Rate contract for Repairing of EI and Other Electrical works at various TE Bldgs and BTS sites under Rohtak BA

Amount

Replacement of existing 36 /40W Fluorescent defective /faulty tube fittings with 4'-1x20/ 22Watt prewired PVC Batten type LED fitting (with LED tube rod) complete and fixing directly on ceiling / wall i/c making connections with 1.5 sq.mm. PVC insulated copper conductor, cable as reqd. (M/s Bajaj/Philips/ Havell's/ Surya/Crompton)

Repairing of following fans i/c dismantling the same from site, rewinding the same with super enameled copper wire of suitable gauge Varnishing etc., replacement of Bal bearings/ greasing etc. and reinstallation of the same back at site after repairing, making connections testing etc. as required.

Ceiling Fans (48''/56'' sweep)

Exhaust Fan (18'' Sweep)

Wall Fans (16'') sweep

Replacement of following defective/burnt items of Electrical installation/MCB DB/wiring /Panels i/c dismantling the defective/burnt one making connections testing etc. as required.

100Amps Kit Kat Fuse (Porcelain type) ISI Mark

200 Amps Kit Kat Fuses (Porcelain type) ISI Mark

63AMPs 4 Pole isolator (Approved Make)

63AMPs 4 Pole triple pole and neutral MCB (Approved Make)

6-32Amps SPMCB (Approved Make)

32Amps DP MCB (Approved Make)

45W LED compound light fitting (IP 66 rating) suitable for 230V 50HZ AC Supply (M/s Bajaj/Philips/Havell's/ Surya /Crompton)

36-Watt Electronic Choke (M/s Bajaj/Philips/Havell's/ Surya /Crompton)

Starter for 40W Fluorescent tube fitting ISI Mark

4'-36 W fluorescent tube rod (M/s Bajaj/Philips/Havell's/ Surya /Crompton)

LED -9 W,230V-50HZ rating (M/s Bajaj/Philips/Havell's/ Surya/Crompton)

Supplying and drawing 2x1.5 Sqmm PVC insulated copper conductor cable ISI Mark

Supplying and drawing 2x4 Sqmm PVC insulated copper conductor cable ISI Mark

Supplying and drawing 2x6 Sqmm PVC insulated copper conductor cable ISI Mark

20mm Dia PVC conduit pipe a/w accessories i/c fixing the same on wall surface for covering various wires

2.5Mfd Capacitor for ceiling Fan ISI Mark

Electronic Fan Regulator (ISI Mark)

5/6Amps Piano type switch (Approved Make)

5/6 Amps 6 Pin Piano type Socket (Approved Make)

15/16 Amps Piano type Switch (Approved Make)

15/16 Amps 6 Pin Piano type Socket (Approved Make)

100 Amps 3 Pole 10 KA MCCB (Approved Make)

100 Amps 4 Pole 10 KA MCCB (Approved Make)

MS Enclosure fabricated out of 16 SWG MS Sheet having sufficient space to house 100/200 Amps 3phase MCCB/Kit Kat fuses Complete as required.

Extension board with 5 Nos 5-way 6Amps multi sockets and common switch with five meters PVC insulated sheathed copper conductor flexible cable of 1.1 kVA Grade complete as required. (ISI Marked)

Contactor (MN -A1 OR Similar compatible model) -10 A suitable for 3 Phase 415V AC mains supply

Replacement of following defective/burnt items of Electrical installation/MCB DB/wiring /Panels i/c dismantling the defective/burnt one making connections testing etc. as required.

63 Amps 415 V rating three phase Changeover switch housed in sheet steel enclosure with side handle (Approved Make)

100 Amps 415 V rating three phase Changeover switch housed in sheet steel enclosure with side handle (Approved Make)

100 Amps 415 V rating three phase front Operated Changeover switch for existing MV Panel (Approved Make)

63 Amps 415 V rating three phase front Operated Changeover switch for existing MV Panel (Approved Make)

Repairing of 3 HP Monoblock Pump and 3 Phase Motor of Monoblock type water pump motor set i/c dismantling the same from site, checking and tracing out the faults, checking the windings continuity, and rewinding the same with super enameled copper wire, varnishing etc. replacement of bearings /bush /greasing and servicing of pump i/c replacement of worn-out bush/impeller and other defective parts for smooth functioning, reassembling the same and reinstallation back at site making connections complete testing commissioning as required.

Wiring for light point/Fan point/exhaust fan point /call bell point with 1.5 Sqmm FRLS PVC insulated Copper conductor cable in surface/recessed medium class PVC conduit with piano type switch phenolic laminated sheet suitable size MS box and earthing the point with 1.5Sqmm FRLS PVC insulated copper conductor cable as required

Group A

Replacement of following type 12way double door Single pole and neutral sheet steel MCB DB 240V on surface/recess complete with tinned copper busbar neutral busbar earth bar din bar interconnections powder painted i/c earthing etc. as required.

4way (4+12) double door Triple pole and neutral sheet steel MCB DB 415V rating

12way double door Single pole and neutral sheet steel MCB DB 240V

Replacement of following size faulty/ damaged aluminum armored PVC insulated PVC sheathed/XPLE Power cable of 1.1KV Grade including supplying and laying of the new cable from Electricity energy meter to DG AMF Panel in open/through pole / other existing supports/ open in air /surface as per suitability at site i/c making connections at consumer end etc. as per actual requirements at site (as per directions issued by the Engineer in charge)

2x6 Sqmm (PVC insulated aluminum armored cable)

4x16 Sqmm (PVC insulated aluminum armored cable)

3-1/2x35 Sqmm (PVC insulated aluminum armored cable)

3-1/2 x50 Sqmm (PVC insulated aluminum armored cable)

3-1/2 x 70 Sqmm (PVC insulated aluminum armored cable)

Checking, tracing out and removing the electrical installation faults in TE/BTS as per following distances from district Main Exchange under Rohtak BA i/c replacement of burnt/ faulty pieces of wires/ cables/thimbles/making new cable terminations making good the damages/ jointing etc and restoring the Electrical mains/DG Supply as per site requirements.

Within (0- 10 KM)

Within 25 KM

Between 25KM to 50 KM

Refilling of following Capacity Fire extinguishers installed at various TE/BTS Sites of Rohtak BA i/c dismantling the same from site for refilling, Checking the weight/ Pressure of Fire extinguisher, i/c taking the same from site to the Refilling Plant, Testing the same and refilling up to the recommended pressure , Pasting the Refilling Schedule slip/Tag , bringing back the refilled Fire extinguisher a site and i/c Supplying (if required)/fixing the same on wall with suitable clamp complete as required.

4.5 KGS CO2 type extinguisher

5/6KG Capacity ABC type Fire Extinguisher

Replacement of following defective items of fire extinguishers i/c dismantling the existing defective/worn out ones, refixing the new items properly, testing the operation of same at site as required.

Rubber Hose (One meter length)

Pressure gauge of ABC type Fire extinguisher

Brass Valve of Fire Extinguisher

Replacement of following size damage/defective GI pipe i/c replacement required accessories plumbing work for 3HP/5HP pump complete as reqd. (Approved Make)

Replacement of following defective parts in 3HP/5HP pump i/c replacement required accessories plumbing work complete as reqd. (Approved Make)

80 mm Dia Foot valve (gun metal)

50 mm Dia Foot valve (gun metal)

25mm Gate Valve for water Pipeline

40mm Gate Valve for water pipe line

Less on a/c of dismantled material (old tube fittings/burnt cable etc.)

RRJK Engineers OPC Pvt Ltd (BID ID -846717)

R.K.DIESEL SERVICE (BID ID -846166)

D K ELECTRIC WORKS (BID ID -845222)

wadhwa brothers (BID ID -846352)