PROVISION OF HARD STANDING AND SHED ALONG WITH ASSOCIATED WORKS FOR SOLID WASTE MANAGEMENT AND PROVN OF CERTAIN SANCTIONED WORK AT AIR FORCE STATION PATHANKOT

Amount

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out inhard/dense soil complete all as specified and as directed by the Engineer-in-Charge.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes,laying of cable etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in any type of soil, complete all as specified and directed by Engineer-in-Charge.

Cement concrete in foundations, filling and mass-concrete Type D2 1:4:8 (40 mm graded aggre-gate) complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in hard soil complete all as specified and directed by Engineer-in-Charge.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge.

Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in Cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick wall, built in Cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

S & F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed in brick walls as directed complete all as specified and directed by Engineer-in-Charge.

Provinding cement concrete type B-0 (1:2:4) (12.5mm graded aggregate) as in coping including weathering slightly rounded or chamfered angles and throating complete all as specified and directed by Engineer-in-Charge.

Formwork to sides of concrete foundations , footings, base of columns etc., complete all as specified and directed by Engineer-in-Charge.

Formwork to sides of pillars, posts, struts,piers, columns and stanchions, complete all as specified and directed by Engineer-in-Charge.

Formwork to sides and soffits of floor or roof beams, lintels, lintel beams cantilevers, shelves including supports, complete all as specified and directed by Engineer-in-Charge.

Reinforced cement concrete (1:2:4) Type B1 (using 20 mm graded stone aggregate) in foundations, including rafts, footing, foundation base for column etc complete all as specified and directed by Engineer-in-Charge.

Reinforced cement concrete (1:2:4) Type B1 (using 20 mm graded stone aggregate) in columns, pillers, post and struts etc, complete all as specified and directed by Engineer-in-Charge.

Reinforced cement concrete (1:2:4) Type B1 (using 20 mm graded stone aggregate) in beams, cantilivers, lintels etc complete all as specified and directed by Engineer-in-Charge.

Mild TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E 250) Quality A or Fe-290 (Gde E-165), complete all as specified and directed by Engineer-in-Charge.

All as per item No 16 above but 5mm dia and over up to and including 10 mm dia in stirrups, specers and binders complete all as specified and directed by Engineer-in-Charge.

Pressed steel frame made out of MS sheet 1.25mm thick of size 105x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkats, complete all as specified and directed by Engineer-in-Charge. NOTE:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement.

Supplying and fixing of 35 mm thick plain framed panelled door shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply ,the size of rail and style as per IS : 1003 Part-I, Kiln seasoned and chemically pressure treated factory made shutters wood is to be incorporated all as specified, complete all as specified and directed by Engineer-in-Charge. NOTE :- All screws shall be self tapping chrome plated.

Supply and fixing of 250 mm Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge.

Preparation of new or previously untreated surfaces of wood or wood based mtrl any description, over 10cm in width or girth,not otherwise described and two coats of synthatic enamel paint over pink primer complete all as specified and directed by Engineer-in-Charge.

Factory made Steel window/ Ventilator 1.25mm thick box type (primer coated) ERW hollow P section of size 60 mm x25 mm including grill using 10 sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bar of T Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T Section of size 60mmx25mm and 1.25mm thick incl cutting holes and good dismantled portion in PCC(1:2:4) type B1 and match the disturbed portion with existing surface four Nos for each window including following fitting welded to frame shutter : (a) Hold fast,150mm long of 12mmx3mm made to shape O4 Nos per window (b) handle of Z Sec20mmx25mm, 100mm long-per No leaf (c) MS Tower bolt 150mm long-02No per leaf . (d) Z section 20mmx25mm, 100mm long stopper 1 No per leaf. (e) cleat 55mm long of hollow square 15mmx20mmx63mm welded to hinge. 1 No per leaf (f) MS Pintal hinges of size 75mmx12mm. 2 Nos per leaf, (g) Stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with alluminium wire staples (h) Glass pane 3mm thick fixed with MS pin and oil putty including painting to match. (j) Including two coats of synthetic enamel paint complete. NOTE: During Fixing of window, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

Rendering 15mm thick in cement mortar 1:6 on brick work or concrete surfaces and finished even and smooth without using extra cement on walls complete all as specified and directed by Engineer in Charge.

Rendering 15mm thick in cement mortar 1:4 on brick work or concrete surfaces and finished even and smooth without using extra cement on walls complete all as specified and directed by Engineer-in-Charge.

Cement concrete 100 mm thick Type D2 1:4:8 (40 mm graded aggre-gate) as in sub base complete all as specified and directed by Engineer-in-Charge.

Cement concrete 40 mm thick (1:2:4) type B-1, ( using 20mm graded stone aggregate) as in flooring fininshing with neat cement slurry finish complete all as specified and directed by Engineer-in-Charge.

Sand filling under floors including watering and consolidation complete all as specified and directed by Engineer-in-Charge.

Machine pressed coloured precast cement concrete interlocking paver block 80 mm thick any shape and sizs as directed, confirming to IS 15658-2006, M-35 Grade as in floor etc. set and jointed with gray cement and pigment complete all as specified and directed by Engineer-in-Charge.

Excavation in post holes (or similar holes) each n. exc 0.5 cu.m, getting out, returning filling in and well ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surface in hard / dense soil complete all as specified and directed by Engineer-in-Charge.

S&F rolled mild steel as in main and cross beams, hips and jack rafters, purlins where connected to commen rafters and running rails fixed with angle cleat or other connecting plates complete all as specified and directed by Engineer-in-Charge.

Framed work as in door or gates of angle or other section with gusset plate, rails braces, etc complete , drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks or hinges (exclusive of steel sheeting or other covering , running rails and guirders) and hanging also fastening and fixing complete confirming to Fe 290 Gde E-165 complete all as specified and directed by Engineer-in-Charge.

S&F mild steel works as in roof trusses (framed), trussed, purlins, crain gantries, rails and fastening and heavy brackets framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 290-W (Grade E-165) complete all as specified and directed by Engineer-in-Charge.

Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof coverings/cladding to wall,fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof coverings/cladding to wall,fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

Mild steel fencing posts and struts in fencing including cutting bending top to shape as directed drilling holes matching for barbed wire, including fillet on back side of fencing post and all necessary drilling work complete all as specified and directed by Engineer-in-Charge.

S&F Chain link fencing using 4mm dia GI wire 75x75mm mesh (weight not less then 4 Kg/ Sqm) including line wires, any mesh, size & type to any type of standards, rails, straining bolts, etc. including provision of binding wire and dismantling of existing chainlink fencing complete all as specified and directed by Engineer-in-Charge.

TMT bars 12 mm dia round cut to length bent to shape for stifners etc and similar work complete all as specified and directed by Engineer-in-Charge.

S&F Flat iron 40 x 6 including fixing clamps or support to chain link fencing etc complete all as specified and directed by Engineer-in-Charge.

S&F Mild steel screw bolts (machine made) 5 to 10mm dia of shank with hexagonal or square heads at one end and screwed the other, each screw end to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long complete all as specified and directed by Engineer-in-Charge.

Preparation of new or previously untreated steel surfaces of any description over 10 Cm width and girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Preparation of newly plastered surfaces of wall applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

Preparation of newly plastered surfaces and applying two coats of oil bound distemper, over a coat of primer including chalk whitening on plastered surfaces of walls complete all as specified and directed by Engineer-in-Charge.

Preparation of newly plastered surfaces of wall applying two coats of cement base paint over a coat of white wash complete all as specified and directed by Engineer-in-Charge.

M&L for 150 thick soiling (or sub base) with broker boulders or quarried stone, inter stices filled surfaces formed, rolled and consolion to required and chamber by using 8 to 10 ton power roller complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of joist, channel, angle, I section or steel tubes for structural purpose fixed independently without connecting plates including roller and fixing arrangement of Volley Ball Net etc Fe-410 W (gde-E-250) complete all as specified and directed by Engineer-in-Charge.

Cement concrete 1:2:4 type B-1 (20 mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

Cement concrete 1:2:4 type B-1, 100 mm thick (20 mm graded aggregate) as in floors, etc. concrete complete all as specified and directed by Engineer-in-Charge.

M&L for all weather Acrylic synthetic surfacing Eight layers ultra cushion by applying following complete all as specified and directed by Engineer-in-Charge. (i) One layer concrete primer. (ii) One special layer fibre jali to prevent cracks (iii) One layer of Acrylic Resurface. (iv) One layers of imported high class sports field Granule Cushion with preservative fluid. (v) Two layers of imported high class sports field Power Cushion with preservative fluid. (vi) Two layers of color coating (Red/Green/Blue) (vii) Specifications : Surface tuxture : More texture with less abrasivensess. (viii) Surface Colour : as directed (Red/Green/Blue) (ix) Resistance to wear : Table H18 1000 cycle Glass : 3.6% Seculars Reflections : 0.1-0.3 (x) Temprature : 15-21 degree celsius (xi) UV Treated : Fade Resistant (xii) Coat : 100% Acrylic

Court line marking by using line taping (Provides high precision of marking) which layes down strips of 1" to 2" wide marking tape from 1 to 4 inches wide using imported hi class sport line marking paint (T/C white line)

Supply and fixing of yallow board of size 1.00 x 1.00 m of 1.6 mm thick cold rolled sheet and powder coated with yellow paint. The board have provided with appropriate hooks made out of 10 mm round bar for hanging fire extinguishers and fire buckets. Individual fire exinguishers are to be hanged in this yellow board so the hooks to be hold the extinguishers. Operating instructions displayed on the board for each type of fire extinguishers to be plased above of hooks. The operating instruction are to be written with red paint on a white coloured acrylic sheet of size 0.45x0.45 m. The sheet is to be fixed on the metalic board with four Nos of screw/bolts complete all as specified and directed by Engineer-in-Charge.

Supply only liquid water proofing compound complete all as specified and directed by Engineer-in-Charge.

Providing, cement concrete type B-1 1:2:4 using 20 mm graded crushed stone aggregate as in benching of manholes, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating,including necessary form work, complete all as specified and directed by Engineer-in-Charge.

Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles, complete all as specified and directed by Engineer-in-Charge.

Glazed ceramic coloured tiles in vertical surface 450X 350X 5-6mm thick, as in skirting, dado set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles complete all as specified and directed by Engineer-in-Charge.

Rendering 10mm thick in cement mortar 1:3 on brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Providing 25 mm thick cement concrete (1:2:4) type B-1 (using 20 mm thick graded stone aggregate) as in floor, laid in panels complete all as specified and directed by Engineer-in-Charge.

Screed bed or bedding layer 15 mm thick in cement mortar 1:4 for laying floor finishes finished even and rough complete all as specified and directed by Engineer-in-Charge.

Taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge.

Galvanised steel water tubing 15 mm bore medium grade with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed by Engineer-in-Charge.

Galvanised steel water tubing 20 mm bore medium grade with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of PVC (SWR) pipes single socketed, in any length of 110mm bore with rubber ring joints, laid in trenches or in floor , complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of PVC (SWR) pipes single socketed, in any length of 110mm bore with rubber ring joints,fixed to wall , complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of 110 mm bore PVC (SWR) bend any radius complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of 110 mm bore PVC (SWR) bend any radius with access door complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of PVC (SWR) floor trap 110 mm dia complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of CI manhole cover of size n exc. 0.36 sqm complete all as specified and directed by Engineer-in-Charge.

Plain cement concrete, type C-2 (1:3:6) (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of powder coated aluminum door using 96.6 mm x 44.8 mm x1.6 mm aluminum chowkhats 84.0 x47.7 mm x1.6 mm section vertical styles 101.60 x44.88 x1.6 mm rails mounted on floor spring mortice lock 02 Nos tower bolts 150 mm ,sliding bolts 300 mm long 01 No, door handles and fittings panel with 12 mm thick PVC board with density not less 600 kg per cum and top panel with 5.5 mm thick plain glass fice with snap beading rubber of suitable size and each shutter n.exc 0.950m in width complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of powder coated aluminum partition using 95.6 mm x 44.8 mm x 1.6 mm frame work with 12 mm thick PVC board with density not less 600 kg per cum /5.5 mm thick frosted glass including beading for fixing board each panel n.exc 1.20 sqm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of powder coated aluminum window using 63 mm x38 mm x1.6 mm chowkhats with 48 mm x48 mm x1.6mm openable section as in shutter including ornamental aluminum grill, 5.5 mm thick glass panes of approved make with rubber for fixing glass/stainless steel wire cloth, 0.25 mm to 0.36 mm nominal dia of wire & average width of aperture 1.40 mm to 2 mm & fixed with aluminum wire staples and including builder hardware such as aluminum handles 100 mm -02 Nos, tower bolts 100 mm 02 Nos, hooks and eye -02 Nos 150 mm , butt hinges 100 mm 04 Nos etc., complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for Stainless steel sink with drainage board, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including bedding in cement mortar (1:4) on dwarf wall or including fixing cantilever cast iron brackets, connecting union to pipe etc., overall size 915mm x 460mm with bowl size 410mm x330mm x 160mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 15 mm bore bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of 450 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of rotational polyethylene water storage tank 3 layer white colour water tank, nontoxic effect, algea formation protection (made from Virgin grade of polyethylene material which is duly stablized with anti-oxident plastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top),the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including Supply and fixing necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia PTMT valves high pressure of PTMT with epoxy coated aluminum rod & high-density plastic ball and 20 mm brass stop cock etc including dismantling existing water tank complete all as specified and as directed by the Engineer-in-Charge

Supply and fixing of 15 mm bore stop valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge.

Supply and install split type air conditioner units indoor/outdoor complete with cordless remote control unit with stand and digital invertyer twin rotary compressor of capacity 1.5 Ton with NON CFC based refrigerant including mounting arrangements for indoor and outdoor unit using wooden board as required at site including copper piping of suitable length duly insulated as required at site and making good to ditrubed surfaces matching with existing complete all as specified and directed by Engr-In-Charge.

Wiring for circuit/submain wiring alongwith earth wire with the 2x4.0 sq. mm +1x2.5 sq. mm of FRLS PVC insulated copper conductor, single core cable in concealed Non metallic rigid PVC conduit medium grade ISI marked of appropriate size complete all as spefcified and as directed by the Engineer-in-Charge.

Supply and fixing Single pole and neutral sheet matel enclosure with a two pin and earth plug and socket complete with one single pole MCB of rating 20 Amps concrete complete all as specified and as directed by the Engneer-in-Charge

Supply and fixing Voltage stablizer for automatic operation single phase naturally air cooled wall mounted, copper wound with digital display indoor type for AC & designed for input variation 140 V to 250 V with output voltage stablizer at 230 V with accuracy of ± 3 % and capacity of 5 KVA , complete all as specified and directed by Engineer-in-Charge.

Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 1 sqmm PVC insulated unsheathed copper conductor single core FRLS cable (green color) as earth lead in and including concealed non metalic rigid PVC conduit with all fittings (ISI Marked) upto ceiling height and on surface at ceiling, controlled by one switch including CI/MS sunk box of required size complete all as specified and directed by Engineer-in-Charge

All as per srl item No-85 above but for one 3 pin 5A socket outlet independent controlled by one switch complete all as specified and directed by Engineer-in-Charge.

Point wiring for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable FRLS (green color) as earth lead in and including non metalic rigid concealed PVC conduit with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size complete all as specified and directed by Engineer-in-Charge.

Switch piano flush button single pole one way 5 amps 240 volts complete all as specified and directed by Engineer-in-Charge.

Switch piano flush button single pole one way 15 amps 230 Volts complete all as specified and directed by Engineer-in-Charge.

Socket out let, 6 pin 5 and 15 amps multi purpose 2 in 01 flush type, 230 volts complete all as specified and directed by Engineer-in-Charge.

Socket 5 amps 5 pin flush type, 230 volts white finish, ISI Marked complete all as specified and directed by Engineer-in-Charge.

Ceiling rose surface bakelite 3 terminals complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of LED box type T/L fitting pre-wired for LED tube with enegry efficient LED tube extruded aluminium heat sink & high efficiency diffuser 4 Ft version for 16/18 Watts, and 16/18W LED rod including connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm all as required complete all as specified and directed by Engineer-in-Charge.

Supply and fix sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces complete all as specified and directed by Engineer-in-Charge.

Supply and fixing MCB SP 240 volt 5 to 40 Amps, 240 Volts, 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed by Engineer-in-Charge.

All as per item No 95 here-in-before above but SPN 5-30 Amps, 240 Volts, 10 KA.complete all as specified and directed by Engineer-in-Charge.

Earthing complete with galvanised cast iron earth plate electrode of size 600x600x6.3mm thick busied directly in ground l as earth electrode with top edge of the earth plate not less than 2.25mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover with handle of angle iron frame of size 40 x 40 x 6mm in PCC 1:3:6 adequate quantity of charcoal dust and salt and kalmi shora all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 5 of SSR part I 2009 and incl testing on completion complete all as specified and directed by Engineer-in-Charge. Note:-(i) Main earthing lstrip from earth plate electrode to test point upto length of 7.5 meters length shall deem to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contrator shall redo the earthing without any extra cost to the department.

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size10.0 sq mm 2 core complete all as specified and directed by Engineer-in-Charge.

Supply and laying of GI tubing dia 40 mm light grade with all fittings laid in trenches fixed on wall or along the pole for protection of LT cable including providing of suitable size clamps complete all as specified and directed by Engineer-in-Charge.

Sand cushioning to under ground cable 8 cm thick layer below the cable and 15 cm thick above the cable complete all as specified and directed by Engr-in-charge.

Brick protection with well burnt sub class ‘B’ brick a butting each other( width wise) across the cable laid in trenches complete all as specified and directed by Engr-in-charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core Complete all as specrified and directed by Eng-in charge

Supply, erecting and fixing steel tubular swaged poles type 410 SP-31, 9 meter long, complete with cast iron base plate, final taper plug, bolts, nuts and screws as specified including painting with two coats of aluminium paint over one coat of red oxide primer and 06 Nos bands/ straps with white and red post office box colour (30 cm wide each) synthetic enamel paint at a distance 30 cm from plinth block and numbering of poles with black synthetic enamel paint in 2.5 cm height including black bitumineous paint two coats on steel surface embedded in concrete foundation complete all as directed by Engr-in-Charge. Note:-(Excavation and earth work, pcc foundation concrete shall be measured and paid separately)

Supply and fixing of energy saving environmental friendly, long life, exclusive innovative epoxy powder coated dia cast aluminium housing IP 65 flood light with high power LEDs as light sources, suitable for high lighting archchitectural features or retail spaces as 150 watt LED 6000K complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of hot pressed moulded SMC pole mounted street light junction box, size of 240x130x110mm, weather proof, shockproof and rust proof including pole mounting arragement tamper proof fire retardant, rust and termite proof provision of 4 Nos aluminium busbar with 3 Nos hole each busbar of capacity 200 Amps monted on epoxy insulator with provision of MCB SP 5 Amps 'B' series including taking out unserviceable broken/rusted box of any size and type including provision cable c/p galnds lugs for incoming & outgoing cable duly clamping all as directed making necessary eletric connection complete all as specified and directed by Engineer-in-Charge.

Supplying, installing and commissioning of LT feeder box, outdoor type of size 0.90m x 0.60m x 0.50 m, made out of MS sheet 3.15mm thick, legs made out of angle iron 40mmX40mmX6mm, 1.50m long (1.00m above ground level and 0.50m embedded in PCC (1:2:4), with openable shutter on both side (front and rear) having locking arrangement with 300 Amp rated aluminium bus bar suitable for 3 phase, 4 wire supply, drilled holes for cable connection, mounted on epoxy based post insulators and MCCB 4 pole, 63 Amp, 415 volt, 16 KA - 01 Nos complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 3 core twisted Aluminum cable PVC insulated and unsheathed multistranded weather proof of size 2.50 Sqmm duly protected with heavy duty conduit 25mm dia including accessories duly clamping GI 25X3mm (04 Nos minimum) to pole from junction box to fitting including lugging complete all as specified and directed by Engineer-in-Charge.

Supply and fixing ceiling fan complete with down rod of suitable lengthe as required at site, 230 V, 1200mm sweep including mounting arrangements complete all as specified and directed by the Engr-in-charge.

Supply & Fixing LED box type fitting pre-wired with LED tube rod of rating minimum 18W prewired fabricated out of CRCA sheet including connecting terminals, 230 volts, 50Hz complete all as specified and directed by the Engr-in-charge.

Supply and fixing water heater storage type, electric supplied and installed complete incl all PVC connections and having copper tank of capacity 25 litres including mounting arrangements complete all as specified and directed by the Engr-in-charge.

Suppliy and fixing submain wiring alongwith earth wire with size 2x4 sqmm + 1x4 sqmm of FRLS PVC insulated copper conductor, single core cable in and including recessed in wall including making good to the disturbed surfaces matching with existing complete all as specified and directed by the Engr-in-charge.

Cutting of existing water supply maing any size upto 25mm for taking branch connection for taking branch connection of size 15mm including insertion of Tee unegual complete all as specified and directed by the Engr-in-charge.

Earthing complete with galvanized steel earth plate electrode of size 600x600x6 mm thick burried directly in ground less than 2.25m deep below normal ground level as earth electrode with top edge of earth plate not less than 1.5 mtr below ground level using 32x6 GI strip as earth continuity conductor connected to earth plate by means of welding, GI thimble, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade 15 mm dia from earth plate to main switch board/ panel, watering pipe 20 mm dia with wire mesh and funnel at top, earth pit and RCC pit cover with handle of angle iron frame of size 40x40x6mm in PCC 1:3:6 adequate quantity of charcole dust and salt and kalmi shora all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 5 of SSR Part I 2009 or directed by Engineer-in-Charge and including testing on completion. NOTE:- (i) Main earthling lead from earth plate electrode to test point upto length of 7.5 meters length shall deem to be included in the unit rate quoted against this item. (ii) GI protection pipe & earthling lead beyond 7.5 metre shall be deemed to be included in the quoted rate). (iii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthling without any extra cost to the department.

pardeep singh marwaha

M/S G P MARWAHA

Surya & Gautam Builders

M/S HEAVEN BUILDERS AND ENGINEERS

new hi tech engineers and contractors

Vijay Kumar Contractor and Engineers