Item-3 External Electrification and Street light work of shops at Block A and B in Housing Scheme Near DTO Office RHB Hanumangarh

Amount

Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

LT cable 4 core 185 sqmm (Rate Per Meter)

Providing & Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover ) /Toughened Glass cover and secondary lens on each LED & should be SMD type of 3 to 5 watt each . The System efficacy >=125 lm/ wt and potted driver & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety , Power Factor >0.95 driver Efficiency >85% ,THD(I) <10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver current <750mA. The luminaire shall be BIS certified and Trade mark certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened , CRI >70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

LED Street Light fixture with Minimum lumen output 11225 lm

Bidder Name

Amount

M/S Jindal Electricals (GSTN-08AEJPJ5458A1ZL) BID ID -3177413

M/S Pooja Electricals (GSTN-08AMJPM5477G1ZM) BID ID -3159512

POWER GEN ENGG CO (GSTN-08ACIPG4004C1Z9) BID ID -3180310

ISHIKA ENTERPRISES (GSTN-08AJFPC5805K1Z9) BID ID -3180664

POWER GEN ENGG CO (BID ID -3180310)

ISHIKA ENTERPRISES (BID ID -3180664)

M/S Pooja Electricals (BID ID -3159512)

M/S Jindal Electricals (BID ID -3177413)

ISHIKA ENTERPRISES (BID ID -3180664)

POWER GEN ENGG CO (BID ID -3180310)