REPAIR TO BOUNDARY WALL FENCING GATE DRAIN CULVERT PATH ETC UNDER AGE BR I OF GE NORTH MEERUT CANTT

Amount

Excavation in post holes (or similar holes) n.exc 0.50 cum, each in soft/ loose soil , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

M& L for providing Cement concrete 1:3:6 Type C 2 (using 40 mm graded crushed stone aggregates) as in bed block to fencing post complete all as specified and directed.

M& L for providing Cement concrete 1:4:8 Type D 2 (using 40 mm graded crushed stone aggregates) ,in foundations, filling and mass concrete complete all as specified and directed.

M&L for providing Cement concrete 1:3:6 Type C 2 (using 40 mm graded crushed stone aggregates) in suface channels and drains including necessary form work, stops, moulds etc complete all as specified and directed.

M&L for providing cement concrete 1:2:4 Type B 1 (using 20 mm graded crushed stone aggregates) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs hold fast water troughs, filling in pressed steel door frame and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed.

M&L for providing precast cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) louvres and jallies, (Dholpur stone Jafri) 25mm thick (measured solid), including necessary reinforement wire and all mouldings but excluding frame and set in cement mortar 1:4 complete all as specified and directed.

M&L for providing reinforced cement concrete 1:2:4 type B1, Nominal mix, (using 20 mm graded crushed stone aggregates) foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, and mass concrete complete all as specified and directed.

M&L for providing reinforced cement concrete 1:2:4 (nominal mix) type B 1 (using 20 mm graded crushed stone aggregates) as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed. Note :- Inner girth only measured.

M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

All as per Srl item No 10 here-in-before but except bricks -ditto-

M&L for Brickwork with fly ash old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6 complete all as specified and directed.

Supply only Integral water proofing compound (I.S.I marked on packing)complete all as specified and directed.

M& L for providing Broken glass coping on top of walls in cement mortar 1:3 at the rate of 10 Kg glass per sqm of redered surface jogged edged of the glass being left projecting complete all as specified and directed.

M&L for providing formwork to sides of concrete foundations, footings, bases of columns raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to sides of square ,rectangular or polygonal pillars, posts, struts, piers, and columns rough finished surfaces of concrete flat complete all as specified and directed.

S&F mild steel work as for Hand rails, half round or other stock section, nosing to steps in cluding embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.). including necessary riveting and / or welding and similar work conforming to Fe 290 gde E 165 complete all as specified and directed.

S&F mild steel work as for framed work for ornamental and intricate design such as grills gratings, etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed baluster; walk ways; railings; framed work of water tanks and similar work including necessary riveting and / or welding conforming to Fe 290 (Gde-E 165) complete all as specified and directed.

Supplied and fixed mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut 11-15 mm dia of neck and exc 5cm and n exc 10cm long, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.

All as per Srl item No 20 here-in-before but 6mm to 8mm dia

S&F rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to Fe-290 (Gde E-165) complete all as specified and directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, olishing and making curvature (Where ever required) and fititng the same with necessary stainless steel nuts and bolts complete including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

Supply only chain link MS galvanised fencing, heavy zinc coated (Hot Dip) of 3mm nominal dia of wire and mesh of size 50mm x 50mm conforming to IS: 2721-2003 complete all as specified in clause 10.34 on page 214 & 215 of MES SSR - 2009, Part-I and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. Note :- (i) Chaink link fencing & line wire shallbe measured and paid separately in supply only item. (ii) Standards, rails, straing bolts & screw bolts shall also be measured and paid separately.

S & F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. Note : Each line wie to be measured

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions

M&L in repair for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 50mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed. Make : Mehatab tiles, indore ; Tulip Infrastructure, Saharanpur (U.P)

M&L for 18-20 mm thick machine cut perfect black / red granite stone slab on vertical surface, skirting / dado, cooking platform, jams, pillars and other similar works set and jointed in neat cement slurry and pointed in coloured cement to match the colour / shade of granite including necessary rubbing and polishing laid over & including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

S&F in repair for stainless steel words (either in english or hindi) of dimension 10mm thick and 300mm in height / length of any shape fixed to floors (may be inclined) or on vertical surface as in top of gate or in flag posts complete all as specified and directed by the Engineer-in-Charge

M&L for exterior grade, coloured, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick (ULTRA or as indicated in Appendix 'B' to P.S.) set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specifed and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement with using water proofing compound @ 200ml per 50kg of cement consumed) complete all as specified and directed. Note:- water proofing compound will be measured and paid seperately.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and directed.

M & L for applying 15mm thick rendering unsing ready mix plaster bags on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @ of 200ml per 50 kg of cement consumed as per manufacturer instructions, complete all as specified an directed. Note:-Water proofing compound shall be measured and paid sepratly Note Contractor is required to deposit ready mix bags for 100% CA quantity to the Engr-in-Charge within 15 days of acceptance of contract.

M&L for two coats of cement base paint over one coat of primer on old surface on wall including complete removal of existing treatment & washing scrubbing down and stooping of existing treatment and making the surface even and smooth complete all as specified and directed.

M&L for applying two coats of exterior acrylic emulsion paint (weather proof) over a coat of primer including preparation of newly plastered surfaces of walls complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description n exc 10 cm width or girth when un connected with other painting in a different tint and applying two coats of synthetic enameled paint over a coat of red oxide zinc chrome complete all as specified and directed.

M&L for preparation of old painted steel surface of any description over 10 cm in width or girth and applying two coat of white / tinted synthetic enamel paint complete all as specified and directed

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and directed.

Demolition of cement concrete in ground floors and paving n.exc 15cm thickness(below or above ground level) and including removal of debris & rubbish from the site complete all as specified and directed. Note : Stone slabs / tiles and hard core of any description shall not be measured & paid under this item.

Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling of fencing post or struts (wood, steel, RCC) any section , post embedded in concrete , brick work, masonry etc including taking out embedded portion and making good distrubed ground complete all as specified and directed.

Dismantling of fencing wire mesh of any size any description fixed on posts of any kind complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling AC sheet corrugated or semi corrugated sheet of any description as in roof and including removal from the site complete all as specified and directed.

Arun Construction Co.

Manglam Engineers and Construction Co

YADAV CONSTRUCTION COMPANY

M/S AMAR ELEKTRO CENTRE

vibha associates

m/s gupta construction