Construction of Building for High School Buglinder Gurez

Construction of Building Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:

Providing & Laying of stone soling (dully hand packed)including watering dressing and ramming with all carriages and lifts, loading un-loading and stacking etc complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Supply and filling in plinth with RBM / GSB under floors incld. Carriage,watering, raming, consolidating and dressing complete.

Brick work with FPS bricks of class designation 75 in super structure in cement mortar 1:6 (1 cement, 6 coarse sand)

Extra for brick work with common burnt clay bricks in superstructure above plinth level upto floor five level

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcement for RCC work incld straightning, cutting, bending, placing in position & binding all complete (Thermo-mechanically treated bars)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class kail wood

Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).Second kail wood 35mm

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class Kail wood(35mm)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.4 mm thick glass pane (weighing not less than 10 kg/sqm)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 12823 marked.MDF board 12 mm thick

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand)

20mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for:Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platforms.

Centering and shuttering including strutting, propping etc. and removal of form for:Edges of slabs and breaks in floors and walls

Centering and shuttering including strutting, propping etc. and removal of form for:Stairs (excluding landings) except spiral staircases.

Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) :

Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.welded

Providing Hi-Rib roofing sheet including vertical/curved surface fixed with polymer coated J or L hooks or screws with bitumen and G.I limpet washers 0.50 mm including all taxes and carriages complete job as approved by E.I.C

Providing and fixing 600mm wide Hi rib powder coated ridges or hips 0.50mm thick including c/o self driven screws635mm long including all taxes and carriages complete job

P/F 12mm thick T&G planks made of imported wood for roof soffits and ceilings including cost of necessary screws / nails/ adhesive all complete as approved by E.I.C and incl.necessary frame work ,priming and painting.

Providing and fixing plained eaves boarding.300x40 mm (nominal size) 2nd class kail wood

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour:600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing toilet paper holder. C.P. brass

Providing and fixing health faucet with concealed fitting arrangement of approved quality and make

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. 15 mm nominal dia

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing PTMT grating of approved quality and colour.150 mm nominal size square 100 mm diameter of the inner hinged round grating.

Providing and fixing floor traps including all fittings required complete job

Providing and fixing PVC soil, waste and vent pipes:Prince type B 75mm dia

100 mm dia

PVC Floor trap 100mm

PVC Door T 100mm

PVC Collar 100mm

PVC collar 75mm

PVC waste pipe

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.PN-16 pipe, 16mm OD(SDR-7.4)

PN-16 pipe , 20mm OD(SDR-7.4)

PN-16 pipe , 25mm OD(SDR-7.4)

PN-16 pipe , 32mm OD(SDR-7.4)

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15mm nominal bore

20mm nominal bore

25 mm nominal bore

32 mm nominal bore

Providing and fixing uplasticized PVC connection pipe with brass unions 15mm nominal bore

20mm nominal bore

25 mm nominal bore

Supply installation testing and comissioning of water heaters (Geysers) 50 litre capacity ISI marked as approves by E.I.C incl. carriage complete job. jaqure/equivant

Carriage of materials by way of mechanical means. Cement avg. lead of 30 Km

Steel avg. lead of 30 Km

sand/aggregates (20mm) @ 30 km

aggregates (40mm) @ 20 km

Bricks avg. lead of 200 Km

Septic Tank & Soakage Pit Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil : lead 50 meter beyond 1m from cutting edge

Supply & Filling of dry stone soling hand packed under foundations including all carriages from source to site of work complete job

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Dry random rubble masonry with hard stone in foundation and plinth:Nallah:With bond stone.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level:Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate.

15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 fine sand)

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as per standard design :Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Carriage of materials by way of mechanical means. Bricks avg lead of 200 Km

cement avg lead of 30 Km

Steel avg lead of 30 Km

sand/aggregate (20mm) avg lead of 20 Km

agg (40 mm) avg lead of 20 Km

Stones avg lead of 20 Km

FURNITURE S/F of Single Students Desk cum Benches with back support -25mm thick wooden/pre laminated back rest 150mm wide, seat 250mm wide, top 350mm wide cast iron frame (square bars) with Leg bushs. 750mm high 750mm wide and 750mm in length. Incl. carriage complete job

S/F of office VIP Chair with Arm Rest and leather Cushioned seat, back and arm rest. Double pipe frame of stainless steel complete Incl. carriage complete job

S/F OF Sofa set 3 seater made up of wood frame with leather cushion inci all carriages complete.

Center table glass top having 12mm thick glass on top ornamental reducing legs made out of Malaysin teak with provision of magzine shelf with steam beach veener incl all carriages complete

S/F Ergonomical office/computer chair with hyradulic lift, wheel base, arm rest of approved make incl. carriage complete job

Electrification Wiring for Light point/Fan point/Exhaust fan/bell point with (P+N+E) 3x1.5 sq.mm. FRLS-H PVC insulated Muti strand Copper conductor single core cable. Havells/Polycab/Finolex/Eq Make) in surface/recessed conduits laid in slabs (Including Cost of Conduit 25mm) with 01 No.of 6 Amp Modular Switch, Modular Plate, Cover in front & suitable Gl box etc ISO/IEC Certified/Schneider/Havells/Legrand/Anchor roma plus/ABB/Eq.Make& along with 2.5 Sqmm (P+N+E) Circuit Wire of same make as mentinoned above & items shall be approved before execution of work by SDO.

Wiring for Power Plug with (P+N+E) 3 x 4 sq.mm FRLS-H PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit (Havells/Polycab/Anchor/Eq. Make)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required, ISO/IEC Certified/Legran/Anchor roma plus/Schneider/ABB/Eq Make & shall be approved before execution of work by SDO.

Wiring for 6Amp Plug(Computer Point) with (P+N+E) 3 x 2.5 sq.mm FRLS-H PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit (Havells/Polycab/Anchor/Eq. Make)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including provding and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings), ISO/IEC Certified Havells/Legrand/ Anchor roma plus/Schneider/ABB/Eq.Make& shall be approved before execution of work.

wiring for Sub main Wiring along with earth Wire with the following Sizes of FRLS PVC insulated copper conductor,Single core cable in suface/Recessed medium class PVC Conduit (Havells/Polvcab/Eq.Make) & shall be approved Before execution of work (Including Cost of Conduit/Channel). 2x10 sq.mm+ 1x10 sq.mm (P+N+E) for Power point Sub main in One run from Main Panel to Distribution Boards

Supply/Fixing/Testing and Commissioning of 6 Amp to 32Amp Rating SP 240v. *C* Curve 10K. Miniature Circuit Breaker suitable for inductive load of following poles in existing MCB. DB Complete with connections.(L&T/Siemens/Legrand/Havells/ABB/Eq. Make)

Supply/Fixing/Testing and Commissioning of following rating, Double pole, (P+N) 240 V, C* Curve 10K, Miniature Circuit Breaker (MCB) in the existing MCB DB complete with connections. (L&T/Siemens/Legrand/Havells/ABB/Eq Make) 32 Amp

100 Amp for main supply

Supplying and Fixing of MCB 12 way, horizontal typed, sheet steel, Double Door Distribution Board, SPN 240V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc, as required. (L&T/Siemens/Legrand/Schneider/ABB/Eq Make)

Applying/ Installation/Testing and Commissioning of 18W + LED Conceal (Commerical Type) light luminary fitting round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.>0.95.THD<10%.CCT 5700K. CRI 80. The LED with Useful lifeof 50000 Hrs at L 70. The Input voltage range shall be 150V 270V The Fixture should have In-built Surge Protection of 2KV Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/government of India authorised lab. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years, which includes replacement of fixtures of Philips/Havell's/Wipro/Jaquar/Eq Make.

Supply/Installation/Testing and Commissioning of 12W + LED Conceal (Commerical Type) light luminary fitting round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F>0.95 THD<10%, CCT 5700K, CRI 80. The LED with Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150V to 270V The Fixture should have In-built Surge Protection of 2kV.Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/government of India authorised lab. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years, which includes replacement of fixtures of Philips/Havell's/Wipro/Jaquar/Eq Make. (for inverter Points)

Providing & fixing of 1K08 IP-66 Protected high power LED 50 watt flood light systemwith single piece pressure diecast aluminumhousing, toughened glass diffuser with suitable lenses of LED to achieve various beam angle,of high-power LED of 3 to 5 watt eachIntegrated potted driver as a unique BIS R number having efficiency more than 85% and in compliance to BIS certified and trade mark certificate. The System level Luminate efficacy >=125 Im/wt LED Drive input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting safety. Power Factor>=0.95, THD(I)< 10% driver current <=750mA. driver should be Phase to phase protection of 440 V for 4Hrs. Electrical Connector, Surge Protection Min >=4KV internal and 10KV external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lamens maintained, CRI>70 and CCT 5700K 355K manufactures Word Mark/Name Engraved/Embossing/Screen printing on die east housing to allow traceability/authenticity. Fixture shall be IS 10322 No. Complianced OEM Must have its own in house NAIBL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate report with liable warranty of product/accessories from OEM shall be submitted. All as per preapproved by Engineer in charge. For additional technical parameters of products work, refer Annexure "A" attached with this BSR-High Power LED Flood Light Minimum lumen output 6200 Im of Havelis/Crompton/Philips outside block including S/F of Make as approved and to be installed. suitable size of Gyser bolt. The job further includes replacement warranty of fixture (if damaged/burnt out what so ever reason) for a period of twn yours reckoned from date of successful commissioning handing over of site intending department. Havelis/Philips/Wipro/Eq.make.

Supply/Laying/Connecting and Commissioning of 35 sq.mm 2-Core XLPE/PVC insulated and steel armored 1.1 KV grade Aluminum Cable of Havelis/Polycab/Eq. Make with required size of thimbles dully crimped with hydraulic crimping tool including Providing/Fixing of saddles/clips with making of connection and partially to be laid underground through DWC High Density Poly ethylene Pipe having Corrugation on Outer wall and Plain surface inner wall Conforming to IS: 14930 Part-1 and 2 Complete with accessories for Protection of 1.1 KV Grade under Ground cable Directly in Ground at a Depth of 50 CM including excavation and Refilling the Trench (Material to be approved before execution)

ENVIRONMENTALLY SAFE MAINTENANCE FREE OPPER Rod EARTHING SYSTEM Necessary soul treatment is to be made by the contractor in order to improve The Pit resistance Value ,Supplying. Installation and Testing of 75 mm copper Pipe Filled with Crystallineconductive Mixture with Eco friendly GEM Backfill Compound 2No. Bags also having Earth pit chamber (300mm x 300mm) with man-hole cover for the above. Including cost of 20MM Wide copper strip as required in one run fitted with of brass nut bolt & spring washer from EARTHING ROD up to MAIN Control PANEL through DWC High Density Poly ethylene Pipe having Corrugation complete job.

Supply and fixing of PVC ceiling rose (2/3 pin), ISI marked, suitable for connection of light/fan point, complete with necessary accessories, including connections and testing as required of Havells/Anchor/Legrand/Eq.make

Supply and fixing of Hylum sheet (phenolic laminated sheet), 3 mm/6mm/ 10 mm thick (as specified), duly cut to required size and shape, fixed with necessary nuts, bolts, screws, washers, spacers etc., including finishing and making good the surface, complete as required