos. j)Copper Bus bar suitable for 1250A -- lot k) Earth link, Copper lugs etc.

Supply, fixing & connection of L.T. 415 V cubical Panel of 16 Gauge Steel sheet duly painted with mounting of following accessories for In door type. The panel shall have cable entry 10 through cable alley. All connection with copper conductor & with suitable copper lugs. a)1250 A 4 POLE 50kA ACB(I/C)-- 0 1 nos. b) 800 A 3 POLE 50kA ACB(o/G)-- 0 2 nos. c) 400 A 3 POLE 36kA MCCB(O/G)-- 0 4 nos. d) LED Volt meter with inbuilt Selector switch-- 0 1 nos. e) LED Ampear meter with inbuilt Selector switch-- 01 nos. f) LED type Energy Meter-- 01 nos. g) CT (1250/5)-- 0 3 nos. h) LED type PIL-- 03 nos. i)Copper Bus bar suitable for 1250A -- lot j) Earth link, Copper lugs etc.

Supply, fixing & connection of L.T. 415 V cubical Panel of 16 Gauge Steel sheet duly painted with mounting of following accessories for outdoor type. The panel shall have cable entry 11 through cable alley. All connection with copper conductor & with suitable copper lugs. a) 800 A, 4P, MCCB (B. Cap. -50 kA) -------01No.(I/C) b) Copper bus bar ( 800A) ------- 01 set. c) 400 A, TP, MCCB (B. Cap. -36 kA) -------04No. e) C.T.(800/5) --------01 Set (03 No) f ) Voltmeter (0-500V) with selector switches.--- 01 No. g) Ammeter (0-630A with selector switches.- 01 No. h) Phase indicating light. i) Earth link, Copper lugs etc.

Supply, fixing & connection of L.T. 415 V cubical Panel of 16 Gauge Steel sheet duly painted with mounting of following accessories for outdoor type. The panel shall have cable entry 12 through cable alley. All connection with copper conductor & with suitable copper lugs. a) 400 A, 4P, MCCB (B. Cap. -36 kA) -------01No.(I/C) b) Copper bus bar ( 400A) ------- 01 set. c) 250 A, TP, MCCB (B. Cap. -36 kA) -------04No. d) C.T.(400/5) --------01 Set (03 Nos.) e ) Voltmeter (0-500V) with selector switches.--- 01 No. f) Ammeter (0-630A with selector switches.- 01 No. g) Phase indicating light. h) Earth link, Copper lugs etc.

Supply, fixing & connection of L.T. 415 V cubical Panel of 16 Gauge Steel sheet duly painted with mounting of following accessories for outdoor type. The panel shall have cable entry through cable alley. All connection with copper conductor & with suitable copper lugs. a) 160 A, 4P, MCCB (B. Cap. -25 kA) -------02No.(I/C) b) Copper bus bar ( 160A) ------- 01 set. c) 63 A, TP, MCB (B. 13 Cap. -10 kA) -------06No. d) Earth link, Copper lugs etc.

Supply, installation & commissioning of 400 A, 3pole, MCCB (B- Cap -36KA) in existing LT Panel including modification in the panel with provision of copper bus, rotary handle & partition with suitable lugs etc complete in all respects

Supply, installation & commissioning of 250 A, 3pole, MCCB (B- Cap -36KA) in existing LT Panel including modification in the panel with provision of copper bus, rotary handle & partition with suitable lugs etc complete in all respects

Supply, installation, testing & commissioning of 415 V L.T. Cubical Panel of 16 gauge Steel sheet, dust & vermin proof, duly painted, floor mounted (Outdoor type). The Panel shall have cable entry through cable alley. All connection with copper conductor, bimetallic washer & with suitable copper lugs etc. wherever required. The panel consists of following accessories complete in 16 all respects: a) 400 A 4 POLE 36kA MCCB (I/C) - 03 Nos. b) 400 A 4 POLE 36kA MCCB (B/C) - 02 Nos. c) 250A 3 POLE 36 KA MCCB - 05 Nos. d) 100A 3 POLE 18 KA MCCB - 05 Nos. e) SPREADER suitable for 400/250/100A MCCB - 15 Nos. f) 63 A 4Pole, MCB , 10KA - 05 Nos. g) 6 A Single Pole, MCB , 10KA - 03 Nos. h) ON delay Timer - 01Nos. i) 3 Phase Power Contractor - 01 Nos. j) 3- phase LED Energy Meter - 03 Nos. k) LED Volt meter with inbuilt Selector switch - 03 Nos. l) LED Ampear meter with inbuilt Selector switch - 03 Nos. m) LED type PIL - 09 Nos. n) CT (400/5) - 09 Nos. O) Copper Bus bar suitable for 400 A

Supply, installation, testing & commissioning of 415 V L.T. Cubical Panel of 16 gauge Steel sheet, dust & vermin proof, duly painted, floor mounted (Outdoor type). The Panel shall have cable entry through cable alley. All connection with copper conductor, bimetallic washer & with 17 suitable copper lugs etc. wherever required. The panel consists of following accessories complete in all respects: a) 400 A 4 POLE 36kA MCCB (I/C) - 01 Nos. c) 250A 3 POLE 25 KA MCCB - 01 Nos. c) 160A 3 POLE 25 KA MCCB - 01 Nos. d) 100A 3 POLE 25 KA MCCB - 01 Nos. e) 63 A 3Pole, MCB , 10KA - 04 Nos. f) Digital Volt meter, Ammeter & frequency meter with inbuilt Selector switch,control fuse base & carrier - 01 Nos. g) LED type PIL - 03 Nos. h) CT (400/5) - 03 Nos. i) Copper Bus bar suitable for 400 A

Supply , installation, testing & commissioning of 415 V L.T. of 16 gauge Steel sheet Dust & vermin proof, floor/wall mounted Indoor type L.T. Cubical Panel. The cable shall have cable 18 entry through cable alley. All connection with copper conductor, bimetallic washer & with suitable lugs etc. wherever required. The panel consists of following accessories, complete in all respects: a) 63A, 4P, MCB -01 No. b) 40A, SP,MCB - 03 Nos. c) 40A DP Power contactor - 03 Nos. d) Timer - 03 Nos. e) Neutral link, Copper lugs, fuse grip etc.

Providing and making of pucca trench of size 75cm width and 100cm depth from ground level with supply & fixing of 3 nos. MS angle bracket vertically at a space of 25 cm on trench 19 wall per mtr run for holdidng cable, size of GI angle 50 x 50 x 6mm of length 60cm, 70cm and 180 cm respectively out of which 15 cm upward bend for protection of cable at other end of brackets including provision and making of GI frame covering made of 40 x 40 x 6mm GI angle of rectangular shape of size 0.85 x 1 mtr & 09 nos. 16mm dia GI rod of length 85 cm each are welded to frame complete etc as required as per direction of site Engineer for Control cable.

Covering of existing cable trench with 4mm thick MS chequered plate.

Earthing of Transformer, LT/HT Panels, Lightening Arrester etc. by Copper plate, 4 set in obe job. Earthing shall be as per DLW Drg. No. EL/LB-4/PE-438 R-4.

SITC of maintenance free earthing arrangement complete and as per technical spec. No. RDSO/PE/SPEC/PS/0109(REV '0')-2008, Amdt.'1'. Earthing will be done as per IS: 3043-1947 amdt. Up to date.

Supply of 8 SWG dia. G.I wire.

Laying & connection of 2x 8 SWG G.I. wire from earth pit to pole/Panel in under ground with misc. hardware i.e. Nut, bolt, washer etc.

Boring/Cutting of road as per required size for laying of 70/100 mm dia. G.I./HDPE pipe.

Supply, fabrication & installation of mettalic hut of suitable size for protection of the feeder pillar/LT panel. It include of sufficient height foundation, marked as danger. Name plate, lockable door of both side etc.

Supply of 75 mm. Dia. HDPE pipe.

Supply of 110 mm. Dia. HDPE pipe.

Supply & fixing of M.S. clamp.( For clamping of HDPE pipe with pole )

Removal of existing old condemmed cable from trench, pole and DB,s

Shifting of 630A out door type ACB/MCCB Panel from OGH to SS-08 including foundation & connection of Incoming/Out going cables.