NIT NO. 186/Durg(Durg)/2026

TS ESTIMATE FOR S/R & MOW WORK OF RESIDENTIAL BUILDING UNDER P.W.D. SUB DIVISION NO. 1, DURG (C.G.)

P.A.C. Rs. 80.00 LAKHS

S. No. Cha- pter No. Item No. Sub Item No. Particulars Quantity Unit Rate Amount

1 1 1 1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. In all types of soils. 260.00 Cum 185.00 4810000

2 18 30 1 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 18.30.1 5mm thick mirror 5mm thick mirror 16.50 Sqm 2016.00 3326400 80.00 Lakhs

3 19 17 1 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore 40.00 Each 284.00 1136000

4 1 17 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M. 220.00 Cum 65.00 1430000

5 1 18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. 780.00 Cum 371.00 28938000 80.00 Lakhs

6 8 159 Providing and fixing IS: 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc complete. 6.00 Each 1053.00 631800

7 7 5 4 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) 59.00 Cum 3263.00 19251700

8 12 65 1 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm Plain/ normal coloured precast interlock concrete block 330.00 Sqm 436.00 14388000

9 16 26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 20.00 Each 100.00 200000

10 16 28 Taking out door shutters (steel or wood) including stacking within 50 metres lead. 50.00 Each 46.50 232500 80.00 Lakhs

11 16 29 Taking out window shutters (steel or wood) including stacking within 50 metres lead. 80.00 Each 33.50 268000

12 16 3 3 Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead. In cement mortar. 83.71 Cum 263.00 2201600

13 16 10 Dismantling cement asbestos or other hard board ceiling or partition wall including stacking of serviceable material and disposal of unserviceable material within 50m lead. 98.15 Sqm 13.50 132500

14 16 36 Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base. 1020.50 Sqm 22.50 2296100 80.00 Lakhs

15 16 37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 1690.30 Sqm 11.00 1859300

16 16 43 2 Demolishing cement concrete including disposal of material within 50 metre lead. 1:3:6 or richer mix 78.20 Cum 549.00 4293200

17 3 1 3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 48.20 Cum 2970.00 14315400

3 1 2 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). 48.36 Cum 2659.00 12858900 80.00 Lakhs

18 3 1 4 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size). 48.00 Cum 3552.00 17049600

19 18 25 1 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia 50.00 Each 68.50 342500 80.00 Lakhs

20 4 13 1 Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 41.80 Cum 3817.00 15955100

21 18 13 1 Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete: Flat back half stall urinal of size 460x380x250mm 20.00 Each 1776.00 3552000

22 18 77 1.2 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm 80.00 Each 154.00 1232000 80.00 Lakhs

23 8 29 2 Providing and fixing plain jaffri door, windows shutters excluding, 35x10mm laths placed 35 mm apart including fixing 50x12 mm beading complete excluding hinges with. Bijasal, Haldu, Benteak, Khair 36.20 Sqm 1780.00 6443600

24 8 132 2 Providing and fixing stainless steel butt hinges IS : 12817 marked with necessary stainless steel screws etc complete. 125x2.5mm (heavy) 127.00 Each 76.50 971600

25 8 137 1 Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete.300mm 60.00 Each 238.00 1428000 80.00 Lakhs

26 8 138 1 Providing and fixing stainless steel door latch with 12mm rod, 2.5mm thick flap, necessary stainless steel screws etc complete.300mm 60.00 Each 92.50 555000

27 8 139 1 Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. 250 x10mm 80.00 Each 97.00 776000

28 8 140 1 Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete. 150 mm 80.00 Each 24.50 196000

29 9 11 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer. 60.00 Sqm 3330.00 19980000

30 9 16 2 Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Angle-iron frames 1080.20 Kg 73.50 7939500 80.00 Lakhs

31 9 6 2 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 2080.40 Kg 68.00 14146700

32 9 42 2 Providing and fixing in position welded steel wire fabric to concrete/ wooden/ angle iron posts including securing and screwing with G.I. tying wire, G.I. staples, G.I.U-nails or steel pins etc., complete Aperture 50x25mm 240.80 Sqm 569.00 13701500

33 9 43 1 Providing and fixing in position chain linked steel wire fabric made of 4 mm dia G.I. wire of required width in mesh to concrete/ wooden/ angle iron posts including securing and screwing with 2mm dia G.I. wire, G.I. staples, G.I.U-nails or steel pins etc., complete. Aperture 50x50mm 411.10 Sqm 331.00 13607400

34 9 1 Structural steel work in single section including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. 1210.00 Kg 61.50 7441500 80.00 Lakhs

35 9 47 1 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: For fixed portion 55.00 Kg 331.00 1820500

36 9 47 2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately). 55.00 Kg 338.00 1859000

37 8 1 2 Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position. Sal, bijasal, benteak, khair, haldu 19.00 Cum 61051.00 115996900

38 9 51 2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness 120.80 Sqm 708.00 8552600 80.00 Lakhs

39 10 11 Supply and fixing of precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 480.00 Sqm 636.00 30528000

40 10 17 Providing asbestos cement 6mm thick corrugated or semi corrugated sheets roofing fixed with galvanized J or L hooks, bolts and nuts 8mm dia G.I. plain bitumen washers complete excluding the cost of purlins, rafters and trusses. 46.50 Sqm 347.00 1613600

41 10 25 2 Providing and fixing corrugated fibre glass sheet roofing in any shade/ colour fixed with G.I. ‘J’ hooks, bolts, nuts and washers etc. complete but excluding cost of purlins, rafters, trusses etc. with: 2.00mm thick fibre glass sheet 48.80 Sqm 610.00 2976800 80.00 Lakhs

42 10 26 2 Providing and fixing plain fibre glass sheet roofing in any shade/ colour fixed with G.I. ‘J’ hooks, bolts, nuts and washers etc. complete but excluding cost of purlins, rafters, trusses etc. with: 52.40 Sqm 563.00 2950100

43 8 151 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge. 68.20 Met. 346.00 2359700

44 8 149 1 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. 24 mm thick door shutters with styles and rails of size 59x24 mm 90.80 Sqm 2399.00 21782900

45 11 1 2 Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand) 490.40 Sqm 87.00 4266500

46 11 2 4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 620.00 Sqm 91.50 5673000

47 11 2 3 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:5 (1 cement : 5 fine sand) 490.00 Sqm 96.50 4728500 80.00 Lakhs

48 11 3 4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 620.00 Sqm 107.00 6634000

49 11 5 4 Neat Cement punning. 120.90 Sqm 33.00 399000

50 12 3 2 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50 mm thick 440.60 Sqm 254.00 11191200

51 12 7 1 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete. Size upto 200x300mm 310.80 Sqm 587.00 18244000

12 7 2 Size above 200x300mm 120.10 Sqm 646.00 7758500 80.00 Lakhs

52 12 9 1 Providing and laying ceramic glazed floor tiles 300x300mm conforming to IS : 15622 of approved make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. In colours such as White, Ivory, Grey, Fume Red Brown, Size 300x300mm 480.00 Sqm 692.00 33216000

2 Size above 300x300mm 120.00 Sqm 728.00 8736000

53 9 13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer. 430.00 Kg 75.00 3225000

54 12 10 1 Providing and laying rectified ceramic glazed floor tiles of size 300x300mm and above conforming to IS : 15622 of approved make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete.Size 300x300mm 240.60 Sqm 858.00 20643500

55 12 13 1 Providing and laying vitrified floor tiles with double charge/ multi charge printing with water absorption less than 0.5% and conforming to IS : 15622 of approved make in all colours and shades and size mentioned below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size 600x600mm 260.00 Sqm 1151.00 29926000

56 12 59 Providing and fixing un-polished 45mm to 50mm thick RAJIM SAND STONE in floors laid on sand bed of average thickness 50mm and pointing with cement mortar 1:3 (1 cement : 3 coarse sand) including finishing complete. 50.00 Sqm 280.00 1400000 80.00 Lakhs

57 18 4 1 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White pedestal type 10.00 Each 2882.00 2882000

58 17 1 1 Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of ubbish to the dumping ground within 50metres lead : Thickness upto 15mm 680.50 Sqm 132.00 8982600

59 18 7 1 Providing and fixing 10 litre capacity P.V.C. low level flushing cistern conforming to IS : 7231, with all fittings and fixtures complete. White 10.00 Each 729.00 729000

60 18 1 1 Providing and fixing water closet squatting pan (Indian type W.C. pan), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Long pattern W.C. pan of size 580 mm 15.00 Each 2459.00 3688500

61 18 15 Providing and fixing one piece construction white vitreous china squatting plate urinal with an integral rim longitudinal flushing pipe, standard size G.I. flush pipe for back and front flush, C.P. brass coupling complete including cutting and making good the walls and floors etc. wherever required : 8.00 Each 2014.00 1611200

62 18 20 Providing and fixing stainless steel AISI-304(18/8) wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : Size 450x380 mm 4.00 no. 3876.00 1550400 80.00 Lakhs

63 18 17 1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450 mm 10.00 Each 1430.00 1430000

64 18 76 1 Providing and fixing on wall face UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 75 mm dia pipe. 175.00 Met. 182.00 3185000

65 18 77 1.1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 75 mm 50.00 Each 113.00 565000 80.00 Lakhs

2.1 Double "Y" with or without door 75 mm 20.00 Each 129.00 258000

3.1 Vent covel 75 mm 20.00 Each 34.00 68000

4.1 Access door cap 75 mm 16.00 Each 49.50 79200

5 "P" trap 110mmx110mm long 15.00 Each 227.00 340500

6 Nahani trap 110x75mm 30.00 Each 90.50 271500

7 Multi floor trap 110 10.00 Each 122.00 122000

8 Plain reducing Tee 110x75mm 10.00 Each 129.00 129000

66 19 4 1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia .Pipes. 100.00 Met. 110.00 1100000

2 20 mm nominal outer dia .Pipes. 140.00 Met. 151.00 2114000

3 25 mm nominal outer dia .Pipes. 60.00 Met. 199.00 1194000

67 19 8 1 19.8 Providing and fixing concealed in wall G.I. pipes medium class complete with G.I. fittings and clamps, including painting with anti corrosive bitumastic paint, cutting chases, making good the walls etc. and testing of joints complete: 15 mm dia nominal bore 25.00 Met. 188.00 470000 80.00 Lakhs

2 20 mm dia nominal bore 30.00 Met. 221.00 663000

3 25 mm dia nominal bore 41.00 Met. 297.00 1217700

68 19 9 1 Providing and laying in trenches G.I. pipes medium class complete with G.I. fittings including excavation of trenches, refilling the same and testing of joints complete: 15 mm dia. nominal bore 120.40 Met. 131.00 1577200

2 20 mm dia. nominal bore 25.00 Met. 159.00 397500

69 19 11 1 Providing and fixing G.I. Union in G.I. pipe(New work) including cutting and threading the pipe and making long screws tc. complete: 15 mm nominal bore 10.00 Each 85.00 85000

2 20 mm nominal bore 10.00 Each 98.00 98000

3 25 mm nominal bore 8.00 Each 117.00 93600

70 19 12 1 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore. 20.00 Each 186.00 372000

2 20 mm nominal bore. 7.00 Each 199.00 139300 80.00 Lakhs

3 25 mm nominal bore. 7.00 Each 218.00 152600

71 19 13 1 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: Bib cock (250 grams) 70.00 Each 185.00 1295000

2 Bib cock (350 grams) 34.00 Each 237.00 805800

3 Stop cock (350 grams) 34.00 Each 237.00 805800

72 19 14 1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) 20.00 Each 382.00 764000

2 Long nose bib cock (500 grams) 30.00 Each 455.00 1365000

3 Long body bib cock (500 grams) 50.00 Each 426.00 2130000

4 Piller Cock (400 grams) 20.00 Each 398.00 796000

5 Two way bib cock (800 grams) 7.00 Each 708.00 495600

6 Stop cock (concealed) (600 grams) 7.00 Each 494.00 345800

7 Angle valve for basin mixer and geyser points (450 grams) 4.00 Each 382.00 152800

8 Basin mixer pillar tap with spout (1000 grams) 3.00 Each 1248.00 374400

9 Kitchen sink mixer with cast swivel spout (1000 grams) 3.00 Each 1248.00 374400

10 Wall mixer with elegant knob (1400 grams) 3.00 Each 1787.00 536100

11 Hand shower set with flexible extension pipe 4.00 Each 754.00 301600 80.00 Lakhs

12 Bottle trap set with extension pipes each 3.00 Each 473.00 141900

13 Toilet paper holder 3.00 Each 248.00 74400

14 Soap dish plate 3.00 Each 163.00 48900

15 Shower rose (revolving type) (150mm) 15.00 Each 269.00 403500

16 Towel rail (600mm long x 20mm dia) 15.00 Each 338.00 507000

17 Towel ring (150 mm dia) 3.00 Each 254.00 76200

18 Wall mixer (telephonic type) with crutch arrangement for hand shower (1400gms) 3.00 Each 1764.00 529200

19 Health foscet (hand jet) with flexible connection pipe (for WC) 3.00 Set 774.00 232200

20 CP brass water jet to be fixed in seat cover of WC with flexible connection pipe 3.00 Set 577.00 173100

73 19 15 Providing and fixing stainless steel drain jali of approved make/quality. 7.00 Each 51.00 35700

74 19 16 1 19.16 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm nominal bore 6.00 Each 436.00 261600

2 32 mm nominal bore. 6.00 Each 510.00 306000

75 19 47 Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone ggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a loating coat of neat cement complete as per standard design : 20.00 Each 754.00 1508000

76 19 42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 12000.00 Liter 7.30 8760000 80.00 Lakhs

77 19 18 1 Providing and fixing gun metal non- return valve (horizontal type) of approved quality (screwed end) : 25 mm nominal bore 10.00 Each 413.00 413000

78 19 48 Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 8.00 Each 4644.00 3715200

79 19 49 Constructing masonry Chamber 90x90x100 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone ggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 8.00 Each 8013.00 6410400

80 19 50 Constructing masonry Chamber 120x120x100 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 10.00 Each 11021.00 11021000

81 19 51 Constructing masonry Chamber 60x60x75 cm, inside with modular well urnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 10.00 Each 4356.00 4356000

82 19 52 Constructing masonry Chamber 60x45x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand :10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 10.00 Each 4133.00 4133000

83 20 1 2 Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter 200.00 Met. 262.00 5240000 80.00 Lakhs

84 20 2 2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete 150mm thick as per standard design: 150 mm diameter S.W. pipe 200.00 Met. 436.00 8720000

85 7 7 5 6 4 + Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 88.90 Cum 3384.00 30083800

86 8 12 2 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 35 mm. thick (single leaf) 67.90 Sqm 2005.00 13614000

87 9 15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. 600.00 Kg 67.50 4050000

88 10 61 Providing and fixing at all height false ceiling consisting of frame work "W" / "U" / "L" sections made of G.I. sheet with zinc coating of grade 120 consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.55mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed including providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part-I all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. 283.20 Sqm 658.00 18634600

89 17 2 1 Providing and replacing broken floor tile with ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including removing the broken tile and mortar, pointing the joints with white cement mixed with matching pigment etc., complete. Size 300x300mm 110.90 Sqm 1151.00 12764600

90 9 34 Providing and fixing stainless wire gauge of average width of aperture 1.56mm with wire of 0.35mm to existing steel door, window shutter frames with necessary M.S. strip beading etc. complete. 250.10 Sqm 791.00 19782900

Total 799956700 80.00 Lakhs

Say Rs. 80.00 Lakhs

RUPEES EIGHTY LAKHS ONLY

NIT SCHEDULE FOR S/R & MOW WORK OF RESIDENTIAL BUILDING UNDER P.W.D. SUB DIVISION NO. 1, DURG (C.G.)

P.A.C. Rs. 80.00 LAKHS

S. No. Cha- pter No. Item No. Sub Item No. Particulars Quantity Unit Rate Amount

1 1 1 1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. In all types of soils. 260.00 Cum 185.00 4810000

2 18 30 1 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 18.30.1 5mm thick mirror 5mm thick mirror 16.50 Sqm 2016.00 3326400 79.63 Lakhs

3 19 17 1 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore 40.00 Each 284.00 1136000

4 1 17 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M. 220.00 Cum 65.00 1430000

5 1 18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. 780.00 Cum 371.00 28938000 79.63 Lakhs

6 8 159 Providing and fixing IS: 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc complete. 6.00 Each 1053.00 631800

7 7 5 4 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) 59.00 Cum 3263.00 19251700

8 12 65 1 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm Plain/ normal coloured precast interlock concrete block 330.00 Sqm 436.00 14388000

9 16 26 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 20.00 Each 100.00 200000

10 16 28 Taking out door shutters (steel or wood) including stacking within 50 metres lead. 50.00 Each 46.50 232500 79.63 Lakhs

11 16 29 Taking out window shutters (steel or wood) including stacking within 50 metres lead. 80.00 Each 33.50 268000

12 16 3 3 Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead. In cement mortar. 83.71 Cum 263.00 2201600

13 16 10 Dismantling cement asbestos or other hard board ceiling or partition wall including stacking of serviceable material and disposal of unserviceable material within 50m lead. 98.15 Sqm 13.50 132500

14 16 36 Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base. 1020.50 Sqm 22.50 2296100 79.63 Lakhs

15 16 37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 1690.30 Sqm 11.00 1859300

16 16 43 2 Demolishing cement concrete including disposal of material within 50 metre lead. 1:3:6 or richer mix 78.20 Cum 549.00 4293200

17 3 1 3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 48.20 Cum 2970.00 14315400

3 1 2 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). 48.36 Cum 2659.00 12858900 79.63 Lakhs

18 3 1 4 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size). 48.00 Cum 3552.00 17049600

19 18 25 1 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia 50.00 Each 68.50 342500 79.63 Lakhs

20 4 13 1 Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 41.80 Cum 3817.00 15955100

21 18 13 1 Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete: Flat back half stall urinal of size 460x380x250mm 20.00 Each 1776.00 3552000

22 18 77 1.2 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm 80.00 Each 154.00 1232000 79.63 Lakhs

23 8 29 2 Providing and fixing plain jaffri door, windows shutters excluding, 35x10mm laths placed 35 mm apart including fixing 50x12 mm beading complete excluding hinges with. Bijasal, Haldu, Benteak, Khair 36.20 Sqm 1780.00 6443600

24 8 132 2 Providing and fixing stainless steel butt hinges IS : 12817 marked with necessary stainless steel screws etc complete. 125x2.5mm (heavy) 127.00 Each 76.50 971600

25 8 137 1 Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete.300mm 60.00 Each 238.00 1428000 79.63 Lakhs

26 8 138 1 Providing and fixing stainless steel door latch with 12mm rod, 2.5mm thick flap, necessary stainless steel screws etc complete.300mm 60.00 Each 92.50 555000

27 8 139 1 Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. 250 x10mm 80.00 Each 97.00 776000

28 8 140 1 Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete. 150 mm 80.00 Each 24.50 196000

29 9 11 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer. 60.00 Sqm 3330.00 19980000

30 9 16 2 Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Angle-iron frames 1080.20 Kg 73.50 7939500 79.63 Lakhs

31 9 6 2 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 2080.40 Kg 68.00 14146700

32 9 42 2 Providing and fixing in position welded steel wire fabric to concrete/ wooden/ angle iron posts including securing and screwing with G.I. tying wire, G.I. staples, G.I.U-nails or steel pins etc., complete Aperture 50x25mm 240.80 Sqm 569.00 13701500

33 9 43 1 Providing and fixing in position chain linked steel wire fabric made of 4 mm dia G.I. wire of required width in mesh to concrete/ wooden/ angle iron posts including securing and screwing with 2mm dia G.I. wire, G.I. staples, G.I.U-nails or steel pins etc., complete. Aperture 50x50mm 411.10 Sqm 331.00 13607400

34 9 1 Structural steel work in single section including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. 1210.00 Kg 61.50 7441500 79.63 Lakhs

35 9 47 1 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: For fixed portion 55.00 Kg 331.00 1820500

36 9 47 2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately). 55.00 Kg 338.00 1859000

37 8 1 2 Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position. Sal, bijasal, benteak, khair, haldu 19.00 Cum 61051.00 115996900

38 9 51 2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness 120.80 Sqm 708.00 8552600 79.63 Lakhs

39 10 11 Supply and fixing of precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 480.00 Sqm 636.00 30528000

40 10 17 Providing asbestos cement 6mm thick corrugated or semi corrugated sheets roofing fixed with galvanized J or L hooks, bolts and nuts 8mm dia G.I. plain bitumen washers complete excluding the cost of purlins, rafters and trusses. 46.50 Sqm 347.00 1613600

41 10 25 2 Providing and fixing corrugated fibre glass sheet roofing in any shade/ colour fixed with G.I. ‘J’ hooks, bolts, nuts and washers etc. complete but excluding cost of purlins, rafters, trusses etc. with: 2.00mm thick fibre glass sheet 48.80 Sqm 610.00 2976800 79.63 Lakhs

42 10 26 2 Providing and fixing plain fibre glass sheet roofing in any shade/ colour fixed with G.I. ‘J’ hooks, bolts, nuts and washers etc. complete but excluding cost of purlins, rafters, trusses etc. with: 52.40 Sqm 563.00 2950100

43 8 151 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge. 68.20 Met. 346.00 2359700

44 8 149 1 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. 24 mm thick door shutters with styles and rails of size 59x24 mm 90.80 Sqm 2399.00 21782900

45 11 1 2 Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand) 490.40 Sqm 87.00 4266500

46 11 2 4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 620.00 Sqm 91.50 5673000

47 11 2 3 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:5 (1 cement : 5 fine sand) 490.00 Sqm 96.50 4728500 79.63 Lakhs

48 11 3 4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 620.00 Sqm 107.00 6634000

49 11 5 4 Neat Cement punning. 120.90 Sqm 33.00 399000

50 12 3 2 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50 mm thick 440.60 Sqm 254.00 11191200

51 12 7 1 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete. Size upto 200x300mm 310.80 Sqm 587.00 18244000

12 7 2 Size above 200x300mm 120.10 Sqm 646.00 7758500 79.63 Lakhs

52 12 9 1 Providing and laying ceramic glazed floor tiles 300x300mm conforming to IS : 15622 of approved make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. In colours such as White, Ivory, Grey, Fume Red Brown, Size 300x300mm 480.00 Sqm 692.00 33216000

2 Size above 300x300mm 120.00 Sqm 728.00 8736000

53 9 13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer. 430.00 Kg 75.00 3225000

54 12 74 1 Providing & fixing rectified glazed ceramic Floor tiles of 1st quality conforming to IS: 15622-2017 of approved make, in all colours, shade over 20 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete. (Size 300X300mm thicness 7 to 8mm) 240.60 Sqm 779.00 18742700

55 12 79 1 Providing & laying DOUBLE/MULTI CHARGE (minimum 2.0mm thick layer) VETRIFIED floor tiles with water absorption less than 0.05% and conforming to IS : 15622-2017 of 1st quality of approved make in all colours shades and size mentioned below (+/ 10mm) laid on 20mm thick cement mortar 1:4(1 cement : 4 coarse sand) i/C grouting the joint with white cement and matchine pigments etc. complete. (Size 600X600mm thicness 9 to 10mm) 260.00 Sqm 1082.00 28132000

56 12 59 Providing and fixing un-polished 45mm to 50mm thick RAJIM SAND STONE in floors laid on sand bed of average thickness 50mm and pointing with cement mortar 1:3 (1 cement : 3 coarse sand) including finishing complete. 50.00 Sqm 280.00 1400000 79.63 Lakhs

57 18 4 1 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White pedestal type 10.00 Each 2882.00 2882000

58 17 1 1 Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of ubbish to the dumping ground within 50metres lead : Thickness upto 15mm 680.50 Sqm 132.00 8982600

59 18 7 1 Providing and fixing 10 litre capacity P.V.C. low level flushing cistern conforming to IS : 7231, with all fittings and fixtures complete. White 10.00 Each 729.00 729000

60 18 1 1 Providing and fixing water closet squatting pan (Indian type W.C. pan), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Long pattern W.C. pan of size 580 mm 15.00 Each 2459.00 3688500

61 18 15 Providing and fixing one piece construction white vitreous china squatting plate urinal with an integral rim longitudinal flushing pipe, standard size G.I. flush pipe for back and front flush, C.P. brass coupling complete including cutting and making good the walls and floors etc. wherever required : 8.00 Each 2014.00 1611200

62 18 20 Providing and fixing stainless steel AISI-304(18/8) wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : Size 450x380 mm 4.00 no. 3876.00 1550400 79.63 Lakhs

63 18 17 1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450 mm 10.00 Each 1430.00 1430000

64 18 76 1 Providing and fixing on wall face UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 75 mm dia pipe. 175.00 Met. 182.00 3185000

65 18 77 1.1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 75 mm 50.00 Each 113.00 565000 79.63 Lakhs

2.1 Double "Y" with or without door 75 mm 20.00 Each 129.00 258000

3.1 Vent covel 75 mm 20.00 Each 34.00 68000

4.1 Access door cap 75 mm 16.00 Each 49.50 79200

5 "P" trap 110mmx110mm long 15.00 Each 227.00 340500

6 Nahani trap 110x75mm 30.00 Each 90.50 271500

7 Multi floor trap 110 10.00 Each 122.00 122000

8 Plain reducing Tee 110x75mm 10.00 Each 129.00 129000

66 19 4 1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia .Pipes. 100.00 Met. 110.00 1100000

2 20 mm nominal outer dia .Pipes. 140.00 Met. 151.00 2114000

3 25 mm nominal outer dia .Pipes. 60.00 Met. 199.00 1194000

67 19 8 1 19.8 Providing and fixing concealed in wall G.I. pipes medium class complete with G.I. fittings and clamps, including painting with anti corrosive bitumastic paint, cutting chases, making good the walls etc. and testing of joints complete: 15 mm dia nominal bore 25.00 Met. 188.00 470000 79.63 Lakhs

2 20 mm dia nominal bore 30.00 Met. 221.00 663000

3 25 mm dia nominal bore 41.00 Met. 297.00 1217700

68 19 9 1 Providing and laying in trenches G.I. pipes medium class complete with G.I. fittings including excavation of trenches, refilling the same and testing of joints complete: 15 mm dia. nominal bore 120.40 Met. 131.00 1577200

2 20 mm dia. nominal bore 25.00 Met. 159.00 397500

69 19 11 1 Providing and fixing G.I. Union in G.I. pipe(New work) including cutting and threading the pipe and making long screws tc. complete: 15 mm nominal bore 10.00 Each 85.00 85000

2 20 mm nominal bore 10.00 Each 98.00 98000

3 25 mm nominal bore 8.00 Each 117.00 93600

70 19 12 1 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore. 20.00 Each 186.00 372000

2 20 mm nominal bore. 7.00 Each 199.00 139300 79.63 Lakhs

3 25 mm nominal bore. 7.00 Each 218.00 152600

71 19 13 1 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: Bib cock (250 grams) 70.00 Each 185.00 1295000

2 Bib cock (350 grams) 34.00 Each 237.00 805800

3 Stop cock (350 grams) 34.00 Each 237.00 805800

72 19 14 1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) 20.00 Each 382.00 764000

2 Long nose bib cock (500 grams) 30.00 Each 455.00 1365000

3 Long body bib cock (500 grams) 50.00 Each 426.00 2130000

4 Piller Cock (400 grams) 20.00 Each 398.00 796000

5 Two way bib cock (800 grams) 7.00 Each 708.00 495600

6 Stop cock (concealed) (600 grams) 7.00 Each 494.00 345800

7 Angle valve for basin mixer and geyser points (450 grams) 4.00 Each 382.00 152800

8 Basin mixer pillar tap with spout (1000 grams) 3.00 Each 1248.00 374400

9 Kitchen sink mixer with cast swivel spout (1000 grams) 3.00 Each 1248.00 374400

10 Wall mixer with elegant knob (1400 grams) 3.00 Each 1787.00 536100

11 Hand shower set with flexible extension pipe 4.00 Each 754.00 301600 79.63 Lakhs

12 Bottle trap set with extension pipes each 3.00 Each 473.00 141900

13 Toilet paper holder 3.00 Each 248.00 74400

14 Soap dish plate 3.00 Each 163.00 48900

15 Shower rose (revolving type) (150mm) 15.00 Each 269.00 403500

16 Towel rail (600mm long x 20mm dia) 15.00 Each 338.00 507000

17 Towel ring (150 mm dia) 3.00 Each 254.00 76200

18 Wall mixer (telephonic type) with crutch arrangement for hand shower (1400gms) 3.00 Each 1764.00 529200

19 Health foscet (hand jet) with flexible connection pipe (for WC) 3.00 Set 774.00 232200

20 CP brass water jet to be fixed in seat cover of WC with flexible connection pipe 3.00 Set 577.00 173100

73 19 15 Providing and fixing stainless steel drain jali of approved make/quality. 7.00 Each 51.00 35700

74 19 16 1 19.16 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm nominal bore 6.00 Each 436.00 261600

2 32 mm nominal bore. 6.00 Each 510.00 306000

75 19 47 Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone ggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a loating coat of neat cement complete as per standard design : 20.00 Each 754.00 1508000

76 19 42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 12000.00 Liter 7.30 8760000 79.63 Lakhs

77 19 18 1 Providing and fixing gun metal non- return valve (horizontal type) of approved quality (screwed end) : 25 mm nominal bore 10.00 Each 413.00 413000

78 19 48 Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 8.00 Each 4644.00 3715200

79 19 49 Constructing masonry Chamber 90x90x100 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone ggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 8.00 Each 8013.00 6410400

80 19 50 Constructing masonry Chamber 120x120x100 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 10.00 Each 11021.00 11021000

81 19 51 Constructing masonry Chamber 60x60x75 cm, inside with modular well urnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 10.00 Each 4356.00 4356000

82 19 52 Constructing masonry Chamber 60x45x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand :10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 10.00 Each 4133.00 4133000

83 20 1 2 Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter 200.00 Met. 262.00 5240000 79.63 Lakhs

84 20 2 2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete 150mm thick as per standard design: 150 mm diameter S.W. pipe 200.00 Met. 436.00 8720000

85 7 7 5 6 4 + Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 88.90 Cum 3384.00 30083800

86 8 12 2 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 35 mm. thick (single leaf) 67.90 Sqm 2005.00 13614000

87 9 15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. 600.00 Kg 67.50 4050000

88 10 61 Providing and fixing at all height false ceiling consisting of frame work "W" / "U" / "L" sections made of G.I. sheet with zinc coating of grade 120 consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.55mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed including providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part-I all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. 283.20 Sqm 658.00 18634600

89 17 2 1 Providing and replacing broken floor tile with ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including removing the broken tile and mortar, pointing the joints with white cement mixed with matching pigment etc., complete. Size 300x300mm 110.90 Sqm 1151.00 12764600

90 9 34 Providing and fixing stainless wire gauge of average width of aperture 1.56mm with wire of 0.35mm to existing steel door, window shutter frames with necessary M.S. strip beading etc. complete. 250.10 Sqm 791.00 19782900

Total 796261900 79.63 Lakhs

Say Rs. 80.00 Lakhs

RUPEES EIGHTY LAKHS ONLY

GENRAL ABSTRACT

S. No. PARTICULAR AMOUNT

1 TS ESTIMATE FOR S/R & MOW WORK OF RESIDENTIAL BUILDING UNDER P.W.D. SUB DIVISION NO. 1, DURG (C.G.) 7999567.00

2 NAME OF BUILDING - Commissioner Bungalow, Collector Bungalow, S.P. Bungalow, EA2, E3,E4,E5,E6,D1,D2,D8,D9,D10,D11 Bungalow Housing Board Quarter F Type -6 No., G Type- 10 No., H Type - 12 No., Old Civil LIne -12 No. H Type Quarter

TOTAL 7999567.00

SAY Rs. 80.00 LAC

GOVERNMENT OF CHHATTISHGARH

PUBLIC WORKS DEPARTMENT

TS ESTIMATE FOR S/R & MOW WORK OF RESIDENTIAL BUILDING UNDER P.W.D. SUB DIVISION NO. 1, DURG (C.G.)

TS ESTIMATED COST Rs. 80.00 Lacs

Executive Engineer

PUBLIC WORKS DEPARTMENT DURG DIVISION,DURG (C.G.)